Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
About OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
COOLTANKKIT997.2
Product Information
This kit includes a direct-fit coolant expansion tank, pressure cap, long-life red antifreeze, and a coolant level sensor, giving you the essential components needed to refresh the coolant reservoir side of the engine cooling system with parts that match the original equipment specifications.
Fits:
Porsche 996 3.6L C2 / C4 / C4S 2001 - 2005
Porsche 996 Turbo 2001 - 2005
Porsche 996 GT2 2001 - 2005
Porsche 996 GT3 MKII / GT3 RS 2001 - 2005
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Diagram ref no 1, 2, 3, 4, 5, 13, 14, 17.
The core expansion tank included - part 99610615704 - is designed for Porsche 911 models (996 & early-mid 997 generations) from roughly 2001 to 2012 family vehicles when equipped with the matching cooling setup. It is precision-moulded for proper hose and sensor connections. Always double-check fitment with your vehicle’s year, model and engine before ordering.
The Engine Coolant Expansion Tank Kit brings together the key components responsible for reliable coolant overflow control, pressure sealing, fluid protection, and level monitoring:
• 99610615704/1 × 1 – OE Match Coolant Expansion Tank incl. Cap (99610644704): Precision-matched coolant reservoir engineered to replicate the original Porsche expansion tank for the 911 (996/997) cooling system. Correct pressure cap that seals the expansion tank and helps maintain proper system pressure to optimise coolant performance.
• 00004330194 × 5 – Comma Antifreeze 1 L Red Concentrate (5-Year Protection): High-quality coolant concentrate designed for long life protection against corrosion, freeze, and boil when mixed with distilled water.
• 99764150300/1 × 1 – OE Match Coolant Level Sensor: that fits into the expansion tank, monitoring coolant level and triggering alerts if it falls below safe thresholds.
Together, these parts provide a comprehensive OE Match solution for maintaining or overhauling your cooling system’s expansion reservoir assembly.
Coolant expansion tanks can become brittle and crack over time due to heat cycling, stringently affecting coolant containment and pressure regulation. Old or degraded antifreeze also loses protective properties against corrosion and thermal stress. A failing level sensor can result in inaccurate or missing low-coolant warnings, increasing risk of overheating and engine damage. By replacing all key components with OE Match quality parts, you help maintain proper cooling function, consistent performance, and long-term reliability.
Replace this kit when you notice any of the following:
• Cracks, leaks or deformation in the expansion tank
• Pressure cap no longer seals or maintains system pressure
• Coolant appears contaminated, sludgy or past its service life
• Frequent coolant top-ups are required without visible external leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT997.2
The product you are viewing cross references to these numbers
Product Information
Engine coolant expansion tank kit with sensor.This kit includes a direct-fit coolant expansion tank, pressure cap, long-life red antifreeze, and a coolant level sensor, giving you the essential components needed to refresh the coolant reservoir side of the engine cooling system with parts that match the original equipment specifications.
Fits:
Porsche 996 3.6L C2 / C4 / C4S 2001 - 2005
Porsche 996 Turbo 2001 - 2005
Porsche 996 GT2 2001 - 2005
Porsche 996 GT3 MKII / GT3 RS 2001 - 2005
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Diagram ref no 1, 2, 3, 4, 5, 13, 14, 17.
The core expansion tank included - part 99610615704 - is designed for Porsche 911 models (996 & early-mid 997 generations) from roughly 2001 to 2012 family vehicles when equipped with the matching cooling setup. It is precision-moulded for proper hose and sensor connections. Always double-check fitment with your vehicle’s year, model and engine before ordering.
The Engine Coolant Expansion Tank Kit brings together the key components responsible for reliable coolant overflow control, pressure sealing, fluid protection, and level monitoring:
• 99610615704/1 × 1 – OE Match Coolant Expansion Tank incl. Cap (99610644704): Precision-matched coolant reservoir engineered to replicate the original Porsche expansion tank for the 911 (996/997) cooling system. Correct pressure cap that seals the expansion tank and helps maintain proper system pressure to optimise coolant performance.
• 00004330194 × 5 – Comma Antifreeze 1 L Red Concentrate (5-Year Protection): High-quality coolant concentrate designed for long life protection against corrosion, freeze, and boil when mixed with distilled water.
• 99764150300/1 × 1 – OE Match Coolant Level Sensor: that fits into the expansion tank, monitoring coolant level and triggering alerts if it falls below safe thresholds.
Together, these parts provide a comprehensive OE Match solution for maintaining or overhauling your cooling system’s expansion reservoir assembly.
Coolant expansion tanks can become brittle and crack over time due to heat cycling, stringently affecting coolant containment and pressure regulation. Old or degraded antifreeze also loses protective properties against corrosion and thermal stress. A failing level sensor can result in inaccurate or missing low-coolant warnings, increasing risk of overheating and engine damage. By replacing all key components with OE Match quality parts, you help maintain proper cooling function, consistent performance, and long-term reliability.
Replace this kit when you notice any of the following:
• Cracks, leaks or deformation in the expansion tank
• Pressure cap no longer seals or maintains system pressure
• Coolant appears contaminated, sludgy or past its service life
• Frequent coolant top-ups are required without visible external leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT997.2
99610615703
99610615704
99610615700
99610615701
99610615702
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Coolant bottle. Porsche 996 2001 >> / 997.1 / 997.2 (99610615704/2)
1 x Coolant bottle level sensor. Porsche Boxster 986 / Boxster 987 / 996 / 997 (99764150300/1)
5 x Antifreeze 1Ltr Concentrate Bottle 5 year Red (00004330194)
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
€158.52 inc. VAT
Now €142.67 inc. VAT
In Stock - 24 Hour Dispatch
COOLTANKKIT997.1
Product Information
This kit includes a direct-fit coolant expansion tank, pressure cap, long-life red antifreeze, and a coolant level sensor, giving you the essential components needed to refresh the coolant reservoir side of the engine cooling system with parts that match the original equipment specifications.
