Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
About OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
99661311402/1
Product Information
This clutch pedal switch sits behind the clutch pedal and communicates pedal position to the vehicle’s electrical systems. When the clutch pedal is depressed or released, it relays that signal to the starter, cruise control, PSM (Porsche Stability Management), and other relevant systems that depend on clutch position information. Designed to match the original part’s electrical characteristics, housing, and fitment, it installs into the factory mounting point without modification.
Sold Each.
Fits:
Porsche 986 Boxster 1997 - 2004 (M249 / M454)
Porsche 987 Boxster MKI & MKII 2005 - 2012
Porsche 987C Cayman MKI & MKII 2005 - 2012
Porsche 996 C2 / C4 >>1999 (M454)
Porsche 996 C2 / C4 / C4S 2000 - 2005
Porsche 996 Turbo 2001 - 2005 (M454)
Porsche 996 GT3 1999 - 2005
Porsche 997 Carrera MKI 2005 - 2008 (I480)
Porsche 997 Carrera MKII 2009 - 2012
Porsche 997 Turbo MKI & MKII 2007 - 2013
Porsche 997 GT3 2007 - 2011
* M249 - Tiptronic Transmission
* M454 - Automatic Speed Control
* I480 - 6-Speed Manual Transmission
Diagram Ref No 17
The clutch pedal switch ensures the vehicle can only be started when the clutch is depressed, enhances safety by providing input to cruise control and transmission logic, and informs stability and traction systems of clutch engagement status. A properly functioning switch prevents starter engagement unless conditions are safe and contributes to smooth operation of related vehicle functions.
Function:
As a microswitch mounted near the clutch pedal, this part closes and opens its contact in sync with pedal travel. That change in contact state is interpreted by the vehicle’s ECU and safety systems, enabling starter activation, cancelling cruise when appropriate, and helping ensure proper control logic throughout the driveline. Its OE-match design ensures consistent signal quality and long service life in typical operating environments.
A failed clutch pedal switch can prevent the engine from starting, inhibit cruise control function, trigger false warnings, or interfere with stability control inputs. Because it’s a safety-critical sensor tied to multiple control systems, replacing a worn, intermittent, or failed switch with an OE Match part ensures proper system response and restores reliable interface between the clutch and vehicle electronics.
When to replace:
• Engine won’t start unless specific clutch pedal positions are met
• Cruise control doesn’t engage or disengages unexpectedly
• Clutch position signal feels intermittent or inconsistent
• Dashboard warnings related to clutch/safety logic
• During clutch or pedal assembly service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99661311402
The product you are viewing cross references to these numbers
Product Information
Clutch Pedal PSM / Cruise Switch. This clutch pedal switch sits behind the clutch pedal and communicates pedal position to the vehicle’s electrical systems. When the clutch pedal is depressed or released, it relays that signal to the starter, cruise control, PSM (Porsche Stability Management), and other relevant systems that depend on clutch position information. Designed to match the original part’s electrical characteristics, housing, and fitment, it installs into the factory mounting point without modification.
Sold Each.
Fits:
Porsche 986 Boxster 1997 - 2004 (M249 / M454)
Porsche 987 Boxster MKI & MKII 2005 - 2012
Porsche 987C Cayman MKI & MKII 2005 - 2012
Porsche 996 C2 / C4 >>1999 (M454)
Porsche 996 C2 / C4 / C4S 2000 - 2005
Porsche 996 Turbo 2001 - 2005 (M454)
Porsche 996 GT3 1999 - 2005
Porsche 997 Carrera MKI 2005 - 2008 (I480)
Porsche 997 Carrera MKII 2009 - 2012
Porsche 997 Turbo MKI & MKII 2007 - 2013
Porsche 997 GT3 2007 - 2011
* M249 - Tiptronic Transmission
* M454 - Automatic Speed Control
* I480 - 6-Speed Manual Transmission
Diagram Ref No 17
The clutch pedal switch ensures the vehicle can only be started when the clutch is depressed, enhances safety by providing input to cruise control and transmission logic, and informs stability and traction systems of clutch engagement status. A properly functioning switch prevents starter engagement unless conditions are safe and contributes to smooth operation of related vehicle functions.
