Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Total
Total for Porsche
Total lubricants for Porsche models from Design911, helping match Porsche-approved specifications for engine, gearbox, and other critical systems.
A Quick Look at Total
Total information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Total is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons people replace these products include routine servicing, keeping to Porsche specifications, and tailoring oil choice to driving style (for example frequent short trips or higher-load driving).
- Common symptoms that lead owners to review oil and lubricant choice include increased consumption, noisy start-up, poor cold performance, and leaks that are sometimes wrongly blamed on the oil instead of existing wear.
- Practical tips include always following Porsche approvals and viscosity requirements, avoiding excessive mixing of different oils, and pairing quality lubricants with good filters and sensible service intervals for your usage.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Cooling — Cooling parts are replaced when there are leaks, overheating, repeated low coolant warnings, or ageing hoses and clamps, with early signs such as sweet smells, puddles, steam, or a rising temperature gauge on your Porsche.
- Check coolant level regularly, look for staining or dampness around joints, and do not drive the car if it is overheating, as this can quickly cause serious engine damage.
- Use a proper pressure test (and UV dye if needed) to pinpoint small leaks rather than guessing at components.
Engine Oil — Engine oil is changed to maintain protection, temperature stability, and correct pressure, especially where there is higher mileage, start-up noise, or harder use that accelerates oil degradation.
- Monitor oil consumption and hot idle oil pressure, and investigate leaks promptly if the level drops between services.
- Choosing the correct specification and viscosity for your Porsche and driving profile usually matters more than the brand name alone.
Gearbox / Transmission — Gearbox and transmission parts are replaced when there are shifting issues, noise, or leaks, or during drivetrain refreshes and upgrades on Porsche models.
- Before assuming the gearbox itself has failed, check clutch operation, mounts, linkage, and the condition and level of the transmission oil.
- On a noisy or unhappy transmission, changing to the correct fresh oil is often a sensible first diagnostic step, but continued driving with clear symptoms can be risky.
Service Parts — Service parts are replaced as routine maintenance to keep your Porsche reliable, efficient, and protected, particularly as cars age and neglected servicing can quickly lead to more expensive issues.
- Follow model-specific service intervals, or shorten them if the car is used mainly for short journeys or hard driving.
- Keeping a detailed service log helps future diagnostics and supports the car’s history and resale appeal.
Engine Oil & Lubricants - Total — This category focuses on Total engine oils and lubricants that are formulated to meet demanding Porsche engine requirements, supporting stable oil pressure, thermal stability, and wear protection.
- Specification and viscosity are more important than the brand name—always match Porsche approvals and engine requirements before selecting a product.
- Oil choice will not repair worn seals, but correct, high-quality oil changed at sensible intervals helps limit wear, deposits, and lubrication-related warnings.
Explore Total at Design911
View the current Total range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
This oil is Porsche C30 approved

1 Litre Bottle
Ensures optimal functioning of three-way catalytic converters and particulate filters, which lower emissions of NOx, CO2, CO and particles and ensure compliance with performance levels announced by manufacturers and Euro V environmental standards.
Extends the service life of post-treatment systems by preventing DPFs and three-way catalytic converters from clogging and filling.
Excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance level under all circumstances.
Satisfies the most demanding manufacturer service plans by permitting extra-long oil change intervals.
Approved :
PORSCHE : Porsche C30
BMW : BMW LL-04
DAIMLER : MB-Approval 229.51
VAG : VW 504.00 ,VW 507.00
The new generation of Low SAPS engine oil specially formulated to meet the technical requirements of Volkswagen group vehicles.
Its very high-tech performance optimises the way in which anti-pollution systems - such as Particulate Filters - operate.
Motor oil suitable for all gasoline and Diesel engines, including the most recent, which comply with Euro V polluting emissions reduction norms in particular. This engine oil optimises anti-pollution systems, Particulate Filters (PF) in particular.
Dedicated for the most severe conditions of use (sports driving, repeated start-ups, city and motorway driving).
International classifications:
ACEA : ACEA C3
API : API CF ,API SN
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
213818
The product you are viewing cross references to these numbers
This oil is Porsche A40 approved.