Fits:
Porsche 996 3.6L C2 / C4 / C4S 2001 - 2005
Porsche 996 Turbo 2001 - 2005
Porsche 996 GT2 2001 - 2005
Porsche 996 GT3 MKII / GT3 RS 2001 - 2005
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Diagram ref no 1, 3, 4, 5, 13, 14, 17.
This OE Match kit is designed for Porsche vehicles that use part number 99610615704 for their coolant expansion reservoir, commonly fitting Porsche 911 models (996 & early 997 series). Always check your vehicle’s specific model year and engine to confirm fitment before purchasing.
This Engine Coolant Expansion Tank Kit combines the essential OE Match components needed for proper cooling system service:
• 99610615704/1 × 1 – OE Match Coolant Expansion Tank incl. Cap (99610644704): Precision-matched coolant reservoir engineered to replicate the original Porsche expansion tank for the 911 (996/997) cooling system. Correct pressure cap that seals the expansion tank and helps maintain proper system pressure to optimise coolant performance.
• 00004330194 × 5 – Comma Antifreeze 1 L Red Concentrate (5-Year Protection): High-quality coolant concentrate designed for long life protection against corrosion, freeze, and boil when mixed with distilled water.
Together, these components ensure your cooling system is refreshed with quality parts that closely match the original performance and characteristics.
This kit helps restore your cooling system’s ability to manage the expansion and contraction of engine coolant as temperature fluctuates. The expansion tank safely captures excess coolant, the pressure cap maintains system integrity and boiling point, and the long-life antifreeze protects internal components from corrosion, overheat or freeze damage.
Over time, the original coolant expansion tank and cap can become brittle, discoloured, cracked or weakened due to repeated heat cycles and coolant exposure. A failing tank may allow coolant loss or air entry into the system, while old or depleted coolant loses protective properties. An OE Match tank and cap restore proper coolant containment and pressure control - and replenishing the coolant with high-quality antifreeze extends protection against corrosion and temperature extremes for years.
Replace this kit when you notice any of the following:
• Cracks, leaks or deformation in the expansion tank
• Pressure cap no longer seals or maintains system pressure
• Coolant appears contaminated, sludgy or past its service life
• Frequent coolant top-ups are required without visible external leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT997.1
The product you are viewing cross references to these numbers
Product Information
Engine coolant expansion tank kit.This kit includes a direct-fit coolant expansion tank, pressure cap, long-life red antifreeze, and a coolant level sensor, giving you the essential components needed to refresh the coolant reservoir side of the engine cooling system with parts that match the original equipment specifications.
Fits:
Porsche 996 3.6L C2 / C4 / C4S 2001 - 2005
Porsche 996 Turbo 2001 - 2005
Porsche 996 GT2 2001 - 2005
Porsche 996 GT3 MKII / GT3 RS 2001 - 2005
Porsche 997.1 2005 - 2008 all models
Porsche 997.2 2009 - 2012 all models
Diagram ref no 1, 3, 4, 5, 13, 14, 17.
This OE Match kit is designed for Porsche vehicles that use part number 99610615704 for their coolant expansion reservoir, commonly fitting Porsche 911 models (996 & early 997 series). Always check your vehicle’s specific model year and engine to confirm fitment before purchasing.
This Engine Coolant Expansion Tank Kit combines the essential OE Match components needed for proper cooling system service:
• 99610615704/1 × 1 – OE Match Coolant Expansion Tank incl. Cap (99610644704): Precision-matched coolant reservoir engineered to replicate the original Porsche expansion tank for the 911 (996/997) cooling system. Correct pressure cap that seals the expansion tank and helps maintain proper system pressure to optimise coolant performance.
• 00004330194 × 5 – Comma Antifreeze 1 L Red Concentrate (5-Year Protection): High-quality coolant concentrate designed for long life protection against corrosion, freeze, and boil when mixed with distilled water.
Together, these components ensure your cooling system is refreshed with quality parts that closely match the original performance and characteristics.
This kit helps restore your cooling system’s ability to manage the expansion and contraction of engine coolant as temperature fluctuates. The expansion tank safely captures excess coolant, the pressure cap maintains system integrity and boiling point, and the long-life antifreeze protects internal components from corrosion, overheat or freeze damage.
Over time, the original coolant expansion tank and cap can become brittle, discoloured, cracked or weakened due to repeated heat cycles and coolant exposure. A failing tank may allow coolant loss or air entry into the system, while old or depleted coolant loses protective properties. An OE Match tank and cap restore proper coolant containment and pressure control - and replenishing the coolant with high-quality antifreeze extends protection against corrosion and temperature extremes for years.
Replace this kit when you notice any of the following:
• Cracks, leaks or deformation in the expansion tank
• Pressure cap no longer seals or maintains system pressure
• Coolant appears contaminated, sludgy or past its service life
• Frequent coolant top-ups are required without visible external leaks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT997.1
99610615703
99610615704
99610615700
99610615701
99610615702
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Coolant bottle. Porsche 996 2001 >> / 997.1 / 997.2 (99610615704/2)
5 x Antifreeze 1Ltr Concentrate Bottle 5 year Red (00004330194)
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 2010-11
- Porsche 997 MKII Turbo 2010-13
€132.78 inc. VAT
Now €119.50 inc. VAT
In Stock - 24 Hour Dispatch
.jpg?width=197&height=148&format=webp "Washer Pump Hose Line. Porsche 981 / 982 / Boxster / Cayman / 991.1 / 991.2 2012>> - 99162866900")
99162866900/1
Product Information
This hose ensures proper fluid delivery and reliable operation of the washer system, even under temperature fluctuations and repeated use. Made from durable automotive-grade material that resists cracking, collapsing, and chemical degradation, it provides long-lasting performance as part of the vehicle’s washer plumbing.
