OE Match
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 4,000 individual part numbers, and over 8,700 OE cross-references catalogued, and are constantly developing new lines.
OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.
Sold each
Fits:
Porsche 964 - 1990 to 1994 (Front)
Porsche 993 - 1994 to 1998 (Rear)
Porsche 928 - 1978 to 1986 (Front or Rear)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99350501900
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86

Fits:
Porsche 911 - 1963 to 1973
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90150153020
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 970.1 Panamera - 2010 to 2013
Porsche 970.2 Panamera - 2014 to 2016
For cars with Option Codes
I350 - Air suspension
I351 - Air suspension with PDCC
I354 - Air suspension and PASM Comfort
I355 - Air suspension and PASM, PDCC Comfort
Please Note:
To change suspension compressor is not simple DIY replacement job. To complete the process you need access to PIWIS software and Nitrogen grade 5 dry gas fill up station. If you just replace the compressor and don't follow the correct procedures you will damage the new unit.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97035815128
The product you are viewing cross references to these numbers
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L
- Porsche Panamera S Hybrid V6 3.0L
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera 4 V6 3.6L 4WD (310Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD (420Hp)
- Porsche Panamera S V6 Turbo 3.0L 2WD Executive
- Porsche Panamera 4S V6 Turbo 3.0L 4WD (420Hp)
- Porsche Panamera 4S V6 Turbo 3.0L 4WD Executive
- Porsche Panamera GTS V8 4.8L 4WD (440Hp)
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Diesel V6 3.0L (250Hp)
- Porsche Panamera S E-Hybrid V6 3.0L (416Hp)

Fits:
Porsche 95B Macan 2.0ltr - 2014 to 2018
For cars with Option Codes
7L4 - Start/Stop "last mode" with recuperation
7L8 - Start/Stop "default on" with recuperation
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
06H911021D
The product you are viewing cross references to these numbers
- Porsche Macan Petrol 2.0L 237Bhp
Fits:
Porsche 911 - 1965 to 1969 (F 030 0255>>)
Porsche 911 - 1970 to 1973
Kit Includes:
1 x Fuel flap release cable
1 x Fuel flap release cable knob
1 x Fuel flap latch screw
1 x Connecting tube
1 x Rubber washer
1 x Rubber grommet
Diagram Ref no 10, 11, 12, 13, 14 and 15
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90150431721
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

2 sets required per car
Fits:
Porsche 911 - 1969 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912E - 1976
Porsche 914-6 - 1970 to 1976
Kit Includes:
2 x Taper roller bearing (inner and outer)
1 x Wheel bearing radial seal
1 x Wheel bearing spacer ring
1 x Wheel bearing spacer ring O-ring
Diagram ref no 23, 24, 29, 27 and 28
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WBEARINGKIT03
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 914 (1970-1976)
- Porsche 912E 4CYL 1976

Kit includes valve spring x 8
Fits:
Porsche 356B / 356C - 1960 to 1965
Porsche 912 - 1966 to 1969
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610543203
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 955 Cayenne S - 2003 to 2006
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810721503
The product you are viewing cross references to these numbers
- Porsche Cayenne S 4.5L V8 2003>>

Kit includes 12 x hydraulic tappets
Fits:
Porsche 993 Carrera - 1994 to 1998
Porsche 993 Carrera RS - 1994 to 1998
Diagram Ref No 25
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99310514107
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97

Kit includes 2 x Lambda oxygen sensor
Fits:
Porsche 991.1 Carrera 2 / Carrera 4 - 2012 to 2016
Porsche 991.1 S Carrera 2S / Carrera 4S - 2012 to 2016
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
Driveability problems, such as engine surging or hesitation.
High hydrocarbon emissions, failing an emissions inspection.
The engine warning light may be on or service flag displayed.
The ecu/computer stores a mixture-related fault code.
When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
Test and/or replace every 30,000 miles.
Perform periodic emission checks.
Watch for service light.
Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 21
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT22
The product you are viewing cross references to these numbers
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)

Kit includes 4 x Lambda oxygen sensor ( 2 x before and 2 x after catalytic converter)
Fits:
Porsche 997.1 turbo - 2007 to 2009
Porsche 997.1 GT2 - 2008 to 2009
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 32 and 33
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT20
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>
Fits:
Porsche 957 Cayenne S / GTS 4.8L 2009 - 2010
Diagram ref no 13 (Cyl 1-4) or 14 (Cyl 5-8)
NOTE: This part is compatible only with 957 Cayenne S/GTS models produced from the 2009 model year onwards. It is not compatible with earlier models equipped with the silver AOS.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94810723
The product you are viewing cross references to these numbers
- Porsche Cayenne S/GTS 4.8L 2007>>

Kit includes 4 x Lambda oxygen sensor (before and after catalytic converter)
Fits:
Porsche 997.2 Carrera 2 / Carrera 4 3.6ltr - 2009 to 2012
Porsche 997.2 Carrera 2S / Carrera 4S 3.6ltr - 2009 to 2012
Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance/Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 6 and 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT18
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>

Kit includes 2 x Lambda oxygen sensor (after catalytic converter)
Fits
Porsche 997.1 Carrera 2 / Carrera 4 - 2006 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S - 2006 to 2008
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT15
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>

Kit includes 2 x Lambda oxygen sensor (before catalytic converter)
Fits
Porsche 997.1 Carrera 2 / Carrera 4 - 2006 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S - 2006 to 2008
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 31
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT14
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>

Kit includes 4 x Lambda oxygen sensor (before and after catalytic converter)
Fits
Porsche 997.1 Carrera 2 / Carrera 4 - 2006 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S - 2006 to 2008
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.
Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail
Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.
Diagram ref no 30 and 31
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
LAMBDAKIT12
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>