Function:
As a microswitch mounted near the clutch pedal, this part closes and opens its contact in sync with pedal travel. That change in contact state is interpreted by the vehicle’s ECU and safety systems, enabling starter activation, cancelling cruise when appropriate, and helping ensure proper control logic throughout the driveline. Its OE-match design ensures consistent signal quality and long service life in typical operating environments.
A failed clutch pedal switch can prevent the engine from starting, inhibit cruise control function, trigger false warnings, or interfere with stability control inputs. Because it’s a safety-critical sensor tied to multiple control systems, replacing a worn, intermittent, or failed switch with an OE Match part ensures proper system response and restores reliable interface between the clutch and vehicle electronics.
When to replace:
• Engine won’t start unless specific clutch pedal positions are met
• Cruise control doesn’t engage or disengages unexpectedly
• Clutch position signal feels intermittent or inconsistent
• Dashboard warnings related to clutch/safety logic
• During clutch or pedal assembly service
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99661311402
99661311401
99661311400
99661311402
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£10.76 inc. VAT
Now £9.68 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
98710650131/1
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98710650131
The product you are viewing cross references to these numbers
Product Information
Water Coolant Hose, Feed. Fits:
Porsche 987.2 Boxster / Boxster S 2009>>2012
Porsche 987.2 Cayman / Cayman S 2009>>2012
Diagram Ref No 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98710650131
98710650131
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: £57.03 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
99906705009/1
Product Information
This bolt secures the brake caliper bracket to the hub carrier, ensuring the caliper remains rigid, aligned and tensioned under braking loads. Manufactured to OE tolerance, the bolt features correct thread pitch (M12 × 1.5), length (77 mm), socket head style. This bolt is designed for use with front and rear brake calipers on selected Porsche 996, 997 and 981 models.
Sold Each, 2x bolts required per caliper.
Fits:
Porsche 996 C4S 2002 - 2005 (FRONT & REAR calipers)
Porsche 996 TURBO 2000 - 2005 (FRONT & REAR calipers)
Porsche 997 MKI C2S / C4S 3.8L 2005 - 2008 (FRONT & REAR calipers)
Porsche 997 MKII C2S / C4S 3.8L 2009 - 2012 (FRONT & REAR calipers)
Porsche 981 Boxster 2.7L 2012 - 2016 (FRONT calipers)
Porsche 981C Cayman 2.7L 2013 - 2016 (FRONT calipers)
Diagram Ref No 8
• Position on Vehicle: Brake caliper mounting bolt, caliper bracket to hub carrier, various caliper positions (front & rear) depending on model.
• Part Specification: Thread – M12 × 1.5; Length – 77 mm; Socket head style
• Function: Secures the brake caliper to the hub carrier, provides correct clamp load, ensures caliper remains correctly aligned and rigid under braking forces, prevents movement or flex that can affect braking performance, rotor alignment and pad wear.
Though often overlooked, the caliper mounting bolts perform a critical role in your braking system. Worn, stretched or reused bolts can lose clamping load, causing caliper movement, noise, uneven pad wear, rotor alignment issues or brake performance degradation. Replacing with a correct OE-Match bolt ensures proper retention, alignment and durability.
When and why to replace:
• The caliper has been removed or serviced (pad change, rotor replacement) and original bolts have been re-used multiple times.
• Bolts show signs of thread damage, corrosion, visible stretch (elongation) or wear on the socket head.
• You’re installing new calipers, rotors or upgrading to performance braking and want to renew all fasteners.
• You’re performing brake pad/rotor service and want to ensure all hardware is new for correct torque, clamp load and safe performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99906705009
The product you are viewing cross references to these numbers
Product Information
Brake caliper mounting bolt, M12 x 1.5 x 77. This bolt secures the brake caliper bracket to the hub carrier, ensuring the caliper remains rigid, aligned and tensioned under braking loads. Manufactured to OE tolerance, the bolt features correct thread pitch (M12 × 1.5), length (77 mm), socket head style. This bolt is designed for use with front and rear brake calipers on selected Porsche 996, 997 and 981 models.
