OE Match

Auxiliary water pump.

Fits:
Porsche 955 Cayenne S 4.5L 2003-06 (D9K)
Porsche 955 Cayenne Turbo 4.5L 2003-06 (D9L)
Valid up to:
F >> 9P6LA 01562
F >> 9P6LA 41356
F >> 9P6LA 80630

Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95557215002

The product you are viewing cross references to these numbers

Oil level sensor.

Fits:
Porsche 970 Panamera 3.6L 2014-16
Porsche 970 Panamera 4.8L Turbo 2014-16

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94860617000

The product you are viewing cross references to these numbers

Boost pressure sensor

Fits:
Porsche 970.2 Panamera Diesel 3.0ltr - 2014 to 2016 (Engine code CWJA)

Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

03K906051

The product you are viewing cross references to these numbers

Air intake manifold pressure sensor. 

Fits:
Porsche 958 Cayenne S Hybrid 3.0ltr V6 - 2010 to 2017
Porsche 970 Panamera S Hybrid 3.0ltr V6 - 2009 to 2013

Diagram ref no. 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860618000

The product you are viewing cross references to these numbers

Oil pressure sender. 
Sits on oil filter housing.

Fits:
Porsche 997.2  Carrera >>2009 (5 bar)
Porsche 997 GT3 2007-11
Porsche 997 Turbo 2007-13
Porsche 987.2 Boxster >>2009 (5 bar)
Porsche 987.2 Cayman >>2009 (5 bar)
Porsche 957 Cayenne 4.8L 2007-10  (on crankcase)

Diagram ref no 7 or 23 (for 957 Cayenne)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99760620303

The product you are viewing cross references to these numbers

Camshaft position sensor (Hall sender).
Sold EACH.

Fits:
Porsche 958 Cayenne 3.6L V6 Turbo / Turbo GTS 2015-18
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18

Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94660610600

The product you are viewing cross references to these numbers

Impulse / speed reference sensor.

Fits:
Porsche 964 1989-94  (requires ADAPTORKIT01)
Porsche 993 1995-98 (requires  ADAPTORKIT01)
Porsche 996 Turbo 2001-05 (6-speed Manual transmission)

Please note: this part has been changed by Porsche and you may require adaptor kit for plug connector.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99660610500

The product you are viewing cross references to these numbers

Engine Crankshaft Position Sensor

The OE Match Engine Crankshaft Position Sensor is a critical component responsible for monitoring the position and rotational speed of the crankshaft. This data is sent directly to the engine control unit (ECU), allowing it to precisely manage fuel injection, ignition timing, and other essential engine functions. Without accurate crankshaft information, the ECU cannot properly control spark or fuel timing, leading to poor performance—or preventing the engine from running altogether.

Crankshaft position sensors typically use either magnetic or Hall-effect technology. Magnetic sensors generate a signal with a coil and magnet as the engine rotates, while Hall-effect sensors rely on a semiconductor that detects changes in magnetic fields. These sensors are commonly located near the crankshaft pulley/harmonic balancer or by the flywheel, depending on the engine design. They read notches or teeth on a reluctor (tone wheel) to create a signal the ECU can interpret.

Over time, heat, vibration, and contamination from oil, dirt, or metal debris can compromise the sensor’s internal circuitry, leading to inaccurate or lost signals. When the sensor begins to fail, drivability issues often follow—including stalling, rough idle, misfires, or a complete no-start condition.

Fits:
Porsche 95B.2 Macan S V6 3.0ltr - 2019 to 2021
Porsche 95B.2 Macan GTS V6 2.9ltr -  2019 to 2021
Porsche 95B.2 Macan turbo V6 2.9ltr - 2019 to 2021

Porsche 971.1 Panamera V6- 2017 to 2020
Porsche 971.1 Panamera V8 - 2017 to 2020
Porsche 971.2 Panamera V6 - 2021 to 2023
Porsche 971.2 Panamera V8 - 2021 to 2023

Porsche 9YA Cayenne V6 - 2018 to 2023
Porsche 9YA Cayenne V8 - 2018 to 2023

Symptoms of a Failing Crankshaft Position Sensor

• No-Start Condition

If the ECU does not receive a valid RPM signal from the sensor, the engine cannot start.

• Stalling When Warm

A failing sensor often causes the engine to stall when coming to a stop once it reaches operating temperature.

• Erratic or Dead Tachometer

Some older vehicles rely on the crankshaft sensor for tachometer readings. Strange tach behavior combined with running issues may point to CPS failure.