What This Product Does:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99162866900
The product you are viewing cross references to these numbers
Product Information
Washer Pump Hose Line.The Washer Pump Hose Line is a washer system component specifically designed for select Porsche 981 / 982 / 991.1 / 991.2 models. This hose line connects the washer pump to the washer fluid reservoir and the windscreen (and/or rear window) jets, allowing washer fluid to flow efficiently throughout the system whenever activated.
Fits:
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Boxster Spyder 718 4.0L (420 Bhp)
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp)
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
- Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
- Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S 3.0L (420 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
This hose ensures proper fluid delivery and reliable operation of the washer system, even under temperature fluctuations and repeated use. Made from durable automotive-grade material that resists cracking, collapsing, and chemical degradation, it provides long-lasting performance as part of the vehicle’s washer plumbing.
What This Product Does:
- Provides a fluid path from the washer pump to the windscreen washer jets
- Ensures consistent washer fluid flow when the pump is activated
- Resists kinking, collapsing, and heat exposure under the bonnet
- Works as part of the complete washer system (pump, reservoir, jets, tubing)
- No fluid spray from the windscreen jets when the washer is activated
- Weak or intermittent spray — fluid flow is reduced or inconsistent
- Visible fluid leaks around the hose, pump, or under the vehicle
- Fluid loss — reservoir empties quickly without visible spray
- Collapsed or brittle hose material visible on inspection
- Unusual noises from the washer pump (indicating it’s running dry)
- A functioning windscreen washer system is essential for maintaining clear vision in rain, snow, dust, and road debris conditions. Replacing a faulty hose restores effective spray and improves driving safety.
- Running the washer pump with a blocked or leaking hose can lead to premature pump failure — a more expensive component to replace than the hose itself.
- This hose line is engineered to withstand heat, movement, and chemical exposure. A proper replacement helps maintain washer system reliability over the long term.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99162866900
99162866900
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Boxster 981 Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
- Porsche Boxster Spyder / Sypder RS 718 4.0L 01/2019>>
- Porsche Boxster 25 Years 718 4.0L Manual (400 Bhp) 01/2020>>
- Porsche Boxster 25 Years 718 4.0L PDK (400 Bhp) 01/2020>>
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
- Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
- Porsche 991.1 R 4.0L (500 Bhp) 2016
- Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
- Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Turbo Cabriolet 3.8L (540 Bhp) 2016-19
- Porsche 991.2 Turbo S Cabriolet 3.8L (580 Bhp) 2016-19
- Porsche 991.2 Speedster 4.0L (510Bhp) 2019
- Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
- Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
€19.48 inc. VAT
Now €17.53 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95562813000/1
Product Information
What This Product Does:
Symptoms Of Washer Hose Failure:
Why Replacement Matters:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95562813000
The product you are viewing cross references to these numbers
Product Information
Windscreen Washer Hose.The Windscreen Washer Hose is a component designed to ensure reliable delivery of washer fluid to the windscreen washer jets. Used on Porsche models such as the Cayenne 955, 957 and 958, this hose forms a critical part of the washer system, carrying fluid from the reservoir to the spray nozzles to keep the windscreen clean and clear.
The hose is engineered to withstand temperature extremes, engine-bay heat, and constant exposure to washer fluid without becoming brittle or leaking. Over time, original hoses can crack, harden, or split, leading to washer fluid loss and poor spray performance. Replacing a worn hose restores full washer system functionality and prevents leaks.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
What This Product Does:
- Transports washer fluid from the reservoir to the washer jets
- Ensures consistent fluid delivery so your windscreen stays clean
- Works under varying temperatures and pressures in the engine bay
- Intended to be flexible yet durable — routed through the engine compartment and along bodywork
Symptoms Of Washer Hose Failure:
- No fluid spray from windscreen washer jets
- Fluid spraying only intermittently or weakly
- Fluid leaking under the hood or along the hose runs
- Puddles of washer fluid under the car after operating the washer
- Hose that appears dry-rotten, cracked, split, or collapsed
- Washer fluid reservoir appears to drain quickly
- Older hoses may become brittle, kinked, or deteriorated
Why Replacement Matters:
- A functioning washer system is critical for maintaining a clear windscreen — especially in rain, snow, dust, bugs, and road grime. A broken hose stops fluid flow and reduces driver visibility.
- Leaking washer fluid can drip onto other components, potentially causing corrosion or electrical issues over time.
- Part of proper vehicle upkeep is ensuring all systems (even “small” ones like washer plumbing) are in good working order. A functional washer system contributes to overall vehicle condition and appeal.
- Quality washer hoses must remain flexible in cold conditions; old hoses can become brittle and crack when exposed to freezing temperatures.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95562813000
95562813000
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
€40.56 inc. VAT
Now €36.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
COOLTANKKIT986.2
Product Information
This complete cooling system refresh kit combines essential components - expansion tank, sealing cap, level sensor, and long-life antifreeze — to maintain proper engine cooling performance and fluid management over the long term.
Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2.7L / 3.2L 2005 - 2006 (9625, 9626)
Diagram ref no 8, 11, 26, 27, 34
This OE Match kit is designed for Porsche models that use the 99610614708 expansion tank - such as Porsche Boxster 986 (1997–2004) and Boxster 987 (2005–2006). Always confirm compatibility with the exact model year and engine before purchase.