1 Litre Bottle
Ensures optimal functioning of three-way catalytic converters and particulate filters, which lower emissions of NOx, CO2, CO and particles and ensure compliance with performance levels announced by manufacturers and Euro V environmental standards.
This oil extends the service life of post-treatment systems.
Excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance level under all circumstances.
Delivers unsurpassed levels of protection across a variety of driving speeds.
Approved :
PORSCHE : Porsche A40
BMW : BMW LL-01
DAIMLER : MB-Approval 229.5
VAG : VW 502.00 ,VW 505.00
Synthetic technology engine oil that meets the requirements of the new ACEA A3/B4 and API SN/CF sequences.
It meets the most recent requirements for petrol engines.
Premium choice engine oil meets the requirements of a very wide range of engines developed by many different manufacters include Mercedes-Benz, Smart, Porsche, BMW, Mini, Volkswagen, Audi, Seat and Skoda.
Suitable for normal as well as the most demanding driving conditions and for all seasons.
International classifications:
ACEA : ACEA A3/B4
API : API CF ,API SN
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
213789
The product you are viewing cross references to these numbers
This oil is Porsche A40 approved.

5 Litre Bottle
Recommended for all types of modern vehicles, especially high-performance turbo-charged engines
Extremely high level of engine protection, ensuring that all engine parts last for a long time. Protection is greater than 20% at the official European manufacturers' wear tests.
Protection for petrol engine pollution-control systems: optimises the way in which three-way catalytic converters work, preventing them from getting clogged up with deposits.
Reduces emissions of NOx, HC and CO in particular.
Engine cleanliness: offers the best possible protection against deposits as soon as the engine is started, during cold starts and at extremely high temperatures.
Engine start-ups easier - at both very low and very high temperatures (ideal for stop&start systems, for example).
Its resistance to lubricant ageing is 35% higher than official requirements after oxidation test.
Approved :
PORSCHE : Porsche A40
BMW : BMW LL-01
DAIMLER : MB-Approval 229.5
FORD : WSS-M2C 937-A
VAG : VW 502.00 ,VW 505.00
ASTON MARTIN : ASTON MARTIN
Synthetic technology engine oil that meets the requirements of the new ACEA A3/B4 and API SN/CF sequences.
It meets the most recent requirements for petrol engines, as well as those for diesel engines that are not fitted with particulate filters.
Premium choice engine oil meets the requirements of a very wide range of engines developed by many different manufacters include Mercedes-Benz, Smart, Porsche, BMW, Mini, Volkswagen, Audi, Seat and Skoda.
Suitable for normal as well as the most demanding driving conditions and for all seasons.
International classifications:
ACEA : ACEA A3/B4
API : API CF ,API SN
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
213989
The product you are viewing cross references to these numbers
TRAXIUM AXLE 7 80W-90 is extreme pressure mineral oil for the lubrication of highly loaded gears (axles, final drives, transfer cases, planetary gearboxes) when an API GL-5 level of performance is required.
TRAXIUM AXLE 7 80W-90 is specially recommended for ZF and MAN hypoid gears, with standard drain intervals
PERFORMANCES AND CUSTOMER BENEFITS:• Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties
• High compatibility with oil filters due to antifoam properties.
• Efficient stability in operation due to high viscosity index.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
214086
The product you are viewing cross references to these numbers

A high performance synthetic transmission fluid developed for synchronized or non-synchronized manual gearboxes, axles and reduction gears.
Very high viscosity index.
Increased extreme pressure and antiwear properties for an optimized lubrication of hypoid and non hypoid axles.
International classifications:
API : API GL-4 ,API GL-5 ,API MT-1
SAE : SAE J2360
US MIL LUBRICANT : MIL-L 2105 D;Approved ,MIL-PRF 2105 E;Approved
Approved by:
DAIMLER : MB-Approval 235.8
MAN : MAN 341 type Z-2 ,MAN 342 type S-1
SCANIA : SCANIA STO 1:0
VOLVO TRUCKS : Volvo 97312
ZF : ZF TE-ML 02B ,ZF TE-ML 05A ,ZF TE-ML 12L ,ZF TE-ML 12N ,ZF TE-ML 16F ,ZF TE-ML 17B ,ZF TE-ML 19C ,ZF TE-ML 21A
MERITOR : Meritor 076-N
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
214145
The product you are viewing cross references to these numbers
Automatic Gearbox Oil for 996 cars 2002 >> onwards ( Not for PDK gearbox)

Transmission fluid recommended for all automatic transmissions and hydraulic systems when the manufacturer requires an Automatic Transmission Fluid (ATF) GM DEXRON III.
Also recommended for couplers and convertors, power-assisted steering systems.
Outstanding thermal stability in operation thanks to its high antioxidant and detergent level.
Excellent friction properties giving controlled slip for friction components: gear shifting quality, demands smooth clutching action without excessive slip.
High antiwear, anticorrosion and antifoam performances.
Very high viscosity index.
Low temperature fluidity to avoid surge or sudden overload of circuits when starting in very cold weather.
Precise and smooth automatic shifting even at very low speed.
Meets requirements of:
GM : GM DEXRON® III-G ,GM DEXRON® III-H
FORD : MERCON®
Approvals:
DAIMLER : MB-Approval 236.9
MAN : MAN 339 type V-1 ,MAN 339 type Z-1 ,MAN 339 type L-1
VOITH : VOITH H55.6335.xx
VOLVO TRUCKS : Volvo 97341
ZF : ZF TE-ML 04D ,ZF TE-ML 11B ,ZF TE-ML 14A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
213757
The product you are viewing cross references to these numbers
This oil is Porsche C30 approved