Sold Each, 2x bolts required per caliper.
Fits:
Porsche 996 C4S 2002 - 2005 (FRONT & REAR calipers)
Porsche 996 TURBO 2000 - 2005 (FRONT & REAR calipers)
Porsche 997 MKI C2S / C4S 3.8L 2005 - 2008 (FRONT & REAR calipers)
Porsche 997 MKII C2S / C4S 3.8L 2009 - 2012 (FRONT & REAR calipers)
Porsche 981 Boxster 2.7L 2012 - 2016 (FRONT calipers)
Porsche 981C Cayman 2.7L 2013 - 2016 (FRONT calipers)
Diagram Ref No 8
• Position on Vehicle: Brake caliper mounting bolt, caliper bracket to hub carrier, various caliper positions (front & rear) depending on model.
• Part Specification: Thread – M12 × 1.5; Length – 77 mm; Socket head style
• Function: Secures the brake caliper to the hub carrier, provides correct clamp load, ensures caliper remains correctly aligned and rigid under braking forces, prevents movement or flex that can affect braking performance, rotor alignment and pad wear.
Though often overlooked, the caliper mounting bolts perform a critical role in your braking system. Worn, stretched or reused bolts can lose clamping load, causing caliper movement, noise, uneven pad wear, rotor alignment issues or brake performance degradation. Replacing with a correct OE-Match bolt ensures proper retention, alignment and durability.
When and why to replace:
• The caliper has been removed or serviced (pad change, rotor replacement) and original bolts have been re-used multiple times.
• Bolts show signs of thread damage, corrosion, visible stretch (elongation) or wear on the socket head.
• You’re installing new calipers, rotors or upgrading to performance braking and want to renew all fasteners.
• You’re performing brake pad/rotor service and want to ensure all hardware is new for correct torque, clamp load and safe performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99906705009
99906705009
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche Cayman 2.7L 981 2013-16
£3.76 inc. VAT
Now £3.38 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99633351103/1
Product Information
Fits Left Or Right.
Fits:
Porsche 996 1998>>2005
Porsche 996 Turbo 2001>>2005
Porsche 997 Carrera MKI 2005>>2008
Porsche 997 Carrera MKII 2009>>2012
Porsche 997 Turbo MKI 2007>>2009
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633351103
The product you are viewing cross references to these numbers
Product Information
Shock Absorber Compensating Plate, Rear 4.0MM.Fits Left Or Right.
Fits:
Porsche 996 1998>>2005
Porsche 996 Turbo 2001>>2005
Porsche 997 Carrera MKI 2005>>2008
Porsche 997 Carrera MKII 2009>>2012
Porsche 997 Turbo MKI 2007>>2009
Porsche 997 Turbo MKII 2010>>2013
Porsche 997 GT3 MKI / MKII 2007>>2011
Diagram Ref No 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633351103
99633351103
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
Price: £16.95 inc. VAT
Due In 30+ Days
Shop Securely
12 Month Warranty
Worldwide Delivery
9P1412149/1
Product Information
Sold Each.
x2 Required Per Car.
Fits:
Porsche 981 Boxster 2012>>2016
Porsche 981C Cayman 2014>>2016
Porsche 981 Spyder 2016>>2016
Porsche 982 Boxster 2017>>
Porsche 982C Cayman 2017>>
Porsche 991.1 Carrera 2012>>2016
Porsche 991.1 Turbo 2014>>2016
Porsche 991.2 Carrera 2017>>2019
Porsche 991.2 Turbo 2017>>2020
Porsche 992.1 Carrera 2019>>
Porsche 992.1 Turbo 2020>>
Porsche 992.2 Carrera 2024>>
Cars With Option Codes:
1X1 - Four-Wheel Drive
1X2 - Rear-Wheel Drive
A8C - Comfort Equipment
A8F - Sports Equipment
1BH - Suspension/Shock Absorption, Standard 2
1BV - Sports Suspension/Shock Absorption
2UA - Standard Design
2UH - Controlled Suspension System
E7S - 992 Dakar
1BM - Standard Suspension/Shock Absorption
2UM - Chassis With Increased Ride Height 2
FM0 - Basic
Diagram Ref No 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1412149
The product you are viewing cross references to these numbers
Product Information
Front Shock Absorber Top Mount Underlay Pad, Upper.Sold Each.
