OE Match

Gearshift lever. Porsche 924 / 924S / 944



Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91

This set includes everything necessary to eliminate the shift lever play:
- Shift lever 
- Ball socket
- Circlip
- Spring washer

Click 'Zoom in' for large parts diagram.
Diagram ref no 18, 22, 27 and 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477711205DKIT

The product you are viewing cross references to these numbers

Mounting kit for heat exchanger.

Fits:
Porsche 911 Carrera 3.2ltr - 1984 to 1989
Porsche 911 turbo (930 turbo) 3.3ltr 1984 to 1989

Kit includes:
1 x Large gasket for mounting heat exchanger to intermediate tube
3 x Gasket for heat exchanger to cylinder head. 3 pcs. required for each heat exchanger
3 x Bolt, M8x1.25x40mm
3 x Nut M8x1.25, for mounting heat exchanger to cylinder head
3 x Lock nut, M8x1.25
3 x Nut, M8x1.25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FITTINGKIT31

The product you are viewing cross references to these numbers

Mounting kit for heat exchanger.

Fits:
Porsche 911 E/S (mech. injection) 2.4ltr / 2.7ltr - 08/1971 to 07/1976
Porsche 911 T (not mech. injection) 2.0ltr / 2.4ltr - 01/1963 to 07/1973
Porsche 911 / 911S / 911 Carrera 2.7ltr - 08/1973 to 07/1975

Kit includes:
3 x heat exchanger gaskets
1 x rear silencer gasket
2 x M10 silencer bolt
2 x M10 silencer nut
3 x M8 heat exchanger nut
3 x M8 beat exchanger barrel nut
1 x M6 nut
1 x M6 washer, nuts & bolts

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FITTINGKIT30

The product you are viewing cross references to these numbers

Mounting Kit rear exhaust silencer. 

Fits:
Porsche 997.1 Carrera 2 / Carrera  4 3.6ltr - 2005 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S 3.8ltr - 2005 to 2008 

Included in kit:
2 x Pipe Connector, 55x58.5x75mm, stainless steel
2 x Bolt, M8x1.25x140mm
2 x Bolt, M8x1.25x70mm
4 x Lock nut, M8x1.25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FITTINGKIT29

The product you are viewing cross references to these numbers

Gearbox oil pan filter with gasket and oil kit. 



Fits:
Porsche 970.1 Panamera PDK - 2009 to 2013
Porsche 970.2 Panamera PDK - 2014 to 2014

Kit Includes
Oil pan, with drain plug

Fixing screws x 14
ATF III transmission fluid x 9ltrs

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97032102500KIT

The product you are viewing cross references to these numbers

Gearbox mounting kit. 



Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965

This gearbox mount set includes the rear left and right mounts, positioned at an angle on the side of the gearbox, as well as the two front round rubber mounts. Even without visible damage the aging rubber in the bearing block can become porous, causing unwanted play in the transmission within its holder. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 43 and 49

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

5192009KIT

The product you are viewing cross references to these numbers

Gasket kit rear silencer. 

Fits:
Porsche 911 - 1975 to 1989
For 2.7ltr / 3.0ltr / 3.2ltr engine

This kit consists of a flange gasket, three stainless steel screws and three nuts for sealing the exhaust silencer flange.
The seal is suitable for the Porsche 911 G models from 1975 to 1989 to connect the pre-silencer to the rear silencer.

Lambda oxygen sensor engine kit - before and after catalytic converter.
Kit includes 4 x Lambda sensors

Fits:
Porsche 986 Boxster 2.7ltr - 2003 Onwards
Porsche 986 Boxster S 3.2ltr - 2003 Onwards

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98660622601KIT2

The product you are viewing cross references to these numbers

Chain cover rubber sealing plugs (SET OF 18)



Fits:
Porsche 964 - 1989 to 1994
Porsche 964 turbo 3.6ltr - 1991 to 1994
Porsche 993 - 1994 to 1997

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410514001

The product you are viewing cross references to these numbers

Valve spring engine set.
Complete engine valve spring set - inner and outer springs



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994

Valve springs endure significant thermal stress, which can cause them to lose tension over time. A broken spring can lead to severe engine damage, therefore, it's crucial to inspect and replace the springs as needed during an engine overhaul. The intake and exhaust valves use identical springs, consisting of an inner and outer spring pair for each valve. Alongside these, we offer a comprehensive selection of engine repair components, including valve stem seals and valve guides.

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPRINGKIT01

The product you are viewing cross references to these numbers

Camshaft and timing chain cover washer pack 8,4. 
Pack of 100 washers



Fits:
Porsche 911 - 1965 to 1989
Porsche 964 turbo - 1991 to 1993
Porsche 914-6 - 1970 to 1976

Washer used in numerous locations from
Cam covers
Timing chain covers
Throttle bodies

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WASHERKIT02

The product you are viewing cross references to these numbers

Oil pipe kit for hydraulic timing chain tensioners. 

Fits:
Porsche 911 SC - 1978 to 1982 (Cars with hydraulic chain tensioner upgrade)
Porsche 911 turbo 1975 to 1984 (Cars with hydraulic chain tensioner upgrade)
Porsche 911 - 1984 to 1989

Oil lines may seem like minor components, but if they become defective, they can lead to significant damage. These lines connect the engine, oil cooler, or timing chain tensioner, often functioning for years without issue. However, if a crack or break occurs, substantial amounts of oil can leak out—potentially draining the entire oil tank—and the affected component will no longer receive a reliable supply of engine oil.

To prevent such damage, it's recommended to replace aging oil hoses or lines before any issues arise. Full restorations generally involve replacing all oil lines to ensure reliability. Here, you can find high-quality replacement parts as described in the title.

Diagram ref no 8, 9, 10, 11, 14, 15, 24, 25, 26 and 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

OILPIPEKIT02

The product you are viewing cross references to these numbers