This engine coolant expansion tank kit includes four key OE Match components that work together to ensure efficient and reliable cooling system operation:
• 99610614708/1 × 1 – OE Match Coolant Expansion Tank: A precision-engineered coolant reservoir designed to replace the original plastic tank on Porsche models like the Boxster (986/987). It stores excess coolant as the engine heats and expands.
• 99610644704/1 × 1 – OE Match Expansion Tank Cap: A direct-fit pressure cap that seals the reservoir and maintains the proper cooling system pressure to optimise thermal performance.
• 00004330194 × 5 – Comma Antifreeze 1 L Red Coolant Concentrate (5-Year Long Life): High-quality antifreeze designed to be mixed with distilled water, offering excellent corrosion protection and extended service life (up to 5 years).
• 99764150300 × 1 – Coolant Level Sensor: OE Match coolant level sensor that monitors the reservoir’s fluid level and enables accurate dashboard warnings to help prevent low-coolant conditions.
This kit addresses both fluid containment and monitoring functions of the coolant system - essential for engine health and performance.
This engine cooling kit enables your vehicle’s cooling system to manage thermal expansion, maintain correct coolant levels, and monitor fluid status effectively. The expansion tank stores overflow coolant when the engine warms up and returns it to the system as it cools down. The pressure cap helps hold system pressure, which elevates boiling point and prevents boil-over. The level sensor ensures accurate monitoring, while the antifreeze helps protect against corrosion and temperature extremes.
Over time, coolant expansion tanks can crack, deform, or develop leaks due to heat cycling and material fatigue. A failing tank or cap can lead to loss of coolant, poor pressure control, and engine overheating. The level sensor can also fail or give inaccurate readings as it ages. Replacing these components with OE Match quality parts restores proper coolant containment, pressure regulation, and fluid level monitoring - helping protect the engine from thermal stress and potentially costly damage.
Replace these parts when you notice any of the following conditions:
• Cracks or visible leaks around the expansion tank
• Discolouration or brittleness of plastic components
• Coolant level fluctuations without visible leaks
• Overheating symptoms or reduced cooling performance
• Routine coolant system maintenance interval is due
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT986.2
The product you are viewing cross references to these numbers
Product Information
Engine coolant expansion tank kit with sensor. This complete cooling system refresh kit combines essential components - expansion tank, sealing cap, level sensor, and long-life antifreeze — to maintain proper engine cooling performance and fluid management over the long term.
Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2.7L / 3.2L 2005 - 2006 (9625, 9626)
Diagram ref no 8, 11, 26, 27, 34
This OE Match kit is designed for Porsche models that use the 99610614708 expansion tank - such as Porsche Boxster 986 (1997–2004) and Boxster 987 (2005–2006). Always confirm compatibility with the exact model year and engine before purchase.
This engine coolant expansion tank kit includes four key OE Match components that work together to ensure efficient and reliable cooling system operation:
• 99610614708/1 × 1 – OE Match Coolant Expansion Tank: A precision-engineered coolant reservoir designed to replace the original plastic tank on Porsche models like the Boxster (986/987). It stores excess coolant as the engine heats and expands.
• 99610644704/1 × 1 – OE Match Expansion Tank Cap: A direct-fit pressure cap that seals the reservoir and maintains the proper cooling system pressure to optimise thermal performance.
• 00004330194 × 5 – Comma Antifreeze 1 L Red Coolant Concentrate (5-Year Long Life): High-quality antifreeze designed to be mixed with distilled water, offering excellent corrosion protection and extended service life (up to 5 years).
• 99764150300 × 1 – Coolant Level Sensor: OE Match coolant level sensor that monitors the reservoir’s fluid level and enables accurate dashboard warnings to help prevent low-coolant conditions.
This kit addresses both fluid containment and monitoring functions of the coolant system - essential for engine health and performance.
This engine cooling kit enables your vehicle’s cooling system to manage thermal expansion, maintain correct coolant levels, and monitor fluid status effectively. The expansion tank stores overflow coolant when the engine warms up and returns it to the system as it cools down. The pressure cap helps hold system pressure, which elevates boiling point and prevents boil-over. The level sensor ensures accurate monitoring, while the antifreeze helps protect against corrosion and temperature extremes.
Over time, coolant expansion tanks can crack, deform, or develop leaks due to heat cycling and material fatigue. A failing tank or cap can lead to loss of coolant, poor pressure control, and engine overheating. The level sensor can also fail or give inaccurate readings as it ages. Replacing these components with OE Match quality parts restores proper coolant containment, pressure regulation, and fluid level monitoring - helping protect the engine from thermal stress and potentially costly damage.
Replace these parts when you notice any of the following conditions:
• Cracks or visible leaks around the expansion tank
• Discolouration or brittleness of plastic components
• Coolant level fluctuations without visible leaks
• Overheating symptoms or reduced cooling performance
• Routine coolant system maintenance interval is due
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT986.2
99610614708
99610614703
99610614704
99610614705
99610614706
99610614707
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Coolant bottle. Porsche Boxster 986 / Boxster 987 1997-06 (99610614708/1)
1 x Coolant reservoir / expansion tank cap. Porsche Boxster 986 / Boxster 987 / Cayman 987C / 996 / 997 (99610644704/1)
1 x Coolant bottle level sensor. Porsche Boxster 986 / Boxster 987 / 996 / 997 (99764150300/1)
5 x Antifreeze 1Ltr Concentrate Bottle 5 year Red (00004330194)
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
€235.09 inc. VAT
Now €211.57 inc. VAT
Due In 17 Days
COOLTANKKIT986.1
Product Information
The kit combines a coolant expansion tank, a pressure cap, and long-life antifreeze concentrate to deliver a complete coolant system refresh.
Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2.7L / 3.2L 2005 - 2006 (9625, 9626)
Diagram ref no 8, 11, 26, 27
This OE Match kit is engineered for Porsche vehicles that utilise 99610614708 style expansion tanks - most commonly fitting Porsche Boxster 986 (1997-2004) and 987 (2005-2006) models. Always verify fitment with your specific year, engine and chassis before ordering.
The engine coolant expansion tank kit includes:
• 99610614708/1 × 1 – OE Match Coolant Expansion Tank: Precisely manufactured replacement reservoir designed to match the original Porsche part used on Boxster models. It collects excess coolant as it expands under heat and releases it back into the system as it cools down.
• 99610644704/1 × 1 – OE Match Expansion Tank Cap: A direct-fit cap that seals the coolant reservoir and helps maintain proper pressure in the cooling system, aiding heat control and preventing coolant loss.
• 00004330194 × 5 – Comma Antifreeze Coolant (1 L Red, 5-Year Concentrate): Premium antifreeze concentrated coolant that, when mixed correctly with water, delivers long-lasting protection against freezing, boiling, and corrosion.
This kit brings together all the primary components you need when servicing or refreshing the coolant expansion side of your engine’s cooling system.
The expansion tank accepts expanding coolant from the radiator and engine as temperatures rise, storing it safely and helping maintain correct coolant levels. The cap seals the system and maintains the right amount of pressure, allowing the cooling system to function efficiently. The antifreeze provided offers long-term protection against corrosion, freezing and overheating - crucial to preserving engine health and reducing wear.
Over time, the original plastic tank can become brittle or crack due to heat cycling and age, which may lead to leaks, coolant loss, or air infiltration that disrupts coolant circulation. A failing pressure cap can no longer maintain correct system pressure, reducing cooling efficiency. Replacing these components with OE Match parts helps restore reliable coolant containment and pressure stability - helping prevent costly overheating and engine damage.
Replace these parts when you notice any of the following conditions:
• Cracks or visible leaks around the expansion tank
• Discolouration or brittleness of plastic components
• Coolant level fluctuations without visible leaks
• Overheating symptoms or reduced cooling performance
• Routine coolant system maintenance interval is due
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT986.1
The product you are viewing cross references to these numbers
Product Information
Engine coolant expansion tank kit. The kit combines a coolant expansion tank, a pressure cap, and long-life antifreeze concentrate to deliver a complete coolant system refresh.
Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2.7L / 3.2L 2005 - 2006 (9625, 9626)
Diagram ref no 8, 11, 26, 27
This OE Match kit is engineered for Porsche vehicles that utilise 99610614708 style expansion tanks - most commonly fitting Porsche Boxster 986 (1997-2004) and 987 (2005-2006) models. Always verify fitment with your specific year, engine and chassis before ordering.
The engine coolant expansion tank kit includes:
• 99610614708/1 × 1 – OE Match Coolant Expansion Tank: Precisely manufactured replacement reservoir designed to match the original Porsche part used on Boxster models. It collects excess coolant as it expands under heat and releases it back into the system as it cools down.
• 99610644704/1 × 1 – OE Match Expansion Tank Cap: A direct-fit cap that seals the coolant reservoir and helps maintain proper pressure in the cooling system, aiding heat control and preventing coolant loss.
• 00004330194 × 5 – Comma Antifreeze Coolant (1 L Red, 5-Year Concentrate): Premium antifreeze concentrated coolant that, when mixed correctly with water, delivers long-lasting protection against freezing, boiling, and corrosion.
This kit brings together all the primary components you need when servicing or refreshing the coolant expansion side of your engine’s cooling system.
The expansion tank accepts expanding coolant from the radiator and engine as temperatures rise, storing it safely and helping maintain correct coolant levels. The cap seals the system and maintains the right amount of pressure, allowing the cooling system to function efficiently. The antifreeze provided offers long-term protection against corrosion, freezing and overheating - crucial to preserving engine health and reducing wear.
Over time, the original plastic tank can become brittle or crack due to heat cycling and age, which may lead to leaks, coolant loss, or air infiltration that disrupts coolant circulation. A failing pressure cap can no longer maintain correct system pressure, reducing cooling efficiency. Replacing these components with OE Match parts helps restore reliable coolant containment and pressure stability - helping prevent costly overheating and engine damage.
Replace these parts when you notice any of the following conditions:
• Cracks or visible leaks around the expansion tank
• Discolouration or brittleness of plastic components
• Coolant level fluctuations without visible leaks
• Overheating symptoms or reduced cooling performance
• Routine coolant system maintenance interval is due
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT986.1
99610614708
99610614703
99610614704
99610614705
99610614706
99610614707
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Coolant bottle. Porsche Boxster 986 / Boxster 987 1997-06 (99610614708/1)
1 x Coolant reservoir / expansion tank cap. Porsche Boxster 986 / Boxster 987 / Cayman 987C / 996 / 997 (99610644704/1)
5 x Antifreeze 1Ltr Concentrate Bottle 5 year Red (00004330194)
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
€209.35 inc. VAT
Now €188.40 inc. VAT
Due In 17 Days
COOLTANKKIT996.2
Product Information
This is a comprehensive OE Match-quality service kit designed to refresh and restore the engine coolant expansion system for Porsche vehicles. It includes the expansion tank, pressure cap, long-life antifreeze, and a coolant level sensor - giving you all major components needed for a proper coolant system service.
Fits:
Porsche 996 C2 / C4 1997 - 2000
Porsche 996 GT3 MKI 1997 - 2000
Diagram ref no 1, 2, 3, 4, 5, 9, 11, 12.