x2 Required Per Car.
Fits:
Porsche 981 Boxster 2012>>2016
Porsche 981C Cayman 2014>>2016
Porsche 981 Spyder 2016>>2016
Porsche 982 Boxster 2017>>
Porsche 982C Cayman 2017>>
Porsche 991.1 Carrera 2012>>2016
Porsche 991.1 Turbo 2014>>2016
Porsche 991.2 Carrera 2017>>2019
Porsche 991.2 Turbo 2017>>2020
Porsche 992.1 Carrera 2019>>
Porsche 992.1 Turbo 2020>>
Porsche 992.2 Carrera 2024>>
Cars With Option Codes:
1X1 - Four-Wheel Drive
1X2 - Rear-Wheel Drive
A8C - Comfort Equipment
A8F - Sports Equipment
1BH - Suspension/Shock Absorption, Standard 2
1BV - Sports Suspension/Shock Absorption
2UA - Standard Design
2UH - Controlled Suspension System
E7S - 992 Dakar
1BM - Standard Suspension/Shock Absorption
2UM - Chassis With Increased Ride Height 2
FM0 - Basic
Diagram Ref No 13
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1412149
9P1412149
99134351101
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 (911) Dakar 3.0L 2023-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
£16.95 inc. VAT
Now £15.25 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
98710650231/1
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98710650231
The product you are viewing cross references to these numbers
Product Information
Water Coolant Hose, Return.
Fits:
Porsche 987.2 Boxster / Boxster S 2009>>2012
Porsche 987.2 Cayman / Cayman S 2009>>2012
Diagram Ref No 17
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98710650231
98710650231
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Price: £57.03 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
99654552104/1
Product Information
Fits:
Porsche 996 Carrera 1998>>2005
Porsche 996 Turbo 2001>>2005
Porsche 996 GT3 1999>>2005
Diagram Ref No 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99654552104
The product you are viewing cross references to these numbers
Product Information
Rear Window Glass Frame Seal.Fits:
Porsche 996 Carrera 1998>>2005
Porsche 996 Turbo 2001>>2005
Porsche 996 GT3 1999>>2005
Diagram Ref No 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99654552104
99654552104
99654552103
99654552101
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Price: £43.20 inc. VAT
Due In 30+ Days
Shop Securely
12 Month Warranty
Worldwide Delivery
9P1412269/1
Product Information
Compensation ring (spacer ring) for the front shock absorber/strut assembly. Manufactured to match factory specifications for fit and function, it serves as a direct replacement for the original Porsche part without modification.
Sold each, 2 required per vehicle.
Fits:
Porsche 981 Boxster 2012 - 2016
Porsche 981SP Boxster Spyder 2016
Porsche 982 (718) Boxster 2017 >>
Porsche 981C Cayman 2014 - 2016
Porsche 982C (718C) Cayman 2017 >>
Porsche 991.1 Carrera 2012 - 2016
Porsche 991.2 Carrera 2017 - 2019
Porsche 991 Turbo 2014 - 2020
Porsche 992.1 Carrera 2019 - 2024
Porsche 992.1 DAKAR 2023 - 2024
Porsche 992.2 Carrera 2024 >>
Porsche 992 Turbo 2020 >>
Diagram Ref No 5
This compensation ring provides precise spacing between shock absorber components, ensuring correct stack height and secure clamping of suspension hardware. It helps prevent misalignment, unwanted movement, or noise caused by incorrect component positioning.