5 Litre Bottle
Ensures optimal functioning of three-way catalytic converters and particulate filters, which lower emissions of NOx, CO2, CO and particles and ensure compliance with performance levels announced by manufacturers and Euro V environmental standards.
Extends the service life of post-treatment systems by preventing DPFs and three-way catalytic converters from clogging and filling.
Excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance level under all circumstances.
Satisfies the most demanding manufacturer service plans by permitting extra-long oil change intervals.
Approved :
PORSCHE : Porsche C30
BMW : BMW LL-04
DAIMLER : MB-Approval 229.51
VAG : VW 504.00 ,VW 507.00
The new generation of Low SAPS engine oil specially formulated to meet the technical requirements of Volkswagen group vehicles.
Its very high-tech performance optimises the way in which anti-pollution systems - such as Particulate Filters - operate.
Motor oil suitable for all gasoline and Diesel engines, including the most recent, which comply with Euro V polluting emissions reduction norms in particular. This engine oil optimises anti-pollution systems, Particulate Filters (PF) in particular.
Dedicated for the most severe conditions of use (sports driving, repeated start-ups, city and motorway driving).
International classifications:
ACEA : ACEA C3
API : API CF ,API SN
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
213819
The product you are viewing cross references to these numbers
This oil is Porsche A40 approved.

5 Litre Bottle
Ensures optimal functioning of three-way catalytic converters and particulate filters, which lower emissions of NOx, CO2, CO and particles and ensure compliance with performance levels announced by manufacturers and Euro V environmental standards.
This oil extends the service life of post-treatment systems.
Excellent resistance to temperature variations guarantees the longevity of engine parts and optimal performance level under all circumstances.
Delivers unsurpassed levels of protection across a variety of driving speeds.
Approved :
PORSCHE : Porsche A40
BMW : BMW LL-01
DAIMLER : MB-Approval 229.5
VAG : VW 502.00 ,VW 505.00
Synthetic technology engine oil that meets the requirements of the new ACEA A3/B4 and API SN/CF sequences.
It meets the most recent requirements for petrol engines.
Premium choice engine oil meets the requirements of a very wide range of engines developed by many different manufacters include Mercedes-Benz, Smart, Porsche, BMW, Mini, Volkswagen, Audi, Seat and Skoda.
Suitable for normal as well as the most demanding driving conditions and for all seasons.
International classifications:
ACEA : ACEA A3/B4
API : API CF ,API SN
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
213790
The product you are viewing cross references to these numbers
This oil is Porsche A40 approved.

1 Litre Bottle
Recommended for all types of modern vehicles, especially high-performance turbo-charged engines
Extremely high level of engine protection, ensuring that all engine parts last for a long time. Protection is greater than 20% at the official European manufacturers' wear tests.
Protection for petrol engine pollution-control systems: optimises the way in which three-way catalytic converters work, preventing them from getting clogged up with deposits.
Reduces emissions of NOx, HC and CO in particular.
Engine cleanliness: offers the best possible protection against deposits as soon as the engine is started, during cold starts and at extremely high temperatures.
Engine start-ups easier - at both very low and very high temperatures (ideal for stop&start systems, for example).
Its resistance to lubricant ageing is 35% higher than official requirements after oxidation test.
Approved :
PORSCHE : Porsche A40
BMW : BMW LL-01
DAIMLER : MB-Approval 229.5
FORD : WSS-M2C 937-A
VAG : VW 502.00 ,VW 505.00
ASTON MARTIN : ASTON MARTIN
Synthetic technology engine oil that meets the requirements of the new ACEA A3/B4 and API SN/CF sequences.
It meets the most recent requirements for petrol engines, as well as those for diesel engines that are not fitted with particulate filters.
Premium choice engine oil meets the requirements of a very wide range of engines developed by many different manufacters include Mercedes-Benz, Smart, Porsche, BMW, Mini, Volkswagen, Audi, Seat and Skoda.
Suitable for normal as well as the most demanding driving conditions and for all seasons.
International classifications:
ACEA : ACEA A3/B4
API : API CF ,API SN
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
213988
The product you are viewing cross references to these numbers