OE Match
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 4,000 individual part numbers, and over 8,700 OE cross-references catalogued, and are constantly developing new lines.
OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.

Kit includes 2 x Lambda oxygen sensor - can be used in any position, before and after catalytic converter
Fits
Porsche 986 Boxster - 1997 to 2002
Porsche 986 Boxster S - 1997 to 2002
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Drivability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT10
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02

Kit includes 4 x Lambda oxygen sensor (before and after catalytic converter)
Fits
Porsche 986 Boxster - 1997 to 2002
Porsche 986 Boxster S - 1997 to 2002
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Drivability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT8
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02

Kit includes 2 x Lambda Oxygen Sensors (after catalytic converter)
Fits:
Porsche 996 Carrera 2 / Carrera 4 - 2002 to 2005
*Cars with M661 stricter emission control concept
Porsche 996 GT3 MKII 2004 to 2005
Porsche 997.1 Carrera 2 / Carrera 4 - 2005
Porsche 997.1 Carrera 2S / Carrera 4S - 2005
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Drivability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT5
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>

Kit includes 2 x Lambda Oxygen Sensors (before catalytic converter)
Fits:
Porsche 996 Carrera 2 / Carrera 4 - 2002 to 2005
*Cars with M661 stricter emission control concept
Porsche 996 GT3 MKII - 2004 to 2005
Porsche 997.1 Carrera 2 / Carrera 4 - 2005
Porsche 997.1 Carrera 2S / Carrera 4S - 2005
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Drivability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 31
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT4
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>

Kit includes 4 x Lambda Oxygen Sensors (2 x before and 2 x after catalytic converter)
Fits:
Porsche 996 Carrera 2 / Carrera 4 - 2002 to 2005
*Cars with M661 stricter emission control concept
Porsche 996 GT3 MKII - 2004 to 2005
Porsche 997.1 Carrera 2 / Carrera 4 - 2005
Porsche 997.1 Carrera 2S / Carrera 4S - 2005
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Drivability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 30 and 31
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT2
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>

Sold each - 2 required per car
Fits:
Porsche 914 - 1970 to 1976
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
021109339
The product you are viewing cross references to these numbers
- Porsche 914 (1970-1976)

Sold individually; x12 required per engine.
Fits:
Porsche 993 Carrera 1994-98
Porsche 993 Carrera RS 1995-98
Porsche 993 Turbo / S 1995-98
Porsche 993 GT2 1995-98
Diagram ref. 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99310411102
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97

Fits:
Porsche 911 - 1965 to 1968
Diagram ref no 53
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90174155300
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)

Fits:
Porsche 911 2.0ltr - 1965 to 1968
Porsche 912 - 1965 to 1968
This listing refers specifically to the upper bracket. For reference, the part number for the lower bracket is 90134773401 (No. 47 in the diagram). Additionally, there is a sealing ring located in the middle with part number 90134773600 (No. 46 in the diagram).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134773301
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)

Fits:
Porsche 911 - 1984 to 1989
This crankshaft sensor is designed for Porsche 911 G models produced between 1984 and 1989. It serves as a pulse generator, transmitting engine speed data to the DME, and is a frequent culprit when the engine experiences irregular performance.
Identified by the Bosch number ending in 005, this sensor was installed in pairs within the vehicle. A reliable and precise pulse generator is crucial for optimal engine electronics performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91160621502
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)

Kit includes - Ignition coil x 4
Fits:
Porsche 718 (982) Boxster 2.0L 2017>>
Porsche 718C (982C) Cayman 2.0L 2017>>
Porsche 718C (982C) Cayman 2.5L 2017>>
Porsche 718 (982) Boxster 2.5L 2017>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0PB905093F
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)


Fits:
Porsche 993 - 1994 to 1997
Porsche 993 turbo - 1994 to 1997
Kit includes:
2 x Lower wishbone
6 x Control arms
2 x Suspension side member bush kit
2 x Rear anti roll bar drop link
Diagram ref No 3, 4, 5, 6 and bushes for number 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SUSPENSIONKIT993
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97

Kit includes - Ignition coil x 6
Fits:
Porsche 991.2 Carrera 2017>>
Porsche 992.1 3.0L 2019>>
Porsche 992.1 turbo 2019>>
Porsche 992.2 Carrera 2 3.0ltr 2024>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0PB905093F
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 2 3.0L Cabriolet

Fits:
Porsche 924S 2.5L 1986-88
Diagram Ref No 13.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94460620100
The product you are viewing cross references to these numbers
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
Fits:
Porsche 911S 2.2ltr - 1970 to 1971
Please Note
The GRP air duct for the engine cover of the Porsche 911 2.2 S. Made from high-quality glass fiber reinforced plastic (GRP), it combines robustness with a low weight which contributes to improved overall vehicle performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110603201
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Air Cleaner for counties with dust-laden air.

Fits:
Porsche 955 Cayenne MKI & 957 Cayenne MKII
Optimize your Porsche 955 MKI Cayenne / 957 MKII Cayenne with our premium air filter, designed to deliver top-notch performance and superior engine protection. Crafted specifically for these Porsche models, our air filter enhances airflow, promoting optimal combustion and fuel efficiency. Say goodbye to dust and contaminants that can compromise your engine's lifespan. Elevate your driving experience with improved horsepower and acceleration. Upgrade to our precision-engineered air filter for the Porsche 955 MKI Cayenne / 957 MKII Cayenne – the perfect blend of performance and protection. Trust in our product to keep your luxury vehicle running at its peak, and take the first step towards a smoother, more efficient ride.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95511013110
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne Turbo 4.5L 2003>>
- Porsche Cayenne Turbo S 4.5L 2006>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
- Porsche Cayenne Turbo / Turbo S 4.8L 2007>>