Introduzca aquí su número de identificación fiscal (NIF o VAT number) y haga clic en Verificar:
No necesita incluir el código de país de su NIF, dado que ya lo ha indicado antes en su dirección de facturación.
Se han verificado sus datos. NIF registrado a nombre de:
###NUEVO MÉJICO###,
.
Su pedido cuenta ahora con una tasa cero a efectos de IVA. Nos reservamos el derecho a verificar estos datos después de que haya solicitado su pedido y a restablecer el IVA si fuese necesario.
Sus datos de identificación fiscal no han sido reconocidos o no son válidos. Su NIF debe coincidir con el país de facturación que especificó anteriormente. Actualmente se ha especificado como . No necesita incluir el código de país de su NIF, do que ya lo ha indicado antes en los datos de su dirección de facturación.
El servicio de verificación de NIF no está disponible en este momento. Le rogamos que indique sus datos del NIF en los comentarios e en el cuadro de instrucciones especiales que encontrará abajo y le aplicaremos un descuento en el IVA tras realizar su solicitud de pedido.
It’s a suspension rubber mount that fits around the anti-roll bar to secure it to the rear axle and help control chassis movement.
SET OF 2. Two bushings (left and right) are typically required per vehicle.
Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L 1997 - 2005 Cars with Sport Suspension - Please choose by size
Porsche 987.1 Boxster 2005 - 2008 Cars with Sport Suspension
Porsche 996 C2 / C4 / C4S 1998 - 2005 *Cars with Sport Suspension - Please choose by size
Porsche 997.1 C2 / C2S / C4 / C4S 2005 - 2008 - Please choose by size
Diagram Ref No 2.
• Application: Rear anti-roll (stabilizer) bar bushing - fits around the 19.8 mm diameter stabilizer bar to mount it to the rear suspension subframe. Two bushings (left and right) are typically required per vehicle.
The anti-roll bar bushing cushions and secures the stabilizer bar to the rear suspension structure. This part helps maintain the correct position and movement control of the rear anti-roll bar, reducing unwanted body roll in corners and stabilizing the chassis during acceleration, braking, and steering.
Over time, the factory rubber in anti-roll bar bushings can harden, crack, or break down due to heat, age, and load cycles. Worn bushings can lead to:
• Increased body roll and reduced handling precision
• Clunking or knocking noises from the rear suspension
• Uneven tire wear
• Loose or sloppy cornering response
Replacing bushings restores correct fitment and suspension geometry, improving stability, road feel, and overall driving confidence. Spyder Performance
Replace the rear anti-roll bar bushings if you notice:
• Clunking or rattling from the rear suspension
• Excessive body lean when cornering
• Visible cracks, distortion, or missing rubber on existing bushings
• During suspension overhaul or anti-roll bar removal
• Elevated noise or vibration through the rear of the car
Números de referencia relacionados
Números relacionados, reemplazados, de referencia cruzada o alternativos para comparación.
99633379225
El producto que está viendo hace referencia cruzada a estos números
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08



