OE Match
About OE Match
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.
OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.
93010314715/2
Product Information
This set of 12 bearing shells (6 upper + 6 lower) is manufactured to OEM specifications. These bearing shells maintain proper oil film clearance between the connecting rods and crankshaft journals, ensuring smooth, friction-free rotation under all operating conditions.
Fits:
Porsche 911 - 1984 to 1989
Porsche 911 (930) turbo - 1978 to 1989
Porsche 964 - 1989 to 1994
Diagram Ref No 20.
The OE Match bearing set is ideal for professional engine rebuilds, restorations, or performance refreshes, restoring reliable oil pressure and long-term bottom-end integrity.
• Function: Provides oil film support and crankshaft bearing surface
• Set Contents: 12 bearing shells (6 connecting rods)
• Replacement Interval: At rebuild or low oil pressure diagnosis
• Benefits: Restores oil pressure, eliminates knock, prevents crank damage
• Installation: Direct-fit standard size bearings; verify journal clearance before fitting
Over time, rod bearings wear due to high RPM loads, heat cycles, and oil contamination. Worn bearings can lead to:
• Low oil pressure or flickering oil light
• Knocking or vibration from the crankshaft
• Metal particles in the oil during servicing
Replace bearings:
• During every engine rebuild or crankshaft regrind
• When oil pressure readings drop below specification
• After high-mileage or track use to prevent bottom-end failure
New bearings restore correct oil clearance, stable lubrication, and quiet, balanced engine operation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93010314715
The product you are viewing cross references to these numbers
Product Information
SET OF 12 Big End Conrod Bearing. Standard Size.This set of 12 bearing shells (6 upper + 6 lower) is manufactured to OEM specifications. These bearing shells maintain proper oil film clearance between the connecting rods and crankshaft journals, ensuring smooth, friction-free rotation under all operating conditions.
Fits:
Porsche 911 - 1984 to 1989
Porsche 911 (930) turbo - 1978 to 1989
Porsche 964 - 1989 to 1994
Diagram Ref No 20.
The OE Match bearing set is ideal for professional engine rebuilds, restorations, or performance refreshes, restoring reliable oil pressure and long-term bottom-end integrity.
• Function: Provides oil film support and crankshaft bearing surface
• Set Contents: 12 bearing shells (6 connecting rods)
• Replacement Interval: At rebuild or low oil pressure diagnosis
• Benefits: Restores oil pressure, eliminates knock, prevents crank damage
• Installation: Direct-fit standard size bearings; verify journal clearance before fitting
Over time, rod bearings wear due to high RPM loads, heat cycles, and oil contamination. Worn bearings can lead to:
• Low oil pressure or flickering oil light
• Knocking or vibration from the crankshaft
• Metal particles in the oil during servicing
Replace bearings:
• During every engine rebuild or crankshaft regrind
• When oil pressure readings drop below specification
• After high-mileage or track use to prevent bottom-end failure
New bearings restore correct oil clearance, stable lubrication, and quiet, balanced engine operation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93010314715
93010314715
930.103.147.15
930 103 147 15
93010314715001
93010314700
930.103.147.00
930 103 147 00
93010314701
930.103.147.01
930 103 147 01
93010314701001
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 914 (1970-1976)
Price: €55.10 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
92810314315/2
Product Information
This conrod bearing set is a high-quality replacement for the factory conrod bearings, manufactured to OEM specifications. This 8-piece set (one pair per connecting rod) maintains the correct oil film clearance between the connecting rods and crankshaft journals, ensuring smooth, friction-free rotation under high loads and high speeds.
Fits:
Porsche 924S - 1986 to 1988
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995
Diagram Ref No 8
This is the ideal choice for engine rebuilds, performance refreshes, or preventative maintenance, restoring factory oil pressure, crankshaft alignment, and smooth engine operation.