Installed as part of the front damper or strut mounting assembly, the ring acts as a precision spacer that maintains factory-specified tolerances. By ensuring proper seating and load distribution, it supports smooth suspension operation and helps preserve correct geometry and alignment.
Even small suspension hardware components play a critical role in overall system integrity. A worn, damaged, or missing compensation ring can affect clamping force and alignment within the strut assembly, leading to noise, premature wear, or altered suspension behaviour. Replacing it with a fresh component restores correct fitment and helps ensure long-term suspension reliability.
When to replace:
• During front shock or strut replacement
• Ring is corroded, distorted, or damaged during removal
• Persistent front-end noise traced to strut hardware
• Suspension rebuild or geometry correction work
• Replacing superseded part 99134351300
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1412269
The product you are viewing cross references to these numbers
Product Information
Front Shock Absorber Compensation Ring.Compensation ring (spacer ring) for the front shock absorber/strut assembly. Manufactured to match factory specifications for fit and function, it serves as a direct replacement for the original Porsche part without modification.
Sold each, 2 required per vehicle.
Fits:
Porsche 981 Boxster 2012 - 2016
Porsche 981SP Boxster Spyder 2016
Porsche 982 (718) Boxster 2017 >>
Porsche 981C Cayman 2014 - 2016
Porsche 982C (718C) Cayman 2017 >>
Porsche 991.1 Carrera 2012 - 2016
Porsche 991.2 Carrera 2017 - 2019
Porsche 991 Turbo 2014 - 2020
Porsche 992.1 Carrera 2019 - 2024
Porsche 992.1 DAKAR 2023 - 2024
Porsche 992.2 Carrera 2024 >>
Porsche 992 Turbo 2020 >>
Diagram Ref No 5
This compensation ring provides precise spacing between shock absorber components, ensuring correct stack height and secure clamping of suspension hardware. It helps prevent misalignment, unwanted movement, or noise caused by incorrect component positioning.
Installed as part of the front damper or strut mounting assembly, the ring acts as a precision spacer that maintains factory-specified tolerances. By ensuring proper seating and load distribution, it supports smooth suspension operation and helps preserve correct geometry and alignment.
Even small suspension hardware components play a critical role in overall system integrity. A worn, damaged, or missing compensation ring can affect clamping force and alignment within the strut assembly, leading to noise, premature wear, or altered suspension behaviour. Replacing it with a fresh component restores correct fitment and helps ensure long-term suspension reliability.
When to replace:
• During front shock or strut replacement
• Ring is corroded, distorted, or damaged during removal
• Persistent front-end noise traced to strut hardware
• Suspension rebuild or geometry correction work
• Replacing superseded part 99134351300
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1412269
9P1412269
99134351300
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 (911) Dakar 3.0L 2023-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
- Porsche 992.2 Turbo 3.6L 2024>>
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
£14.95 inc. VAT
Now £13.45 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
SUSPENSIONKIT993.1
Product Information
Fits:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT993.1
The product you are viewing cross references to these numbers
Product Information
The suspension control arms connect the suspension and steering knuckle to the chassis and allow the suspension to move and articulate over bumps and road imperfections. Control arms utilize bushings and ball joints to make these connections and those are the parts of the control arm that wear out and fail. Worn ball joints and bushings will cause vibration and clunking when driving, uneven tire wear, cause the vehicle to pull in one direction, and increase stopping distances.
This control arm kit will restore the handling and driving performance of your 993. Included in our kit are the rear control arms for the left and right sides.
Fits:
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
Suspension Control Arm Kit
Control arms are crucial link in a vehicle's suspension connecting the suspension to a vehicle's subframe. These pieces are usually hinged to allow for suspension to travel and articulate as the vehicle rides over obstructions in the road and while the vehicle turns. Many vehicles such as those with independent suspensions have multiple links and feature several connection points and arms to offer better ride quality and comfort.
