Stomski Racing

Valve lash adjuster fixture for Porsche 911



The established method of setting valve lash with a feeler gauge often provides for a "close enough" result and rarely provides for accurate, consistent, and easy to obtain precision. STOMSKI RACING's new version of an old-standby takes the "feel" out of setting valves and provides absolute precision, speed, ease of use, and consistency. By conveniently mounting a travel indicator over the adjuster of the rocker arm, STOMSKI RACING's 911 Valve Lash Adjuster allows you to quickly and accurately set and confirm the actual valve lash without settling for "close enough" or wondering whether your feel is consistent while trying to contort a feeler gauge into the far reaches of the 911 engine.

The SR097 is precision machined from 6061 aluminum and anodized for years of service on all 911 engines including 964s and 993s. Also available are a range of dial indicators including metric, digital, and compact travel indicators for use in restricted areas (pictured).

PLEASE NOTE:  this tool does not come with the gauge

Timing chain strap / support for Porsche 911



When assembling the case halves on the 911 engine STOMSKI RACING's SR222 Timing Chain Strap will prove instrumental in supporting the chain to allow easier mating of the halves. Proper length, radius bend, tension, and quality steel insure that this tool will provide reliable and consistent support for all your engine builds.

Fits
• SR222 for all 911 engines

Timing chain starp / support for Porsche 911

When assembling the case halves on the 911 engine STOMSKI RACING's SR222-GT3 Timing Chain Strap will prove instrumental in supporting the chain to allow easier mating of the halves. Proper length, radius bend, tension, and quality steel insure that this tool will provide reliable and consistent support for all your engine builds.

fits
• SR222-GT3 for the 996/997 GT2, GT3, and TT engines.

Sprocket alignment tool for Porsche 911



Sprocket alignment on the 911 engine requires an accurate and repeatable ability to measure the offset of the sprockets and lay shaft. Simply using a straight edge and vernier calipers requires at least three hands and rarely produces precise measurements. Now, with the SR008, measuring sprocket alignment on the 911 engine has never been simpler, more accurate, or more repeatable. A precisely fabricated block of 6061 aluminum secures an oversized Starrett straight edge (included) to enable easy and exact measurements. No more guessing or settling for "close enough."
Includes custom caliper base, as well as thumb screws for mounting on all 911 engines including the 964.

Spark plug hole repair kit for Porsche 911



Stripped spark plug threads in a 911 head usually means one of two things– a compromised repair or an engine drop to do it properly.

Until now.

STOMSKI RACING's new 911 Spark Plug Hole Repair Kit allows you to either accurately chase the threads of the damaged head, or if necessary, effectuate a complete fix by installing a Time-Sert (or Big-Sert). Our new digitally designed and CNC machined jig mounts over two of the valve cover studs, and when locked down with the included thumb screws, allows Time-Sert reamers, chasers, taps, and setters to be precisely aligned by way of the jig's guide tube and custom tap driver– all while the engine is still in the car.

Available in two different versions:

• SR130 for use with the standard M14x1.25 TimeSert Kit, and Inserts (TS4412E & TS44111) and;

• SR130BS for use with Big-Sert M14x1.25 oversized Insert Kit, and Inserts (TS5141E & TS51407).


We also have Time-Sert/Big-Sert 14x1.25 Kits and Inserts available for the complete package.

Piston / case squirter cleaner for Porsche 911



At last an easy way to clean and check the case/piston squirters on 911 cases. Use this precise tool with compressed air and your air gun to force the squirters open and clean them out. This tool seals the galley off at each end and allows the air to be pushed through the squirter orifice. No need to remove/replace squirters or guess whether they are clear.

Anodized aluminum/brass.

Available with or without an air gun.

Oil return tube o-ring installer for Porsche 911



With this high-quality anodized aluminum tool, you will no longer have to worry about slicing the oil return tube O-rings or your fingers when installing these tight fitting seals. Simply insert the flanged end of the SR027 into the oil return tube, and slide the O-ring over the tapered end, sliding smoothly into place. No rips. No tears. No leaks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR027

The product you are viewing cross references to these numbers

Oil cooler tester for Porsche 911

No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR009

The product you are viewing cross references to these numbers

Mechanical chain tensioners, Set of 2 for Porsche 911



Use these specially designed and fabricated mechanical tensioners to set cam timing, or as a bullet-proof alternative to pressure fed or hydraulic tensioners for racing.
CNC machined from 6061 aluminum and anodized for protection, these will become an integral part of your tool box or race engine. Complete with tensioning bolts, locking nuts, and spacers.

Comes in a set of TWO.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SR011

The product you are viewing cross references to these numbers

Head stud height setter for Porsche 911



Precisely set the height of head studs on all the 911 engines using this innovative tool. The Delrin insert protects the engine case from scratches or marring, while the adjustable three-piece anodized aluminium tubular construction provides complete flexibility for all engine setups, tools, and stud combinations.

For all 911s including GT3s.

Exhaust head stud repair kit for Porsche Air-cooled 911's



Never lose sleep again over a bent or broken exhaust stud on a 911 engine. This new tool is a must for every 911 mechanic and will pay for itself the first time you use it. This is a quick and totally accurate tool to repair and replace broken studs without damaging the head, or worse, having to remove the engine. The SR065 fixture indexes off of the exhaust port (by using one of the various sized port bushings included), secures to the opposite stud, and allows you to drill out, tap, and replace the stud dead on, every time. Includes LH drill bits, tap with extension, drill jigs/guides, port bushings, and a sturdy storage case.

Now includes our SR065D drill guide.

Fits ALL of the 911 heads including the 993.

Stomski Racing SR124 Engine case splitter for Porsche 911



No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.

Cylinder hold down nuts, Set of 6 for Porsche 911



These specially designed and fabricated nuts secure the 911 cylinders in place during rebuild. The nuts allow for easy crank rotation and installation of pistons/cylinders without having the cylinders slip out of the case. Precisely fabricated from 2011 aluminum and anodized for years of service. Each nut is complete with a special Delrin insert to protect your cylinders.

Comes in a set of SIX.

Crankshaft holder for Porsche 911



At last an elegant way to hold the 911 crankshaft for inspection, cleaning, disassembly, and rod bolt stretching. The crank rotates smoothly between centres to allow for complete access to all journals. Mounts vertically or horizontally in you bench mounted vice for optimal versatility.

Made from stainless steel and anodized aluminium.

Cam timing indicator fixture (dual) for Porsche 911 / 964 / 993



STOMSKI RACING finally takes the guess work out of timing the 911 engines. No longer do you need to hassle with convoluted setups, indicator contacts slipping off of the valve retainer, or measurements that will not repeat. This fixture indexes off of two cam carrier studs and literally takes only 10 seconds to setup. Once in place, the SR098 consistently and repeatedly holds the dial indicator contact in the same place on the valve retainer- EVERY time.

Includes adapters and extensions for both metric and AGD (inch) indicators.
Anodized aluminum for years of service.

For all 911s including the 993.

Please note: Gauges sold separately.

3/16-8mm Drill guide for Porsche 911



This stainless steel drill guide will be of great assistance when using our SR065 kit to attempt a stud repair on a 911 head where both studs have snapped. Basically a 3/16 drill guide, one end of the SR065D is opened to 8mm to center the guide over the broken stud, allowing the 3/16 drill to then naturally find the center of the broken stud.

This guide helps take some of the unpredictability out of a double stud repair when even as little as 1 or 2 mm of a stud is protruding from the head.