Rennline

Rennline Fire Extinguisher Mount - Porsche - EZ Adjust.

Fits:
Porsche 911 1974 >>
Porsche 964
Porsche 993
Porsche 996
Porsche 986/987/981 Boxster
Porsche 986/987/981 Cayman
Porsche 997
Porsche 991

Available in 2 colour combinations:
- Black extinguisher mount and black slider
- Silver extinguisher mount and black slider
See the images in gallery for detailed view.

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike any extinguisher mount on the market, this two-piece design allows you to remove all visible components in seconds to revert to a factory look. While other rail mount systems are fixed and limit your seat travel, our EZ-Adjust Slider allows you to make a wide range of seat adjustments on the fly. Installs in minutes and is designed to fit all types of seats, from lightweight manual race seats to the most complex electric seats from Porsche.

• 2-piece design
• Easy-to-remove components
• EZ-Adjust Slider for seat adjustment
• Installs in minutes
• Fits wide variety of seats

Note: Pictures may not show actual product.

Rennline's carbon fibre Heater Block Off Shrouds are a great accessory to tidy up your engine bay after eliminating your heater.



Fan Shroud heater blockoff plates. For sealing the heater ducts on 911 engine 2.0 to 3.0 liter.

Fits:
Porsche 911 2.0L-3.0L

Price per pair

Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2



Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT

If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.

this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.

• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S55

The product you are viewing cross references to these numbers

Rennline Clubsport Camber Plate Top Mount Set.
SET OF 2



Fits:
Porsche 991/981/718 2WD except GT3/GT4

Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.

• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S54

The product you are viewing cross references to these numbers

Rennline Sealed REAR Top Mounts.
SET OF 2

Fits
Porsche 996 C2 3.4L / 3.6L (2 Wheel Drive)
Porsche 997 C2 3.6L / 3.8L (2 Wheel Drive)

Keep optimal rear suspension geometry at the track and during spirited street driving with Rennline Sealed Rear Strut Mounts. Factory bushings are designed to be compliant in an attempt to make the car more marketable, but if you are here you already know they could have created a more performance oriented design. Our strut mounts feature Teflon-lined spherical bearings mounted in precision machined housings to ensure a perfect fit and unbeatable quality. Unlike almost every other unit on the market, Rennline mounts include a dust boot to completely seal the bearing from stones and road grime and make our mounts a cut above the rest.

Will not work with factory suspension setup. For aftermarket coilovers only. Designed for use with conical style spring hats. If you have the cup style, see our conical style below which you will need.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S26

The product you are viewing cross references to these numbers

Rennline Throttle Extension - Heel/Toe for LHD Cars



These throttle extensions are designed to work with Rennline gas pedals (# P70, P71, & P73).

All throttle extension kits now come with both heel and toe extensions that can be used individually or together. Throttle pedal cover is not included with this kit.

Depending on your driving style, this throttle extension kit can be used as a heel, toe, or heel/toe configuration. It's easy to install and can be added to most Rennline gas pedals. Available in red, silver, or black.


Note: Pictures may not show actual product.

If you have any questions as to whether or not this will work with your pedal, please contact us.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PE7071HT

The product you are viewing cross references to these numbers

Front Bumper Wire Mesh Grill Kit for cars WITHOUT 3rd Radiator.

Fits:
Porsche 981 Cayman GTS / 981 Boxster GTS
cars WITHOUT 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.

Front Bumper Wire Mesh Grill Kit For cars WITH 3rd Radiator

Fits:
Porsche 981 Cayman GTS / 981 Boxster GTS
cars WITH 3rd Radiator

Note: Due to the placement of parking sensors this kit will fit cars WITH and WITHOUT parking sensors

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time. Note: Some models use clips, some models use screws and some both.

Pictures may not reflect actual application.

Rennline radio block-off plate.