• Location: Connecting-rod big-end journal to crankshaft interface
• Function: Maintains oil film support for the crankshaft and absorbs combustion loads transferred through the rod assembly
• Set Contents: 8 bearing shells (4 rods / V8 engine)
• Replacement Interval: At rebuild or low oil-pressure diagnosis
• Benefits OEM fit, precise clearances, durable film strength, quiet operation
• Installation: Fit as matched pairs per rod; use assembly lube and torque to spec
Rod bearings endure constant load, heat, and oil pressure, which causes gradual wear or fatigue over time. This can result in low oil pressure, knocking noises, or even engine damage. It’s essential to replace them during an engine rebuild, crankshaft service, or whenever oil analysis shows metal debris or pressure loss. Installing a new set restores precise oil clearance, consistent pressure, and long-term reliability in the engine’s bottom end.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810314315
The product you are viewing cross references to these numbers
Product Information
SET OF 8 - Big End Conrod Bearings. Standard size.This conrod bearing set is a high-quality replacement for the factory conrod bearings, manufactured to OEM specifications. This 8-piece set (one pair per connecting rod) maintains the correct oil film clearance between the connecting rods and crankshaft journals, ensuring smooth, friction-free rotation under high loads and high speeds.
Fits:
Porsche 924S - 1986 to 1988
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995
Diagram Ref No 8
This is the ideal choice for engine rebuilds, performance refreshes, or preventative maintenance, restoring factory oil pressure, crankshaft alignment, and smooth engine operation.
• Location: Connecting-rod big-end journal to crankshaft interface
• Function: Maintains oil film support for the crankshaft and absorbs combustion loads transferred through the rod assembly
• Set Contents: 8 bearing shells (4 rods / V8 engine)
• Replacement Interval: At rebuild or low oil-pressure diagnosis
• Benefits OEM fit, precise clearances, durable film strength, quiet operation
• Installation: Fit as matched pairs per rod; use assembly lube and torque to spec
Rod bearings endure constant load, heat, and oil pressure, which causes gradual wear or fatigue over time. This can result in low oil pressure, knocking noises, or even engine damage. It’s essential to replace them during an engine rebuild, crankshaft service, or whenever oil analysis shows metal debris or pressure loss. Installing a new set restores precise oil clearance, consistent pressure, and long-term reliability in the engine’s bottom end.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810314315
92810314302
92810314315
92810314305002
92810314305
92810314304
92810314300
92810314304001
92810314315001
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Price: €55.10 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
96410190100/2
Product Information
This 14-piece set (12 main bearing shells + 2 thrust bearings) supports the crankshaft along the crankcase, maintaining ideal oil-film clearance, pressure, and alignment throughout the engine’s life. Manufactured to OEM geometry, the set guarantees perfect crush fit, consistent wall thickness, and stable lubrication under the high temperatures and loads typical of Porsche’s flat-six engines.
Fits:
Porsche 911 - 1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 996 turbo - 2000 to 2005
Porsche 996 GT3
Diagram Ref No 22 and 23
Ideal for engine rebuilds, restorations, or preventative maintenance, these bearings restore factory-smooth rotation, stable oil pressure, and long-term bottom-end reliability.
• Function: Supports crankshaft rotation and controls axial movement
• Set Contents: 14 pieces (12 main + 2 thrust bearings)
• Replacement Interval: During engine rebuild or low oil pressure service
• Benefits: OEM fit, precise clearances, stable lubrication, quiet operation
Main bearings gradually wear from heat, oil contamination, and load stress, causing loss of oil pressure, vibration, and potential crank damage.
Replace:
• During any engine rebuild or crankshaft service
• If oil pressure drops or metal in oil is found
• When clearances exceed factory specifications
Replacing with a new 96410190100 set restores correct oil clearance, smooth rotation, and factory reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96410190100
The product you are viewing cross references to these numbers
Product Information
Main Bearing Set - STANDARD. This 14-piece set (12 main bearing shells + 2 thrust bearings) supports the crankshaft along the crankcase, maintaining ideal oil-film clearance, pressure, and alignment throughout the engine’s life. Manufactured to OEM geometry, the set guarantees perfect crush fit, consistent wall thickness, and stable lubrication under the high temperatures and loads typical of Porsche’s flat-six engines.
Fits:
Porsche 911 - 1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 996 turbo - 2000 to 2005
Porsche 996 GT3
Diagram Ref No 22 and 23
Ideal for engine rebuilds, restorations, or preventative maintenance, these bearings restore factory-smooth rotation, stable oil pressure, and long-term bottom-end reliability.