This engine coolant expansion tank kit brings together all the essential components that ensure your Porsche’s coolant system works efficiently and reliably:
• 1x 99610614756/1 – OE Match Coolant Expansion Tank Bottle: A high-quality OE Match reservoir that captures overflow and maintains appropriate coolant volume.
• 1x 99610644704/1 – OE Match Expansion Tank Cap: Maintains correct cooling system pressure to optimize thermal performance.
• 5x 00004330194 – Comma 1 L Antifreeze Concentrate (Red, 5-Year): Long-life coolant concentrate to mix with distilled water, offering corrosion protection and thermal stability.
• 1x 99764150300/1 – OE Match Coolant Level Sensor: Monitors coolant level inside the expansion tank and alerts the driver if the level drops too low.
Together, these items create a complete cooling system refill and monitoring kit.
This kit refurbishes the coolant expansion side of the cooling system. The expansion tank stores excess coolant when the engine heats up and returns it as it cools. The pressure cap ensures the system operates at the correct pressure, which increases coolant boiling point and improves efficiency. The included coolant provides balanced antifreeze protection and corrosion resistance for years, while the sensor keeps track of coolant level and triggers warnings if levels fall below safe thresholds.
Over time, plastic coolant expansion tanks can become brittle, cracked, or distorted, leading to leaks and loss of coolant. A weak pressure cap can fail to maintain proper system pressure, reducing cooling effectiveness. Old coolant can lose its protective qualities, leading to corrosion and overheating. Without a functioning coolant level sensor, you may not be alerted to low coolant levels, increasing risk of engine overheating or damage. This kit replaces all of these important parts at once, restoring correct operation and helping ensure the engine stays well-protected.
Replace any of these components if you observe the following:
• Cracks, leaks, or deformation in the expansion tank.
• A non-sealing or failing pressure cap.
• Coolant looks discoloured, sludgy, or contaminated.
• Dashboard warning light for coolant level.
• Regular service interval for coolant change is due.
• Unexplained engine temperature fluctuations.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT996.2
The product you are viewing cross references to these numbers
Product Information
Engine coolant expansion tank kit with sensor. This is a comprehensive OE Match-quality service kit designed to refresh and restore the engine coolant expansion system for Porsche vehicles. It includes the expansion tank, pressure cap, long-life antifreeze, and a coolant level sensor - giving you all major components needed for a proper coolant system service.
Fits:
Porsche 996 C2 / C4 1997 - 2000
Porsche 996 GT3 MKI 1997 - 2000
Diagram ref no 1, 2, 3, 4, 5, 9, 11, 12.
This engine coolant expansion tank kit brings together all the essential components that ensure your Porsche’s coolant system works efficiently and reliably:
• 1x 99610614756/1 – OE Match Coolant Expansion Tank Bottle: A high-quality OE Match reservoir that captures overflow and maintains appropriate coolant volume.
• 1x 99610644704/1 – OE Match Expansion Tank Cap: Maintains correct cooling system pressure to optimize thermal performance.
• 5x 00004330194 – Comma 1 L Antifreeze Concentrate (Red, 5-Year): Long-life coolant concentrate to mix with distilled water, offering corrosion protection and thermal stability.
• 1x 99764150300/1 – OE Match Coolant Level Sensor: Monitors coolant level inside the expansion tank and alerts the driver if the level drops too low.
Together, these items create a complete cooling system refill and monitoring kit.
This kit refurbishes the coolant expansion side of the cooling system. The expansion tank stores excess coolant when the engine heats up and returns it as it cools. The pressure cap ensures the system operates at the correct pressure, which increases coolant boiling point and improves efficiency. The included coolant provides balanced antifreeze protection and corrosion resistance for years, while the sensor keeps track of coolant level and triggers warnings if levels fall below safe thresholds.
Over time, plastic coolant expansion tanks can become brittle, cracked, or distorted, leading to leaks and loss of coolant. A weak pressure cap can fail to maintain proper system pressure, reducing cooling effectiveness. Old coolant can lose its protective qualities, leading to corrosion and overheating. Without a functioning coolant level sensor, you may not be alerted to low coolant levels, increasing risk of engine overheating or damage. This kit replaces all of these important parts at once, restoring correct operation and helping ensure the engine stays well-protected.
Replace any of these components if you observe the following:
• Cracks, leaks, or deformation in the expansion tank.
• A non-sealing or failing pressure cap.
• Coolant looks discoloured, sludgy, or contaminated.
• Dashboard warning light for coolant level.
• Regular service interval for coolant change is due.
• Unexplained engine temperature fluctuations.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT996.2
99610614753
99610614754
99610614755
99610614756
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Coolant expansion tank bottle. Porsche 996 1997 - 2000 (99610614756/1)
1 x Coolant reservoir / expansion tank cap. Porsche Boxster 986 / Boxster 987 / Cayman 987C / 996 / 997 (99610644704/1)
1 x Coolant bottle level sensor. Porsche Boxster 986 / Boxster 987 / 996 / 997 (99764150300/1)
5 x Antifreeze 1Ltr Concentrate Bottle 5 year Red (00004330194)
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 GT3 MKI 1999-02
€161.97 inc. VAT
Now €145.77 inc. VAT
Due In 17 Days
COOLTANKKIT996.1
Product Information
The kit combines a coolant expansion tank, a pressure cap, and long-life antifreeze concentrate to deliver a complete coolant system refresh.
Fits:
Porsche 996 C2 / C4 1997 - 2000
Porsche 996 GT3 MKI 1997 - 2000
Diagram ref no 1, 3, 4, 5, 9, 11, 12.