As bushings and joints in a control arm begin to wear you may notice a looseness feel in your suspension. And while many arms have replaceable and serviceable individual components, many still require the replacement of the entire arm.
Suspension Control Arm Kit Failure Symptoms
Play
in suspension joints where these arms meet the subframe and/or knuckle
Buckling
noise emanating from the suspension
Uneven
tire wear
Inability
to properly align vehicle
Shutter
or vibration coming from the steering wheel at highway speed
Wandering
or pulling sensation from side to side felt on the steering wheel
Diagram ref No 3, 4, 5, 6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT993.1
99333104503
99333104501
99333104502
99333104101
99333104102
99333104300
99333104301
99333104700
99333104702
99333104703
99333307301
99333307302
99333307303
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Rear V shape wishbone Porsche 993 1994-97 (OE No. 99333104102 / 99333104202) (99333104102/3)
1 x Rear V shape wishbone Porsche 993 1994-97 (OE No. 99333104102 / 99333104202) (99333104202/3)
2 x Control arm lower, Rear. Porsche 993 Ref: 99333104300 , 99333104301 (99333104301/1)
2 x Control arm upper, Rear. Porsche 993 (99333104503/1)
2 x Control arm upper, Rear. Porsche 993 (99333104703/2)
2 x Drop link, Rear. Porsche 993 1994-97 C2/C4/ M030 / 993TT (99333307304/1)
Vehicle Group
Vehicle Group
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
£1,206.30 inc. VAT
Now £1,109.66 inc. VAT
Due In 11 Days
Shock absorber upper strut mounts Front. Porsche 991 / 981 Boxster/Cayman / 982 (718) Boxster/Cayman
99134301502/1KIT
Product Information
When the strut mount’s bushing wears out, it often causes clunking noises over bumps and reduces damping, resulting in a harsh ride. A failing strut bearing, on the other hand, can cause binding and resistance during steering. Because replacing either component requires removing and disassembling the strut assembly, it’s common practice to replace both at the same time.
Fits:
Porsche 991.1 C2 / C2S / C4 / C4S - 2012 to 2016
Porsche 991.2 C2 / C2S / C4 / C4S - 2016 to 2019
Porsche 991 Turbo - 2014 to 2019
Porsche 981 Boxster - 2012 to 2016
Porsche 982 (718) Boxster - 2017>>
Porsche 981C Cayman - 2014 to 2016
Porsche 982C Cayman - 2017>>
Key Features:
High-quality strut mounts and bearings for precise fit and performance. Restores suspension function and handling
Symptoms of a Worn Strut Mount or Bearing:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134301502
The product you are viewing cross references to these numbers
Product Information
Shock absorber upper strut mounts, SET OF 2 KIT Front. The strut mount secures the strut to your vehicle’s chassis and supports the coil spring, while a built-in bushing absorbs impacts from the strut piston. Beneath the strut mount sits the strut bearing, allowing smooth movement of the strut with the steering knuckle as your wheels turn.When the strut mount’s bushing wears out, it often causes clunking noises over bumps and reduces damping, resulting in a harsh ride. A failing strut bearing, on the other hand, can cause binding and resistance during steering. Because replacing either component requires removing and disassembling the strut assembly, it’s common practice to replace both at the same time.
Fits:
Porsche 991.1 C2 / C2S / C4 / C4S - 2012 to 2016
Porsche 991.2 C2 / C2S / C4 / C4S - 2016 to 2019
Porsche 991 Turbo - 2014 to 2019
Porsche 981 Boxster - 2012 to 2016
Porsche 982 (718) Boxster - 2017>>
Porsche 981C Cayman - 2014 to 2016
Porsche 982C Cayman - 2017>>
Key Features:
High-quality strut mounts and bearings for precise fit and performance. Restores suspension function and handling
Symptoms of a Worn Strut Mount or Bearing:
- Clunking or knocking noises: Especially over bumps, potholes, or rough roads, caused by movement of a loose strut or spring.
- Increased body roll or bouncing: Reduced damping can make cornering unstable and rides harsh.