• Function: Supports crankshaft rotation and controls axial movement
• Set Contents: 14 pieces (12 main + 2 thrust bearings)
• Replacement Interval: During engine rebuild or low oil pressure service
• Benefits: OEM fit, precise clearances, stable lubrication, quiet operation
Main bearings gradually wear from heat, oil contamination, and load stress, causing loss of oil pressure, vibration, and potential crank damage.
Replace:
• During any engine rebuild or crankshaft service
• If oil pressure drops or metal in oil is found
• When clearances exceed factory specifications
Replacing with a new 96410190100 set restores correct oil clearance, smooth rotation, and factory reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96410190100
96410190100
93010113101
93010113104
93010113105
93010113202
93010113203
93010190100
93010113115
93010113215
93010113216
96410113801
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
Price: €145.00 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99610113780/2
Product Information
Sold as PAIR / Requires 1 pair per engine
Pair, includes two bearing shells for the intermediate shaft, with one shell having a thrust shoulder. This bearing set is used to control axial play and radial support of the intermediate shaft. These precisely machined shells maintain the correct end-float, allowing accurate cam timing and smooth chain drive function under high RPM loads.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610113780
The product you are viewing cross references to these numbers
Product Information
Bearing shell for intermediate shaft (with shoulder). Sold as PAIR / Requires 1 pair per engine
Pair, includes two bearing shells for the intermediate shaft, with one shell having a thrust shoulder. This bearing set is used to control axial play and radial support of the intermediate shaft. These precisely machined shells maintain the correct end-float, allowing accurate cam timing and smooth chain drive function under high RPM loads.
Fits:
Porsche 911 - 1965 to 1989
Porsche 914/6 - 1970 to 1976
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 996 turbo / GT2 / GT3
Porsche 997.1 turbo / GT2 / GT3
Porsche 997.2 GT2 / GT3
This product supersedes Porsche's old part numbers:
- 91610113700
- 99310113700
- 99310113701
Diagram ref no 29.
These high-quality bearings resist wear, maintain stability under loading, and reduce friction. The shoulder shell is designed to handle axial load and keep the shaft from shifting. Both shells are matched to OE tolerances for crush and thickness to preserve ideal oil film clearance and ensure long life.
• Location: Inside the engine case, at the intermediate shaft bore, flanking the connecting housing
• Function: Provides radial support and axial control (shoulder shell) for the intermediate shaft
Over time, the intermediate shaft bearing shells may wear, lose geometry, or develop surface fatigue. Symptoms of failure include increased endplay (shaft axial movement), chain rattle, timing variation, and rapid wear of adjacent sprockets or tensioners.
This pair should be replaced during any engine rebuild, crankshaft pull, or when measurements show endplay outside specification. Installing fresh shells restores proper shaft location and timing stability for durable performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610113780
99610113780
99310113701
91610113700
99310113700
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII GT2 RS 2011-13
- Porsche 914 (1970-1976)
Price: €11.54 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99610143571/2
Product Information
Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 996 turbo / GT2 / GT3
Porsche 997.1 turbo / GT2 / GT3
Porsche 997.2 GT2 / GT3
This product supersedes Porsche's old part numbers:
- 90110113500
- 99310113500
Diagram ref no 30.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610143571
The product you are viewing cross references to these numbers
Product Information
Bearing shell for intermediate shaft (no/shoulder) - Sold as a pair Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 996 turbo / GT2 / GT3
Porsche 997.1 turbo / GT2 / GT3
Porsche 997.2 GT2 / GT3
This product supersedes Porsche's old part numbers:
- 90110113500
- 99310113500
Diagram ref no 30.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610143571
99610143570
90110113500
99310113500
99610143571
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
Price: €11.54 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
92860616100/1
Product Information
Fits:
Porsche 928
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92860616100
The product you are viewing cross references to these numbers
Product Information
Idle speed control valve. Fits:
Porsche 928
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92860616100
92860616100
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Price: €139.20 inc. VAT
Due In 30+ Days
Shop Securely
12 Month Warranty
Worldwide Delivery
95834933790/1
Product Information
1 required per car
Fits:
Porsche 958 Cayenne 3.6ltr V6 - 2014 to 2017
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834933790
The product you are viewing cross references to these numbers
Product Information
Front differential mounting bush - Rear bush1 required per car
Fits:
Porsche 958 Cayenne 3.6ltr V6 - 2014 to 2017
Porsche 958 Cayenne 4.8ltr V8 - 2014 to 2017
Porsche 958 Cayenne Diesel 3.0ltr - 2014 to 2017
Mounting bush for front differential to subframe.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834933790
95834933790
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Price: €20.30 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95834933780/1
Product Information
Sold each - 2 required per car
Fits:
Porsche 958 Cayenne 3.6ltr V6 - 2014 to 2017
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834933780
The product you are viewing cross references to these numbers
Product Information
Differential mounting bush - Front bushSold each - 2 required per car
Fits:
Porsche 958 Cayenne 3.6ltr V6 - 2014 to 2017
Porsche 958 Cayenne 4.8ltr V8 - 2014 to 2017
Porsche 958 Cayenne Diesel 3.0ltr - 2014 to 2017
Mounting bush for front differential to subframe.