This comprehensive kit includes the essential parts needed when servicing or replacing the coolant expansion system on Porsche models that use part number 99610614756. An OE Match expansion tank provides a direct fit and correct performance:
• 1x 99610614756/1 – OE Match Coolant expansion tank - for correct fit & durability.
• 1x 99610644704/1 – OE Match Coolant expansion tank pressure cap - to hold system pressure and prevent boiling/overflow.
• 5x 00004330194 – Comma Concentrated Long-Life Red Antifreeze / Coolant - for optimal cooling & corrosion protection.
This kit refreshes the entire coolant expansion side of the cooling system. The expansion tank collects excess coolant and allows it to return to the system as temperatures change. The pressure cap controls system pressure, raising coolant boiling point and preventing air ingress. The antifreeze bottles supply corrosion protection, freezing/boiling point stability, and long-term fluid protection when mixed and filled.
A worn or failing expansion tank can crack, leak or lose pressure, leading to coolant loss, overheating, and potential engine damage over time. The pressure cap also plays a critical role: an old or weak cap can fail to hold sufficient system pressure, lowering coolant boiling point and reducing cooling efficiency. Fresh antifreeze not only prevents freezing/boiling extremes but also protects metal parts from corrosion, improving overall engine health and heat management.
Replace components when you notice any of the following:
• Coolant reservoir shows cracks, swelling, brittleness or leaks.
• Coolant fluid levels change unexpectedly without visible leaks.
• Pressure cap no longer maintains correct system pressure.
• Coolant appears contaminated, sludgy, or discoloured.
• Recommended coolant change interval (e.g., every 2–5 years) is due.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT996.1
The product you are viewing cross references to these numbers
Product Information
Engine coolant expansion tank kit. The kit combines a coolant expansion tank, a pressure cap, and long-life antifreeze concentrate to deliver a complete coolant system refresh.
Fits:
Porsche 996 C2 / C4 1997 - 2000
Porsche 996 GT3 MKI 1997 - 2000
Diagram ref no 1, 3, 4, 5, 9, 11, 12.
This comprehensive kit includes the essential parts needed when servicing or replacing the coolant expansion system on Porsche models that use part number 99610614756. An OE Match expansion tank provides a direct fit and correct performance:
• 1x 99610614756/1 – OE Match Coolant expansion tank - for correct fit & durability.
• 1x 99610644704/1 – OE Match Coolant expansion tank pressure cap - to hold system pressure and prevent boiling/overflow.
• 5x 00004330194 – Comma Concentrated Long-Life Red Antifreeze / Coolant - for optimal cooling & corrosion protection.
This kit refreshes the entire coolant expansion side of the cooling system. The expansion tank collects excess coolant and allows it to return to the system as temperatures change. The pressure cap controls system pressure, raising coolant boiling point and preventing air ingress. The antifreeze bottles supply corrosion protection, freezing/boiling point stability, and long-term fluid protection when mixed and filled.
A worn or failing expansion tank can crack, leak or lose pressure, leading to coolant loss, overheating, and potential engine damage over time. The pressure cap also plays a critical role: an old or weak cap can fail to hold sufficient system pressure, lowering coolant boiling point and reducing cooling efficiency. Fresh antifreeze not only prevents freezing/boiling extremes but also protects metal parts from corrosion, improving overall engine health and heat management.
Replace components when you notice any of the following:
• Coolant reservoir shows cracks, swelling, brittleness or leaks.
• Coolant fluid levels change unexpectedly without visible leaks.
• Pressure cap no longer maintains correct system pressure.
• Coolant appears contaminated, sludgy, or discoloured.
• Recommended coolant change interval (e.g., every 2–5 years) is due.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
COOLTANKKIT996.1
99610614753
99610614754
99610614755
99610614756
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Coolant expansion tank bottle. Porsche 996 1997 - 2000 (99610614756/1)
1 x Coolant reservoir / expansion tank cap. Porsche Boxster 986 / Boxster 987 / Cayman 987C / 996 / 997 (99610644704/1)
5 x Antifreeze 1Ltr Concentrate Bottle 5 year Red (00004330194)
Vehicle Group
Vehicle Group
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 GT3 MKI 1999-02
€136.23 inc. VAT
Now €122.60 inc. VAT
Due In 17 Days
9P1907637C/1
Product Information
Brake wear sensors are a critical component of modern brake systems, helping drivers maintain safe braking performance and avoid costly damage to rotors and calipers due to excessive pad wear.
Sold each, 2 required per vehicle.
Fits:
Porsche 992.1 Carrera 2019 - 2024
* cars with 17-inch brake disc, brake caliper YELLOW (PR:A8C,A8F+ 2EC,2EU)
* cars with 17-inch brake disc, brake caliper RED / BLACK (PR:2EB,2ET)
Porsche 992.1 Turbo 2020 - 2025
* cars with brake caliper YELLOW (PR:2EC,2EU)
* cars with PR:2EB,2ET
Porsche 992.2 Carrera S / GTS 2024>>
Porsche 992.2 Turbo 2026>>
* cars with PCCB brakes, (PR:2EC,2EU)
Diagram ref no 7
The rear brake pad wear sensor monitors the thickness of the brake pad friction material. When the pad wears down to a predetermined limit, the sensor alerts the vehicle’s onboard systems (and driver) via a dashboard indicator, helping prevent damage to the braking system and maintaining safety.
Function:
• Detects rear brake pad wear
• Signals brake wear status to the dashboard
• Helps avoid excessive pad wear or rotor scoring
• Supports timely and safe brake maintenance
Driving with worn brake pads without proper indication can lead to:
• Reduced braking performance
• Longer stopping distances
• Scored or damaged rotors
• Risk of brake system component failure.