- Steering resistance or binding: Typically from a failing strut bearing, affecting smooth wheel movement
Diagram ref no 3, 4 and 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134301502
99134301502
PAF003923
99908444701
99134350103
99134350102
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock absorber upper strut mount Front. Porsche 991 / 981 Boxster/Cayman / 982 (718) Boxster/Cayman (99134301502/1)
2 x Shock absorber upper mount bearing. Porsche 991 / Boxster / Cayman (99134350103/1)
6 x Exhaust hexagon nut. Porsche 996 / 997 (90038000501/1)
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
£453.36 inc. VAT
Now £408.36 inc. VAT
Orderable - 3 to 6 Days
99134312500/1
Product Information
Sold Each.
x2 Required Per Car.
Fits:
Porsche 981 Boxster / Boxster Spyder 2012>>2016
Porsche 981C Cayman 2014>>2016
Porsche 991.1 C2 / C4 /C2S / C4S 2012>>2016
Diagram Ref No 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134312500
The product you are viewing cross references to these numbers
Product Information
Front Shock Absorber Mount Plate.Sold Each.
x2 Required Per Car.
Fits:
Porsche 981 Boxster / Boxster Spyder 2012>>2016
Porsche 981C Cayman 2014>>2016
Porsche 991.1 C2 / C4 /C2S / C4S 2012>>2016
Diagram Ref No 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134312500
99134312500
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
£26.95 inc. VAT
Now £24.25 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99610418059/3.1KIT
Product Information
Fits:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610418059
The product you are viewing cross references to these numbers
Product Information
Cylinder head bolt long & head gaskets Porsche 996 3.4L Engine Cylinder Head Gasket Kit
The cylinder head gasket is a critical component that seals the cylinder head to the engine block. It serves several key functions, It seals the combustion chamber, ensuring proper compression for efficient engine performance. It prevents coolant and engine oil from mixing by sealing the fluid passages between the cylinder head and engine block.
Signs of Cylinder Head Gasket Failure
A failing head gasket can lead to serious engine problems. Common symptoms include:
- Engine overheating
- Low cylinder compression
- External coolant or oil leaks
- White smoke from the exhaust
- Bubbles in the radiator or coolant reservoir
- Milky or white-colored engine oil
Fits:
Porsche 996 C2 3.4L 1997-08/01
Porsche 996 C4 3.4L 1997-08/01
Click 'Zoom in' for large parts diagram
Diagram ref no 19 & 20.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99610418059
99610418056
99610418057
99610418058
99610418059
99610427006
99610427005
99610427004
99610426901
99610426900
99610418053
99610418055
99610418054
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
24 x Cylinder head bolt long. Porsche Boxster / Cayman / 996 / 997 (99610418059/3)
1 x Engine head gasket. Porsche 996 >>2001 (99610427006/1)
1 x Engine head gasket. Porsche 996 >>2001 (99610426901/1)
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
£230.70 inc. VAT
Now £220.70 inc. VAT
Due In 23 Days
9P1513353/1KIT
Product Information
Fits:
Porsche 991.1 2012-16
Porsche 991.2 20167-18
Porsche 991 Turbo 2014-20 (not GT2 RS)
Porsche 991 GT3 >>2017
Porsche 992.1 Carrera 2019>>
Porsche 992 Turbo 2020>>
Porsche 992 GT3-3 2018>> incl. Speedster
Option code:
(352) Electronic damper control for PASM and PDCC
(472) PASM electronic damper control
Click 'Zoom in' for large parts diagram.
Diagram ref no 3 & 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1513353
The product you are viewing cross references to these numbers
Product Information
Rear upper shock absorber mount kit (set of 2)Fits:
Porsche 991.1 2012-16
Porsche 991.2 20167-18
Porsche 991 Turbo 2014-20 (not GT2 RS)
Porsche 991 GT3 >>2017
Porsche 992.1 Carrera 2019>>
Porsche 992 Turbo 2020>>
Porsche 992 GT3-3 2018>> incl. Speedster
Option code:
(352) Electronic damper control for PASM and PDCC
(472) PASM electronic damper control
Click 'Zoom in' for large parts diagram.
