Retro Trim

Upgrade your old, worn shifter assembly with this meticulously handcrafted, high-quality aluminum gear knob and leather gaiter/shift boot, finished with a sleek satin anodisation. Available in a variety of colors.

Fits:
Porsche 993 Carrera 1994-98
Porsche 993 Turbo 1995-98


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

GK993TEQ

The product you are viewing cross references to these numbers

Rear quarter panel capping in vinyl or leather. SET OF 2



Fits:
Porsche 911 1967-68 TARGA LHD and RHD Cars

Pair of Rear quarter panel caps (mouldings) to fit on top of the rear quarter panels for Porsche 911 Targa "Soft Window" SWB models, 1967-1968. Available in vinyl and leather.


Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155509X40

The product you are viewing cross references to these numbers

Rear quarter panel kit for Porsche 911 Targa from 1967–1973.

Available in Black Porsche Nappa leather or Porsche classic vynil. Comes as ready-to-install panels.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507T

The product you are viewing cross references to these numbers

Rear quarter panel kit for Porsche 911 Coupe from 1965–1973.

Available in Black Porsche Nappa leather or Porsche classic vynil. Can be ordered as a retrim kit for you to restore your existing panels or as ready-to-install pieces.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black and selected colours only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

The retrim kit contains fully trimmed flat panels and material to retrim your existing plastic scoops over the wheel arch. We can also offer the rear quater panels ready-to-install. In this case the flat panels and scoops are fully trimmed and assembled.

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Complete ready-to-install rear quarter panels for Porsche 911 Targa from 1974–1993.

Available forTarga models in Porsche Nappa leather or Porsche classic vinyl, with or without pleated sections.

Our rear quarter panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear quarter panels in Black and selected colours only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete, new original cabriolet boot cover for Porsche 911 cabriolet model years 1983 and 1984 without TENAX fasteners.

This is a gorgeous, OEM specification Porsche part available in several colours with the original bag.

This cabriolet boot cover is probably the best you can buy for completeness, originality and fit. It is identical to the Porsche product in every respect. We use the original German materials; top grade "Sonnenland Classic" canvas and colour coded edge-binding canvas both from the original supplier, high resistance yarns and all necessary precision fasteners and fittings. Even the heavy gauge vinyl and "Velcro" used for the manufacturing the bag exactly match Stuttgart factory specifications. All materials are precision cut, pressure glued, form-stitched and edge bound to guarantee a factory authentic fit.

If you currently drive your Porsche without a boot cover, be aware that you may be damaging your convertible top. These cars were factory delivered with the boot cover to ensure the webbing structure inside the convertible top is protected under high speed, top-down driving. Furthermore, nothing beats the boot cover to accentuate the sex appeal of your curvaceous cabriolet.

To ensure that our boot cover will fit perfectly on both original and replaced soft tops, fasteners are delivered with the cover but not pre-installed.

Delivery Time is Normally 14 - 21 working days on this product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91183840

The product you are viewing cross references to these numbers

Floor mat set black. Porsche 911 1969-73 Targa



Fits:
for RHD cars (right hand drive)
Porsche 911 Targa 1969-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911069P0099

The product you are viewing cross references to these numbers

Floor mat set black. Porsche 911 1969-73 Coupe



Fits:
for RHD cars (right hand drive)
Porsche 911 Coupe 1969-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911069P0098

The product you are viewing cross references to these numbers

Floor mat set, black. Porsche 911 1989 Speedster (No A/C)



Fits:
for RHD cars (right hand drive)
Porsche 911 Speedster 1989
Cars without A/C

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911069P0154

The product you are viewing cross references to these numbers

Floor mat set, black. Porsche 911 1977-89 Targa / Cabrio (With A/C)
RHD cars



Fits:
for RHD cars (right hand drive)
Porsche 911 Targa / Cabrio 08/1976-07/1989
Cars with A/C

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911069P0155

The product you are viewing cross references to these numbers

Floor mat set, black. Porsche 911 1977-89 Targa / Cabrio (No A/C)



Fits:
for RHD cars (right hand drive)
Porsche 911 Targa / Cabrio 08/1976-07/1989
Cars without A/C

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911069P0005

The product you are viewing cross references to these numbers

Floor mat set, black. Porsche 911 1977-89 Coupe (With A/C)



Fits:
for RHD (right hand drive)
Porsche 911 Coupe 08/1976-07/1989
Cars with A/C

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911069P0156

The product you are viewing cross references to these numbers

Floor mat set, black. Porsche 911 1977-89 Coupe (No A/C)



Fits:
for RHD cars (right hand drive)
Porsche 911 Coupe 08/1976-07/1989
Cars without A/C

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911069P0008

The product you are viewing cross references to these numbers

Front Seat Bottom Cushion for Comfort Seat
(will not fit Sport seats)



Fits:
Porsche 911 1977-84
Porsche 928 1980-82

Please note: These cushions are not handed and will fit Left or Right side seats.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91152138502

The product you are viewing cross references to these numbers

Door panels (Pair)

Complete ready-to-install door panels for all Porsche 356 Cabriolet models of the A, B and C series 1956–1965, available in Porsche Nappa leather or Porsche classic vinyl with original pleated maps pockets. Not suitable for Convertible D and Roadster models.

Our door panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued and stapled to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the door panels in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Please note that door cap retrims, door panel clips, handles or other panel hardware are not included.

Sold per pair.

Universal for RHD and LHD cars. Requires to be trimmed to size and shape

Retrim strip (approx 135 cm long) for the facings (middle section) of your dashboard in the basket-weave pattern for all Porsche 911 models 1969 - 1973.

The basket-wevae pattern is period correct for '69-'71 models.

Suitable for dashboards with and without radio.