Diagram ref no 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834933780
95834933780
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Price: €20.30 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
97010623201/1
Product Information
Fits:
Porsche 970 Panamera 2010 - 2016 3.0L / 3.6L / 4.8L engines
This component is integral to the engine's cooling system, facilitating the circulation of coolant between the radiator and the engine to maintain optimal operating temperatures.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97010623201
The product you are viewing cross references to these numbers
Product Information
Water radiator distributor tube. Right / Feed.Fits:
Porsche 970 Panamera 2010 - 2016 3.0L / 3.6L / 4.8L engines
This component is integral to the engine's cooling system, facilitating the circulation of coolant between the radiator and the engine to maintain optimal operating temperatures.
Diagram ref no 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97010623201
97010623201
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Price: €49.30 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
96434702510/1
Product Information
Fits:
Porsche 964 1989-94
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96434702510
The product you are viewing cross references to these numbers
Product Information
Steering U Joint lower. Fits:
Porsche 964 1989-94
Replace your Porsche 964 with this high-quality, OEM Steering U-Joint Lower, part number 96434702510. Designed for precision and durability, this component plays a vital role in ensuring smooth and responsive steering performance. Made to the exact specifications of Porsche, this U-joint connects the steering column to the steering rack, allowing for better control and enhanced driving experience. Whether you’re restoring your classic Porsche or performing maintenance, this U-joint is a direct replacement for the original part, ensuring a perfect fit and lasting reliability.
Key Features:
- OEM Quality: Manufactured to OE exacting standards.
- Precision Fit: Direct replacement for part number 96434702510.
- Durable Construction: Built for long-lasting performance under various driving conditions.
- Enhanced Steering Response: Ensures smooth and precise steering control.
Perfect for enthusiasts looking to restore or maintain their Porsche 964, this Steering U-Joint Lower guarantees optimal performance for your vehicle’s steering system. Add this essential component to your restoration project and drive with confidence!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96434702510
96434702510
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Price: €342.20 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
94610505177/1
Product Information
Sold each - 2 required per car
Fits:
Porsche 718 Boxster / S / T- 2017 Onwards
Porsche 991.2 - 2016 to 2019
Porsche 992 - 2019 Onwards
Porsche 95B Macan V6 Petrol - 2014 to 2018
Porsche 958 Cayenne / GTS 3.6ltr V6 - 2010 to 2017
Porsche 970.2 Panamera / S 3.0ltr V6 - 2014 to 2016
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610505177
The product you are viewing cross references to these numbers
Product Information
Camshaft adjuster unit inlet valves. Sold each - 2 required per car
Fits:
Porsche 718 Boxster / S / T- 2017 Onwards
Porsche 991.2 - 2016 to 2019
Porsche 992 - 2019 Onwards
Porsche 95B Macan V6 Petrol - 2014 to 2018
Porsche 958 Cayenne / GTS 3.6ltr V6 - 2010 to 2017
Porsche 970.2 Panamera / S 3.0ltr V6 - 2014 to 2016
Click 'Zoom in' for large parts diagram.