Diagram ref no 3 & 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1513353
9P1513353
99133316101
99133316100
99133369101
99133369100
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Rear upper shock absorber mount. Porsche 991 / 992 (9P1513353/1)
2 x Rear shock top mount insert. Porsche 991 (99133369101)
Vehicle Group
Vehicle Group
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Speedster 4.0L 2019-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.1 GT3 4.0L / 992 S/T 4.0L 2021-24
- Porsche 992.1 (911) Sport Classic 3.8L 2023
£403.08 inc. VAT
Now £378.08 inc. VAT
Due In 12 Days
95834933780/1KIT
Product Information
Porsche 958 Cayenne 3.6ltr V6 - 2014 to 2017
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834933780
The product you are viewing cross references to these numbers
Product Information
Differential mounting bush kit, 3 Parts (OE Ref: 2 x 95834933780 & 1 x
95834933790 ) The differential bushings secure the differential to the subframe. Over time, the rubber material naturally oxidizes, stretches, and deteriorates due to driving conditions and environmental exposure. As the bushings wear, the differential is allowed to shift, which can lead to clunking during acceleration, vibrations throughout the vehicle, and premature wear of the driveshaft and differential bearings.
Our Differential Bushing Kit provides all three rear differential bushings along with new mounting hardware, delivering a complete solution that restores your Cayenne’s performance, reliability, and safety.
Fits:Porsche 958 Cayenne 3.6ltr V6 - 2014 to 2017
Porsche 958 Cayenne 4.8ltr V8 - 2014 to 2017
Porsche 958 Cayenne Diesel 3.0ltr - 2014 to 2017
Mounting bush for front differential to subframe.
Diagram ref no 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834933780
95834933780
95834933790
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Front differential mounting bush FRONT. Porsche 958 Cayenne (95834933780/1)
1 x Front differential mounting bush Rear. Porsche 958 Cayenne (95834933790/1)
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
£52.50 inc. VAT
Now £47.25 inc. VAT
In Stock - 24 Hour Dispatch
99733310501/1KIT
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733310501
The product you are viewing cross references to these numbers
Product Information
Shock absorber additional springs. fits the FRONT cars with sport shock I475 / I030. This includes 2 x additional springs as one is required for each shock absorber. This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the PASM electronic damper control (with sport shock I475 / I030). Fits:
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
This acts as a progressive load-bearing element, cushioning the suspension when the strut nears full compression. It helps prevent harsh bottoming-out, protecting both the strut and chassis from damage during aggressive driving or over bumps. These components maintain ride quality and handling performance, especially under heavy loading or spirited cornering, keeping the suspension linear and controlled.
Common Issues & Considerations Wear or Deterioration: Over time, the rubber can compress, crack, or lose elasticity, diminishing its effectiveness. This can lead to harsher suspension impacts at full compression. Noise or Harsh Feedback: A worn or hardened bump stop can transmit noise or impacts through the cabin, particularly over rough roads or speed bumps. Sport vs. Standard Suspension: These parts are specific to Sport chassis models. Non-sport setups may not have the same bump stops or use different part numbers, so swapping or replacing must be done accordingly.
Click 'Zoom in' for large parts diagram. Diagram ref no 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99733310501
99733310501
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock absorber bump stop cars with sport shock I475 / I030 Porsche 997 (99733310501/1)
Vehicle Group
Vehicle Group
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche 997 MKII GT2 RS 2011-13
£38.00 inc. VAT
Now £34.20 inc. VAT
In Stock - 24 Hour Dispatch
021101267/1
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
021101267
The product you are viewing cross references to these numbers
Product Information
Cover oil temperature sensor.
Fits:
Porsche 914 - 1970 to 1976
Cover for temperature sensor for oil, M10x1mm
Diagram ref no 49
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
021101267
021101267
039101267
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 914 (1970-1976)
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information