Rennline

Front Bumper Wire Mesh Grill Kit. 5
5 meshes in this kit for SportDesign bumper.

Fits:
Porsche 991/991S with Sport Design bumper WITH parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 996 GT2

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model, resulting in a perfect fit every time. Other colors available by special order, please contact us for details.

Pictures may not reflect actual application

Rennline Front bumper wire mesh grill kit (Outers). Black
2 piece set - mesh for left and right grill only

Fits:
Porsche 991/991S C2 / C2S (NOT TARGA)
*cars WITHOUT parking sensors

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 996.1 1999-2001

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting, in a perfect fit every time.

Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 996.2 2002-2005
Porsche 996.2 GT3

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit.

Fits:
Porsche 996 C4S / 996 Turbo 01-05

One of Porsche’s biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline’s has a unique clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model, resulting in a perfect fit every time.

Pictures may not reflect actual application.

Note: Other colors available by special order, please contact us for details.

Rennline Fire Extinguisher Mount.

Fits:
Porsche 996 GT3 OEM Race Seat

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. This particular mount is specifically designed for non reclinable Porsche OEM GT3 race seats. It mounts to the top side of the sliders allowing the extinguisher to move with the seat, and is compatible with factory and most after market sub belt brackets. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included.

Note: Pictures may not show actual product.

Rennline Fire Extinguisher Mount.

Fits:
Porsche 997 GT3/GT2 OEM Race Seat

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. This particular mount is specifically designed for non reclinable Porsche OEM GT3 race seats, although it will also work on a drivers side GT2 seat without a sub mount installed.. It mounts to the top side of the sliders allowing the extinguisher to move with the seat, and is compatible with factory and most aftermarket sub belt brackets. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included.

Note: Pictures may not show actual product.

Rennline fire extinguisher mount - approved for Left Hand Drive (LHD)

Fits:
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 997
Porsche 991
Porsche 981 Boxster
Porsche 981 Cayman

PLEASE NOTE
Except Sport Adaptive and Side Mounted Seats.
On 981/991, only full manual seats.
These will not fit race seats, only standard fitted seats.

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike most fire extinguisher mounts available, this Rennline mount installs directly to the factory drivers's seat and does not compromise seat travel or leg room in anyway. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included. Fire extinguisher and fire extinguisher quick disconnect not included, but available below. Available for both power and manual drivers seat. Does not fit sport adaptive seats or side mounted seats
Only works on the driver's side seat.

Note: Pictures may not show actual product.

Rennline Fire Extinguisher Mount. Manual Seats

Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 944
Porsche 928

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike most fire extinguisher mounts available, all of Rennline's mounts install directly to the factory seats and do not compromise seat travel or leg room in anyway. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included. This particular mount fits to manual seats. Fire extinguisher not included.

Note: Pictures may not show actual product.

Rennline Fire Extinguisher Mount. Power Seats

Fits:
Porsche 911 1965-89
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 944
Porsche 928

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike most fire extinguisher mounts available, all of Rennline's mounts install directly to the factory seats and do not compromise seat travel or leg room in anyway. Constructed from aircraft grade aluminum and meets all requirements for racing series or other organized track events. Designed to be used with most standard 2.5lb fire extinguishers, all hardware and installation instructions are included. This particular mount fits to power seats including seats with manual forward/back but power up/down. Fire extinguisher not included.

Note: Pictures may not show actual product.

Rennline Fire Extinguisher Mount.

Fits:
Porsche 996
Porsche 986 Boxster

For use on factory driver or passenger side seats (due to some factory options, this unit may not work on all driver side seats with seat in the lowest position). Fire extinguisher not included.

Note: Pictures may not show actual product.

Rennline Billet Aluminium Valve Cover LOWER.
SET OF 2



Fits:
Porsche 993 TURBO 1995-98

Tired of oil puddles in the driveway? Rennline has the solution with our new billet, fully CNC machined valve covers. These valve covers are a direct bolt on replacement for your flimsy leaking factory covers, and are machined to accept the reusable OEM gaskets (available separately). With the corrosion resistant finish, chamfered edges, and tight gasket fitment, these valve covers are simply the best on the market. Available in Anodized clear or black finishes, or powdercoat red all with or without the fins brushed. Also included are the spark plug wire retainers and retainer hardware for a clean installation.

Note: Red are coated to order, please allow 1 week for red coating.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

M15

The product you are viewing cross references to these numbers

Rennline Billet Aluminium Valve Cover LOWER.
SET OF 2



Fits:
Porsche 993 1995-98 (except Turbo)

Tired of your wife nagging you about the oil puddles in the driveway? Rennline has the solution with our new billet, fully CNC machined valve covers. These valve covers are a direct bolt on replacement for your flimsy leaking factory covers, and are machined to accept the reusable OEM gaskets (available separately). With the corrosion resistant finish, chamfered edges, and tight gasket fitment, these valve covers are simply the best on the market. Available in Anodized clear or black finishes, all with or without the fins brushed. Also included are the spark plug wire retainers and retainer hardware for a clean installation.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

M14

The product you are viewing cross references to these numbers

Rennline Billet Aluminium Valve Cover replaces OE 99310511505 UPPER.
SET OF 2



Fits:
Porsche 993 1995-98
Porsche 993 Turbo

Tired of oil puddles in the driveway? Rennline has the solution with our new billet, fully CNC machined valve covers. These valve covers are a direct bolt on replacement for your flimsy leaking factory covers, and are machined to accept the reusable OEM gaskets (available separately). With the corrosion resistant finish, chamfered edges, and tight gasket fitment, these valve covers are simply the best on the market. Available in Anodized clear or black finishes, or powdercoat red all with or without the fins brushed. Also included are the spark plug wire retainers and retainer hardware for a clean installation.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

M13

The product you are viewing cross references to these numbers

Rennline Aluminium lock / knob set.
DRILLED Bezel



Fits:
Porsche 911 1984-89
Porsche 964 1989-94
Porsche 928 All

This beautiful 4 piece billet aluminium lock/knob set will really dress up that interior of your 911 or 928. They are machined out of aircraft grade aluminium, anodized to a satin finish, and come with all stainless steel hardware. Each kit comes equipped with all components required to transform both driver and passenger side doors.

Note: Pictures may not show actual product.