Diagram ref no 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610505177
94610505176
0PB109083
0PB109083A
94610505177
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
Price: €342.20 inc. VAT
Orderable - 42 to 59 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
94610505277/1
Product Information
Sold each - 2 required per car
Fits:
Porsche 718 Boxster / S / T- 2017 Onwards
Porsche 991.2 - 2016 to 2019
Porsche 992 - 2019 Onwards
Porsche 95B Macan V6 Petrol - 2014 to 2018
Porsche 958 Cayenne / GTS 3.6ltr V6 - 2010 to 2017
Porsche 970.2 Panamera / S 3.0ltr V6 - 2014 to 2016
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610505277
The product you are viewing cross references to these numbers
Product Information
Camshaft adjuster unit exhaust valves. Sold each - 2 required per car
Fits:
Porsche 718 Boxster / S / T- 2017 Onwards
Porsche 991.2 - 2016 to 2019
Porsche 992 - 2019 Onwards
Porsche 95B Macan V6 Petrol - 2014 to 2018
Porsche 958 Cayenne / GTS 3.6ltr V6 - 2010 to 2017
Porsche 970.2 Panamera / S 3.0ltr V6 - 2014 to 2016
Click 'Zoom in' for large parts diagram.
Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94610505277
94610505277
0PB109084C
0PB109084
94610505276
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
Price: €342.20 inc. VAT
Orderable - 42 to 59 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
91453182
Product Information
Fits:
Porsche 914 - 1970 to 1973
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91453182
The product you are viewing cross references to these numbers
Product Information
Securing strip targa roof front seal. Fits:
Porsche 914 - 1970 to 1973
Click 'Zoom in' for large parts diagram.
Diagram ref no 27
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91453182
91453182310
91453182410
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 914 (1970-1976)
Choose Side
Prices from: €87.00 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
97010623101/1
Product Information
Fits:
Porsche 970 Panamera 2010 - 2016 3.6L / 4.8L
Porsche 970 Panamera 2010 - 2016 3.0L*
* Pre fitted temperature sensor can be removed and old bung swapped in it's place.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97010623101
The product you are viewing cross references to these numbers
Product Information
Water radiator distributor tube. Left / Return. Includes new temperature sensorFits:
Porsche 970 Panamera 2010 - 2016 3.6L / 4.8L
Porsche 970 Panamera 2010 - 2016 3.0L*
* Pre fitted temperature sensor can be removed and old bung swapped in it's place.
This component is integral to the engine's cooling system, facilitating the circulation of coolant between the radiator and the engine to maintain optimal operating temperatures.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97010623101
97010623101
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Price: €57.94 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
433906060/1
Product Information
Fits:
Porsche 924 1979-85 2.0L
* Please check and match the part number of your relay in your car before ordering.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
433906060
The product you are viewing cross references to these numbers
Product Information
Fuel pump relay. Porsche 924 1979-85Fits:
Porsche 924 1979-85 2.0L
* Please check and match the part number of your relay in your car before ordering.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
433906060
433906059
433906060
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
Price: €69.54 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99311119500/1KIT
Product Information
3 required per side
This exhaust seal ring is designed for Porsche 964 and 993 models, replicating the original gasket’s fit, function, and durability. It provides a gas-tight seal between the exhaust manifold or heat exchanger and the cylinder head, restoring quiet, leak-free, and efficient exhaust performance.
Fits:
Porsche 964 C2 / C4 / Carrera RS 1989-94
Porsche 993 Carrera / Turbo 1995-98
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99311119500
The product you are viewing cross references to these numbers
Product Information
Exhaust seal ring for heat exchangers, SET OF 63 required per side
This exhaust seal ring is designed for Porsche 964 and 993 models, replicating the original gasket’s fit, function, and durability. It provides a gas-tight seal between the exhaust manifold or heat exchanger and the cylinder head, restoring quiet, leak-free, and efficient exhaust performance.
Fits:
Porsche 964 C2 / C4 / Carrera RS 1989-94
Porsche 993 Carrera / Turbo 1995-98
Diagram ref no 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99311119500
99311119500
71-24953-30
712495330
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
6 x Exhaust seal ring for heat exchangers. Porsche 964 / 993 (99311119500/1
Vehicle Group
Vehicle Group
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
Price: €62.64 inc. VAT
In Stock - 3- 5 Days Dispatch
