Please wait…

Please wait while we process your order,
do not press the back button…

Porsche > 992 (911) MK2 2024>> > 992.2 Turbo 3.6L 2024>> > Suspension & Axle > Shock Absorber Parts REAR >

Shock absorber rear strut mounting kit rear Porsche 964 1991>> ❭ 96433305900

3 3 3

Check vehicle fitment

Kits

96433305900/1KIT

Product Information

Shock absorber rear strut mounting kit for Porsche 964 models 1991 onwards, supplying the components needed to mount the rear damper correctly on the chassis.

Kit Includes:

2 x Shock absorber strut mounting, rear 96433305900
2 x Hexagon nut 99908462101
6 x Shock Absorber Washer. 96433310700
2 x Shock absorber bump stops 96433310500
2 x Shock absorber dust covers 96433310600
2 x Washer 91133351100
2 x Shock absorber adjusting nut 96433351303
2 x Shock absorber threaded sleeve 96433351100

What This Product Does This kit provides the rear upper mounting interface between the shock absorber and the body, helping to locate the damper securely and support the suspension loads at the back of the car. Correct mounts assist with consistent geometry and can help reduce unwanted noise from the rear suspension area.

Functions

Supports the rear shock absorber at the upper mounting point
Helps maintain intended rear suspension alignment
Contributes to reducing knocks, rattles and vibration from worn mounts
Provides a bearing interface to allow suspension movement where applicable

Symptoms of Fault

Knocking or clunking noises from the rear over bumps
Vague or unsettled feel from the rear of the car
Rattles linked to loose or perished rear mounting hardware
Visible deterioration or cracking of the rear top mount
Premature wear or damage to rear dampers from poor mounting support

Why Replacement Matters Rear strut mounts on Porsche 964 models carry significant load and are exposed to constant movement and vibration. Over time, rubber components can harden or crack and bearings or hardware can wear, leading to noise and inconsistent damper control. Renewing rear mounts and related hardware when fitting new dampers, or when noise and play are found, supports accurate geometry and can help avoid repeat labour later. Using an OE-equivalent kit tailored to Porsche applications assists with correct fitment when refreshing ageing suspension.

Fits

Porsche 964 (911) (1989–1994)
Porsche 964 (911) C2 1989–93
Porsche 964 (911) C4 1989–93
Porsche 964 (911) Turbo 3.3L 1991–93
Porsche 964 (911) Turbo 3.6L 1991–93

FAQs

Q: Should rear strut mounts be replaced with new rear dampers?
A: They are often renewed at the same time, especially if original or showing signs of wear, to avoid reusing tired mounts.
Q: Could rear knocking be caused by parts other than the damper?
A: Yes, rear top mounts, drop links and bushes are common sources of knocking and should be inspected alongside the dampers.
Q: Any practical tip when fitting a kit like this?
A: Compare the kit contents with the Porsche parts diagram and your existing hardware before starting work so you know what is included and what may still be required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433305900

96433305900

96433310600

96433310500

The product you are viewing cross references to these numbers