Rennline

Rennline ducktail rear spoiler. 

Fits

Porsche 991.2 - 2016 to 2019

Rennline’s new ducktail spoiler is a great way to give your 991.2 an OEM+ look with a modern spin on the classic Porsche design. Made from high-quality, hand laid carbon fiber using state of the art manufacturing techniques for a factory fit and finish. 

Product Description

• High quality construction, using the latest technologies
• Carbon Fiber version is hand laid with a high gloss UV protectant finish
• CAD designed using 3D scans of the factory decklid
• Modeled after the iconic Porsche ducktail design
• ABS version is easily paintable to color match to body
• Uses pre-installed industrial grade 3M VHB adhesive to install
• OEM fit and finish
• Fits all Coupe, Cabriolet and targa models

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E380

The product you are viewing cross references to these numbers

Rennline Inner rear 1/4 panel garnish rails carbon fibre. - Coupe only

Fits:
Porsche 911 - 1972 to 1989
Coupe only -  Does not fit Targa or Convertible

Product Description

The garnish rails on your 911 are a high-wear item and typically show their age. Our carbon fiber garnish rails for the 911 will hold up to daily driving abuse or will be a conversation piece in your show car. 

Lighter, stronger and dare we say, better looking than the factory piece this subtle upgrade is quick and only requires your standard set of hand tools to complete.

• Hand-laid carbon fiber construction
• High gloss finish with UV and heat protection
• Complete carbon fiber replacement for OEM garnish rail
• Installs in place of OEM unit with no adhesive
• OEM fit and finish
• Replaces factory part numbers - 91155509100 / 9115550920

Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I138

The product you are viewing cross references to these numbers

Rennline door mirror covers carbon fibre. 



Fits:
Porsche 911 - 1974 to 1989 (G-Body)

Product Description

Rennline's carbon fiber mirror shells are a great way to give your Porsche a subtle yet modern exterior upgrade. 

Made from high-quality carbon fiber using the latest technology, our mirror shells are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. These install in minutes reusing the factory hardware.

• Made from high-quality carbon fiber using the latest manufacturing technologies
• Designed from the OEM mirrors for a factory fit and finish
• Highly durable and resists common wear & tear
• Reuses OEM hardware
• Installs in minutes using basic hand tools

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E371

The product you are viewing cross references to these numbers

Rennline door mirror covers carbon fibre. 



Fits:
Porsche 95B.1 Macan - 2014 to 2018
Porsche 95B.2 Macan - 2019 to 2021

Product Description

Rennline's carbon fiber mirror shells are a great way to give your Porsche a subtle yet modern exterior upgrade. 

Made from high-quality carbon fiber using the latest technology, our mirror shells are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. These install in minutes reusing the factory hardware.

• Made from high-quality carbon fiber using the latest manufacturing technologies
• Designed from the OEM mirrors for a factory fit and finish
• Highly durable and resists common wear & tear
• Reuses OEM hardware
• Installs in minutes using basic hand tools

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E361

The product you are viewing cross references to these numbers

Rennline door mirror covers carbon fibre. 



Fits:
Porsche 957 Cayenne - 2007 to 2010

Product Description

Rennline's carbon fiber mirror shells are a great way to give your Porsche a subtle yet modern exterior upgrade. 

Made from high-quality carbon fiber using the latest technology, our mirror shells are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. 

Take your old plastic pieces out and install ours in their place. These install in minutes reusing the factory hardware.

• Made from high-quality carbon fiber using the latest manufacturing technologies
• Designed from the OEM mirrors for a factory fit and finish
• Highly durable and resists common wear & tear
• Reuses OEM hardware
• Installs in minutes using basic hand tools

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E372

The product you are viewing cross references to these numbers

Rennline Sport Design spoiler, Carbon Fibre.