Fits:
Porsche 911 1985>>
Porsche 964
Porsche 993

Radio and Heater Control block off plates - Until now, removing the center console from your 964/993 was not possible due to the required switches that were mounted in it. Rennline's new radio and heater control block off plates solve that problem. These plates have been specially designed to accept the factory switches installed in the center console of all 964/993 911 85+ cars. Don't have the factory switches? No problem. These plates are also available without switch cutouts so you can install your own switches or gauges. Made from powder coated metal and installs in minutes on cars with the radio or heater controls removed.

Available in 6, 3, and 0 switch configurations.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I21

The product you are viewing cross references to these numbers

Rennline Remote Pull Cable Kit with T- Handle
Works with all Rennline kill switches

Fits:
Porsche 911
Porsche 964
Porsche 993

This item is required by most organized race events. Remote pull kits allow corner worker to easily turn the power off on your car in the case of an emergency. This kit has a T-Handle end that can easily be installed through existing or drilled holes. Kit can also be mounted in dash for easy driver access. Kit Includes 6' red pull cable with handle, power/ off tag, cable end and full installation instructions. Can be used on several different battery disconnect switches.

Note: Pictures may not show actual product.

Rennline adjustable pedal lifter plate for Porsche



Fits:
Porsche 944 / 924 / 968
Porsche 996 / 997 / 991
Porsche 986 / 987 / 981 Boxster
Porsche 987 / 981 Cayman

Can't Heel/Toe? Need more height on your gas pedal? Rennline's adjustable lifter plate will solve the problem. This add on pedal accessory turns your standard Rennline gas pedal cover into a fully adjustable unit. This unique design installs in minutes and allows full height adjustment up to 1 inch. Not only does this lifter plate adjust the height but it also allows you to adjust the pedal angle in both lateral and longitude directions. This feature allows you to set the exact angle required to easily perform heel/toe maneuvers. Best of all, every adjustment is simply made from the 3 mounting screws on the face of the pedal.

Note: This is only the lifter plate assembly, Pedal cover and extensions are not included with this kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PA71

The product you are viewing cross references to these numbers

Rennline Aluminium 4 Piece Pedal Set. Rubber Grip
LHD Cars

Fits:
Porsche 991

Porsche 991.2
Porsche 981 Boxster
Porsche 718 Boxster
Porsche 981 Cayman
Porsche 718 Cayman

Rennline's rubber grip aluminum pedal covers are the ultimate interior upgrade for any performance automobile. No other pedal on the market gives you the flexibility of adding and removing throttle extensions and lifter plates to fine tune your individual ergonomic preference. Rennline has taken this pedal design to the next level by utilizing rubber grips that can easily be replaced if needed. Unlike any other dead pedal on the market, Rennline starts with a thick piece of billet which gets machined and formed into a functional yet aesthetically pleasing part that protects both the factory dead pedal and the carpeting around it. This added material thickness also insures that the rubber grips never fall out. Each pedal set comes with 8 replacement rubber grips or can be purchased separately at any time. Rennline pedal sets are constructed of anodized aircraft grade aluminum with all stainless steel hardware.

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P7160101

The product you are viewing cross references to these numbers

Rubber Bonnet/Boot Hooks. LARGE (Set of 2).

It is the little touches that make a project, so whether you are doing a backdate, replica, restomod or tribute car you want the details to be correct. Complete the front of your car with these RSR Replica Rubber Bonnet Hooks; not only do they look the part but they shave complexity and weight just like the factory versions. A perfect complement for any build, these Bonnet Hooks will make sure when people see you coming they know you have paid attention to every facet of your build.

Front bumper wire mesh grill kit w/ 3rd radiator, Inner & Outer, w/o Parking Sensors.

Fits:
Porsche 981 Cayman / 981 Cayman S
without Parking Sensors
with 3rd Radiator

One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install an intake screen kit. Unlike most kits on the market, Rennline's has a unique screw and clip system that eliminates the need to glue, drill, or use exposed hardware. Every screen is pre-molded for your specific model resulting in a perfect fit every time.

Note: Some models use clips, some models use screws and some both. Both outer grills included.

Pictures may not reflect actual application