• Diagnostic Trouble Code P0335

A failing internal circuit may trigger code P0335, although not all faulty sensors will cause a check engine light.

• Poor Performance at Certain RPMs

Intermittent or out-of-range signals can cause timing drift, leading to performance issues—often more noticeable at high RPM or idle.

• Misfires Across Multiple Cylinders

Because the CPS affects overall ignition and fuel timing, failure can lead to misfires across all cylinders, unlike coil or injector failures that typically affect just one.

Diagram ref no 26

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958906433

The product you are viewing cross references to these numbers

Water pump for heating system.

Fits:
Porsche 971 Panamera PETROL 2017>> (I0K0 / I1A2 / I9M1 / I9M9)
Porsche 971 Panamera DIESEL 2017>> (I0K0 / I0F5 / I9M1 / I9M9)
Porsche 971 Panamera HYBRID 2017>> (I0K3 / I9M0 / I1A2)
Porsche 971.2 Panamera
Porsche Cayenne (9YA) 2018>> (I9M9)
Porsche 992.1 Carrera / Turbo / GT3

I0K0 - cars without alternative drive system
I9M0 - cars without auxiliary/parking heater
I0F5 - cars with Diesel fuel system
I1A2 - cars with petrol direct fuel injection (DFI)
I9M1 - cars with auxiliary water heater with timer
I9M9 - cars with auxiliary water heater with timer and remote control
I9M5 - cars with preheater for diesel
I0K3 - cars with hybrid drive system PHEV

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A712160110

The product you are viewing cross references to these numbers

Turbocharger water pump.

Fits:
Porsche 997.1 Turbo 2007-09 (Engine 9770)
Porsche 997.2 Turbo 2010-13 (Engine 9770)

Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99762025102

The product you are viewing cross references to these numbers

Water pump Electric.

 
Fits:
Porsche 958 Cayenne Hybrid 3.0L 2011 - 2018
Porsche 970 Panamera Hybrid 3.0L 2011 - 2016

Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95860656700

The product you are viewing cross references to these numbers

Electric coolant pump.

Fits:
Porsche 971.1 Panamera Turbo E-Hybrid 4.0L 2017 - 2020
Porsche 971.2 Panamera Turbo E-Hybrid 4.0L 2021 - 2024

Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A796556740

The product you are viewing cross references to these numbers

Coolant pump auxiliary heating.

Fits:
Porsche 955 Cayenne S V8 4.5L  (D9K) 2003 - 2006
Porsche 955 Cayenne  Turbo  V8 4.5L (D9L) 2003 - 2006 
Valid from:
F 9P6LA 01563 >>
F 9P6LA 41357 >>
F 9P6LA 80631 >>

Porsche 957 Cayenne S/GTS  V8   4.8L  (D5V) 2007 - 2010
Porsche 957 Cayenne Turbo V8 4.8L (D5Z) 2007- 2010
* cars with 4-zone air conditioning system (option code: 9AH)

Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95557215006

The product you are viewing cross references to these numbers

Black plastic end cap for the front wiper arm - covers and protects the mounting fasteners. 

Sold individually; x2 required per vehicle. 

Fits:
Porsche 911 Carrera 3.2L 1987-89
Porsche 911 Turbo (930) 3.3L 1987-89
Porsche 964 Carrera 3.6L 1989-91
Porsche 964 Turbo 3.3L 1991
Porsche 928 1978-90*
Porsche 959 1987-88

*NOTE: This cap is also used for the rear wiper arm on Porsche 928 models equipped with a rear spoiler, produced between 1981 and 1990.

Diagram ref. 27.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92862862300

The product you are viewing cross references to these numbers

Fastening nut for steering wheel.


Fits:
Porsche 356A - 1955 to 1959

This is a new steering wheel hexagon nut, just like the original nut where it has the step indentation. CnC machined to the correct depth to allow the steering wheel to have several mm of teeth on the nut to tighten correctly as this is very important. This is the most crucial nut needed to tighten the steering wheel on your Porsche 356A so get the right nut and finish that restoration project right. 

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35647201

The product you are viewing cross references to these numbers

Banjo ring fitting for brake line. 
Sold each - 2 required for 356 and 4 required for 911 turbo

Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 911 turbo 1984 to 1986

This is a great part to get when working with your brake restoration project. This is a new banjo bolt or 'ring fitting' for your Porsche 356, 356A, 356B and 911 turbo. These fit the front lower wheel cylinders on 356 (2 required) and front and rear brake calipers on the 911 turbo (4 requited)

Diagram ref no 17 and fit to 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99921502703

The product you are viewing cross references to these numbers