Fits:
Porsche 991.2 C2/C2S/C4/C4S Coupe or Cabrio

Rennline’s new carbon fibre OEM style GTS spoiler is a great way to give your 991.2 an OEM+ look and a modern upgrade. Made from high-quality carbon fiber using the latest technology for a factory fit and finish while adding a bit of style. Installation is a breeze, pop your OEM covers off and snap on your new carbon fibre parts!

•  High-quality carbon fibre construction
•  Paintable carbon fibre, or ready-to-install as is
•  High gloss finish with UV and heat protection
•  Designed from a factory GTS spoiler
•  Installs like factory spoilers with no adhesive
•  OEM fit and finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E379

The product you are viewing cross references to these numbers

Rennline aerokit front lip spoiler carbon fibre. 



Fits:
Porsche 997.1 - 2005 to 2008

Porsche 997 GT3 - 2007 to 2008
Porsche 997 GT2 - 2008 to 2008

Product Description

Rennline's carbon fiber front lip is a great way to give your 997 an eye-catching OEM+ upgrade. This carbon front lip was 3D scanned, designed, and prototyped in house right here in Vermont. Made from hand-laid carbon fiber using the latest manufacturing technologies, our front lip will add a completely bespoke feel to your 997.

• Hand-laid carbon fiber construction
• High gloss finish with UV and heat protection
• Designed from the ground up using state of the art 3D scanning technology
• OEM fit and finish
• Replaces OEM P/N# 99750598300

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E384

The product you are viewing cross references to these numbers

Rennline engine lid spoiler carbon fibre. 

Fits:
Porsche 996 Carrera 2 / Carrera 4 - 1997 to 2005
Porsche 996 C4S - 2001 to 2005

Product Description

Rennline’s new ducktail spoiler is a great way to give your 996 an OEM+ look with a modern spin on the classic Porsche design. Made from high-quality hand laid carbon fiber or ABS plastic using state of the art manufacturing techniques for a factory fit and finish.

• High quality construction, using the latest technologies
• Carbon Fiber is hand laid with a high gloss UV protectant finish
• or ABS plastic
• CAD designed using 3D scans of the factory decklid
• Uses pre-installed industrial grade 3M VHB adhesive to install
• OEM fit and finish

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E359

The product you are viewing cross references to these numbers

Rennline gear shift cable retaining bracket set, gearbox end. 



Fits:
Porsche 986 Boxster - 1997 to 2004
Porsche 987 Boxster - 2005 to 2012
Porsche 987 Cayman - 2005 to 2012
Porsche 996 - 1997 to 2005
Porsche 997 - 2005 to 2012

Product Description

Is your gear change feeling a little sloppy or maybe your gear cables pop off at the transmission end? 

That’s why we developed these shifter cable retainers. The stock shifter cables tend to wear, which causes slop in the shifter and in the worst cases pop off the transmission during heavy use. This shifter cable retainer will keep your cable ends in place and give you peace of mind that your cables will NEVER pop off again. 

Our goal is to offer a cost effective repair to save your expensive cables and offer a safety element to your Porsche.

Rennline billet shift rod carrier and bushing. 



Fits:
Porsche 911 - 1965 to 1986
Porsche 911 turbo - 1975 to 1988
Porsche 914 (with tail-shift)

Porsche 914/6 - 1970 to 1972

Product Description

If you need help remembering the last time you changed this bushing, chances are it's time. Upgrade your shift bushing carrier while you’re at it, featuring a high-density Delrin bush.

Bracket -

• Stronger over the sheet metal OE one reducing flex and play.
• Tighter tolerance on the bushings to reduce play.
• Works with OE and aftermarket bushings
• Comes with TR16 upgraded bushing preinstalled.
• Easier to install bushings.
• Replaces factory part 93042403101 and 91442422400

Bushings -

• Delrin material for a more direct feeling.
• Extended bushing for more lateral control.
• Works on OE shifter support
• Easy to install
• Lubrication recommended

Click 'Zoom in' for large parts diagram
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TR17

The product you are viewing cross references to these numbers

Rennline 915 gear shift coupling bushings solid. 



