Camshaft sprocket. Porsche 911 1965-98 - 90110554604
Porsche
90110554604
Product Information
The Genuine Porsche 90110554604 Camshaft Timing Gear is the factory drive sprocket that transfers motion from the timing chain to the camshaft on classic air-cooled engines. Precision-cut teeth and OEM-spec indexing ensure accurate valve timing, quiet chain operation, and long service life.
Fits: Left or Right, Sold each.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998
Diagram ref no 22.
Where it fits / what it does
• Location: Camshaft nose, inside the timing chain housing
• Function: Meshes with the timing chain to drive the camshaft at precise phase relative to the crankshaft
Why & when to replace:
• Tooth wear or pitting, chain elongation damage, or abnormal noise
• During timing chain, tensioner, or full top-end rebuilds
• To restore correct cam timing after diagnosing erratic valve events or metal debris in the housing
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110554604
The product you are viewing cross references to these numbers
Product Information
Camshaft timing gear / Drive sprocket.The Genuine Porsche 90110554604 Camshaft Timing Gear is the factory drive sprocket that transfers motion from the timing chain to the camshaft on classic air-cooled engines. Precision-cut teeth and OEM-spec indexing ensure accurate valve timing, quiet chain operation, and long service life.
Fits: Left or Right, Sold each.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998
Diagram ref no 22.
Where it fits / what it does
• Location: Camshaft nose, inside the timing chain housing
• Function: Meshes with the timing chain to drive the camshaft at precise phase relative to the crankshaft
Why & when to replace:
• Tooth wear or pitting, chain elongation damage, or abnormal noise
• During timing chain, tensioner, or full top-end rebuilds
• To restore correct cam timing after diagnosing erratic valve events or metal debris in the housing
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110554604
90110554602
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Price: €92.03 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Related products
90110505500
Product Information
Fits:
Porsche 911 1965-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110505500
The product you are viewing cross references to these numbers
Product Information
Camshaft chain sprocket. Fits:
Porsche 911 1965-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 6.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110505500
90110505500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €123.49 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90110554604/1
Product Information
This camshaft timing gear is a direct-fit replacement for the factory Porsche drive gear, it ensures accurate chain engagement, quiet operation, and long-term reliability.
Fits: Left or Right, Sold each.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998
Diagram ref no 22.
This sprocket (gear) is part of the timing / camshaft drive system, engaging with the timing chain (or drive chain) to convert crankshaft rotational motion into synchronized camshaft motion. It ensures that the camshafts open and close valves at the correct moments relative to piston position, essential for proper combustion, engine efficiency, and emissions. Accurate tooth profile, hardness, and alignment are crucial—improperly manufactured or worn sprockets can lead to timing drift, noise, chain jump, or catastrophic engine damage.
Original stock / old timing gears can wear, fatigue, or lose tooth integrity over time — especially under heat cycles and chain load. A worn or mismatched sprocket may cause timing chain noise (ticking, rattle), timing drift, or—worst case—chain jump or engine damage. An new replacement restores correct tooth geometry, material hardness, and precision alignment, ensuring the timing system operates smoothly and reliably.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110554604
The product you are viewing cross references to these numbers
Product Information
Camshaft timing gear / Drive sprocket.This camshaft timing gear is a direct-fit replacement for the factory Porsche drive gear, it ensures accurate chain engagement, quiet operation, and long-term reliability.
Fits: Left or Right, Sold each.
Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998
Diagram ref no 22.
This sprocket (gear) is part of the timing / camshaft drive system, engaging with the timing chain (or drive chain) to convert crankshaft rotational motion into synchronized camshaft motion. It ensures that the camshafts open and close valves at the correct moments relative to piston position, essential for proper combustion, engine efficiency, and emissions. Accurate tooth profile, hardness, and alignment are crucial—improperly manufactured or worn sprockets can lead to timing drift, noise, chain jump, or catastrophic engine damage.
Original stock / old timing gears can wear, fatigue, or lose tooth integrity over time — especially under heat cycles and chain load. A worn or mismatched sprocket may cause timing chain noise (ticking, rattle), timing drift, or—worst case—chain jump or engine damage. An new replacement restores correct tooth geometry, material hardness, and precision alignment, ensuring the timing system operates smoothly and reliably.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110554604
90110554604
90110554602
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Price: €64.35 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90110558302
Product Information
Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110558302
The product you are viewing cross references to these numbers
Product Information
Camshaft sprocket flange. Fits Left or Right Camshaft. Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 36
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110558302
90110558300
90110558301
90110558302
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 914 (1970-1976)
Price: €118.95 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
