Parking Brake cable, for RHD (Right Hand Drive) cars. Porsche 356 C - 69542406000
OE Match
69542406000/1
Product Information
Cable length: 427 mm
Fits:
RHD (Right Hand Drive) cars
Porsche 356 C 1950 - 1965
Diagram ref no 2
• Position on Vehicle: Rear brake system — parking-brake pull cable assembly, typically right-hand side or depending on specification (see model-specific routing).
• Function: Transfers the mechanical pull from the handbrake lever to the rear brakes, enabling the vehicle to be held securely when parked. Ensures full mobility of the handbrake mechanism and correct tension when released.
• Material & Construction: Durable steel cable core with corrosion-resistant outer sleeve, correct Porsche-style fittings at each end, and built to OE specifications for length, flexibility and durability.
• Applications: Ideal when the original cable shows signs of fraying, corrosion, excessive stretch, or when replacing the cable as part of a handbrake system overhaul on a classic Porsche 356.
The parking-brake cable is a vital mechanical link in your vehicle’s safety and convenience systems. When the cable is stretched, corroded or damaged, you may experience:
• Reduced parking-brake holding force
• Excess lever travel before engagement
• Uneven or inadequate brake application on the rear wheels
• Cosmetic, mechanical or corrosion damage at the cable ends or sheathing
Replacing the cable with a correctly unit ensures:
• Reliable and consistent parking-brake performance
• Accurate lever travel and symmetric action
• Restored mechanical integrity of the braking subsystem
• Improved safety for both road and stationary divisions of vehicle use
When to consider replacement:
• The parking-brake lever engages only after excessive clicks or seems weak.
• Visible corrosion, fraying or outer sleeve damage on the original cable.
• Cable has been reused many times or under-maintained.
• During restoration of a classic Porsche 356 where original hardware is aged or absent.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
69542406000
The product you are viewing cross references to these numbers
Product Information
Parking Brake cable, without handle, for RHD (Right Hand Drive) cars.Cable length: 427 mm
Fits:
RHD (Right Hand Drive) cars
Porsche 356 C 1950 - 1965
Diagram ref no 2
• Position on Vehicle: Rear brake system — parking-brake pull cable assembly, typically right-hand side or depending on specification (see model-specific routing).
• Function: Transfers the mechanical pull from the handbrake lever to the rear brakes, enabling the vehicle to be held securely when parked. Ensures full mobility of the handbrake mechanism and correct tension when released.
• Material & Construction: Durable steel cable core with corrosion-resistant outer sleeve, correct Porsche-style fittings at each end, and built to OE specifications for length, flexibility and durability.
• Applications: Ideal when the original cable shows signs of fraying, corrosion, excessive stretch, or when replacing the cable as part of a handbrake system overhaul on a classic Porsche 356.
The parking-brake cable is a vital mechanical link in your vehicle’s safety and convenience systems. When the cable is stretched, corroded or damaged, you may experience:
• Reduced parking-brake holding force
• Excess lever travel before engagement
• Uneven or inadequate brake application on the rear wheels
• Cosmetic, mechanical or corrosion damage at the cable ends or sheathing
Replacing the cable with a correctly unit ensures:
• Reliable and consistent parking-brake performance
• Accurate lever travel and symmetric action
• Restored mechanical integrity of the braking subsystem
• Improved safety for both road and stationary divisions of vehicle use
When to consider replacement:
• The parking-brake lever engages only after excessive clicks or seems weak.
• Visible corrosion, fraying or outer sleeve damage on the original cable.
• Cable has been reused many times or under-maintained.
• During restoration of a classic Porsche 356 where original hardware is aged or absent.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
69542406000
69542406000
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 356C 1963-65
Price: €158.34 inc. VAT
Due In 7 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
95142407
Product Information
These original Porsche cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
The product you are viewing cross references to these numbers
Product Information
Replacement handbrake cable - short or long version.These original Porsche cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
95142407102
95142407202
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Select Below
Prices from: €71.10 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
95142407
Product Information
These cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines. Built to OE specifications, they provide precise fit and long-lasting reliability.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
The product you are viewing cross references to these numbers
Product Information
Replacement handbrake cable - short or long version.These cables pull the rear brakes when you lift the handbrake lever, helping hold the car stationary on inclines. Built to OE specifications, they provide precise fit and long-lasting reliability.
Fits:
Porsche 924S 1986 - 1988
Porsche 944 1985 - 1991
Porsche 968 1992 - 1995
Two Types:
• Short - 95142407102 - Shorter length - Inner or shorter run in the handbrake linkage assembly
• Long - 95142407202 - Longer length - Outer section or longer run of the cable, especially to reach from lever to other components
Diagram Ref No 19 (short) or 20 (long)
The handbrake cable connects the lever your hand pulls to the mechanism in the rear brakes. When you pull the lever, force is transferred via this cable to the brake shoes or calipers to lock the rear wheels. They must maintain tension, flex properly, and resist abrasion, corrosion, and stretching to work reliably.
Why Replacement Matters:
• Over time, handbrake cables can stretch, corrode, bind, or become damaged.
• A weakened or slack cable reduces braking force, may not hold the car on an incline, or require excessive lever travel.
• A cable that binds or is corroded may fail under load, compromising the parking brake’s safety.
• Proper replacement restores reliable function, ensures safety, and helps the car stay stationary when parked on slopes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95142407
95142407102
95142407202
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Select Below
Prices from: €37.02 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