Fits:
Porsche 356A / 356B / 356C - 1956 to 1965
Porsche 911 1969 to 1988
Porsche 911 turbo - 1975 to 1988

Product Description

If your 915 shift coupler has never been service or replaced and you're experiencing a loose and worn-out feel in your shifter, the culprit is likely the coupler. 

The factory-installed coupler bushings are constructed from low durometer compliant rubber, which tends to wear out quickly. Our upgraded brass bushing is designed to enhance shifter feedback and deliver precise shifts. It's the solution you've been seeking to optimize the performance of your 915 transmission.

Fits factory shift coupling - 91142402404 and 69542402404

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TR18

The product you are viewing cross references to these numbers

ExactFit Magnetic Phone Mount. Porsche 914 wireless charging with Magsafe



Fits:
Porsche 914 - 1970 to 1976 Dash Mount

Introducing Rennline's ExactFit Magnetic Phone Mounts – the perfect phone mounting solution. No more flimsy mounts or damaging attachments to your vehicle’s interior. Our tailored mounts fit your specific model, installing easily in minutes. Built with durable metal components for long-lasting reliability and an OEM+ appearance.

• Available with a standard magnet or induction charger with MagSafe compatibility
• Only vehicle specific phone mount on the market for European car makes
• Re-uses OEM hardware where applicable (depends on vehicle application)
• 17mm aluminum ball mount (compatible with any accessory that uses same diameter ball)
• Mount bracket constructed of 20-gauge steel and powder coated satin black
• Includes adhesive backed ring for phone or case for use on non MagSafe phones
• MagSafe wireless induction charger capable of max output of 15w (Qi standard)
• USB-USB-C cable included with wireless charging option

ExactFit Magnetic Phone Mount. Porsche Taycan wireless charging with Magsafe



Fits:
Porsche Taycan - 2020 Onwards Centre Console Mount

Introducing Rennline's ExactFit Magnetic Phone Mounts – the perfect phone mounting solution. No more flimsy mounts or damaging attachments to your vehicle’s interior. Our tailored mounts fit your specific model, installing easily in minutes. Built with durable metal components for long-lasting reliability and an OEM+ appearance.

• Available with a standard magnet or induction charger with MagSafe compatibility
• Only vehicle specific phone mount on the market for European car makes
• Re-uses OEM hardware where applicable (depends on vehicle application)
• 17mm aluminum ball mount (compatible with any accessory that uses same diameter ball)
• Mount bracket constructed of 20-gauge steel and powder coated satin black
• Includes adhesive backed ring for phone or case for use on non MagSafe phones
• MagSafe wireless induction charger capable of max output of 15w (Qi standard)
• USB-USB-C cable included with wireless charging option

Mudflaps are a quick and easy way to protect your vehicle's precious paint from rocks and debris. Our kit comes with four mudflaps and all the needed hardware for a quick and simple installation. These mudflaps are tough, made from weather-resistant plastic, and designed specifically for your Cayenne for an OEM fit and finish.

Fits:
Porsche 957 Cayenne 3.6L V6 2007-10
Porsche 957 Cayenne S 4.8L V8 2007-10
Porsche 957 Cayenne Turbo 4.8L V8 2007-10
Porsche 957 Cayenne Diesel 3.0L V6 2009-10

NOTE: This product is incompatible with vehicles equipped with Porsche's Aerokit, as the side skirts include an additional cover. The Aerokit is standard on GTS models and optional on all other variants.

*PR 2D0 - Without Aerokit 
*PR 2D1 - Aerokit, with Sill Cover 
*PR 2D2 - Aerokit, without Sill Cover

Mud flap kit front and rear. 



Fits:
Porsche 971.1 Panamera - 2017 to 2020

Product Description

Mudflaps are a quick and easy way to protect your vehicle's precious paint from rocks and debris. 

Our kit comes with four mudflaps and all the needed hardware for a quick and simple installation. These mudflaps are tough, made from weather-resistant plastic, and designed specifically for your Panamera for an OEM fit and finish.