A functioning brake pad wear sensor helps maintain optimal brake performance and prevents unnecessary damage to expensive brake components.
When to replace:
• Rear brake wear warning light illuminates
• During rear brake pad replacement
• If sensor wire, connector, or clip is damaged
• When replacing rotors or servicing rear brake hardware.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1907637C
The product you are viewing cross references to these numbers
Product Information
Brake pad wear sensor, RearBrake wear sensors are a critical component of modern brake systems, helping drivers maintain safe braking performance and avoid costly damage to rotors and calipers due to excessive pad wear.
Sold each, 2 required per vehicle.
Fits:
Porsche 992.1 Carrera 2019 - 2024
* cars with 17-inch brake disc, brake caliper YELLOW (PR:A8C,A8F+ 2EC,2EU)
* cars with 17-inch brake disc, brake caliper RED / BLACK (PR:2EB,2ET)
Porsche 992.1 Turbo 2020 - 2025
* cars with brake caliper YELLOW (PR:2EC,2EU)
* cars with PR:2EB,2ET
Porsche 992.2 Carrera S / GTS 2024>>
Porsche 992.2 Turbo 2026>>
* cars with PCCB brakes, (PR:2EC,2EU)
Diagram ref no 7
The rear brake pad wear sensor monitors the thickness of the brake pad friction material. When the pad wears down to a predetermined limit, the sensor alerts the vehicle’s onboard systems (and driver) via a dashboard indicator, helping prevent damage to the braking system and maintaining safety.
Function:
• Detects rear brake pad wear
• Signals brake wear status to the dashboard
• Helps avoid excessive pad wear or rotor scoring
• Supports timely and safe brake maintenance
Driving with worn brake pads without proper indication can lead to:
• Reduced braking performance
• Longer stopping distances
• Scored or damaged rotors
• Risk of brake system component failure.
A functioning brake pad wear sensor helps maintain optimal brake performance and prevents unnecessary damage to expensive brake components.
When to replace:
• Rear brake wear warning light illuminates
• During rear brake pad replacement
• If sensor wire, connector, or clip is damaged
• When replacing rotors or servicing rear brake hardware.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1907637C
9P1907637C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.1 Turbo 3.8L 2020-24
- Porsche 992.1 Turbo S 3.8L 2020-24
- Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
- Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Turbo 3.6L 2024>>
€18.66 inc. VAT
Now €16.79 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
9P1907253/1
Product Information
front brake pad wear sensor designed for use on Porsche 992.1 Carrera (C2 / C4) models from 2019–2024. This sensor monitors the thickness of the front brake pads and alerts the driver when the pads reach their wear limit - ensuring timely brake service and continued optimal braking performance.
Sold each, Fits left and right.
Fits:
For cars with 17-inch brake disc, brake caliper BLACK (PR:A8C+1LS)
Cars with option code: A8C - 'Comfort' equipment
Cars with option code: 1LS - Disc brakes in front, with integrated brake carrier
Porsche 992.1 Carrera 2 / Carrera 4 3.0L 2019 - 2024
Porsche 992.1 Carrera 2 / Carrera 4 3.0L 2019 - 2024 Cabriolet
Porsche 992.1 Targa 4 3.0L 2020 - 2024
Diagram ref no 7
The sensor detects brake pad wear and sends a signal to the vehicle’s onboard electronics to warn the driver when the front brake pads have worn close to the service limit. This helps avoid brake damage or reduced stopping performance due to neglected pads.
Function:
• Monitors front brake pad thickness
• Sends a wear warning signal to the dashboard
• Helps prevent excessive pad wear or rotor damage
• Supports timely brake servicing and safety.
Driving with worn brake pads without an alert can lead to:
• Reduced braking performance
• Increased stopping distances
• Scored or damaged rotors
• Higher long-term repair costs
A functioning wear sensor ensures you know exactly when pads need replacing, preventing avoidable damage and maintaining optimum safety.
When to replace:
• Brake pad wear warning light or message
• During front brake pad replacement
• If sensor wire or connector is damaged
• After signs of uneven or accelerated pad wear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1907253
The product you are viewing cross references to these numbers
Product Information
Front brake pad wear sensor.front brake pad wear sensor designed for use on Porsche 992.1 Carrera (C2 / C4) models from 2019–2024. This sensor monitors the thickness of the front brake pads and alerts the driver when the pads reach their wear limit - ensuring timely brake service and continued optimal braking performance.
Sold each, Fits left and right.
Fits:
For cars with 17-inch brake disc, brake caliper BLACK (PR:A8C+1LS)
Cars with option code: A8C - 'Comfort' equipment
Cars with option code: 1LS - Disc brakes in front, with integrated brake carrier
Porsche 992.1 Carrera 2 / Carrera 4 3.0L 2019 - 2024
Porsche 992.1 Carrera 2 / Carrera 4 3.0L 2019 - 2024 Cabriolet
Porsche 992.1 Targa 4 3.0L 2020 - 2024
Diagram ref no 7
The sensor detects brake pad wear and sends a signal to the vehicle’s onboard electronics to warn the driver when the front brake pads have worn close to the service limit. This helps avoid brake damage or reduced stopping performance due to neglected pads.
Function:
• Monitors front brake pad thickness
• Sends a wear warning signal to the dashboard
• Helps prevent excessive pad wear or rotor damage
• Supports timely brake servicing and safety.
Driving with worn brake pads without an alert can lead to:
• Reduced braking performance
• Increased stopping distances
• Scored or damaged rotors
• Higher long-term repair costs
A functioning wear sensor ensures you know exactly when pads need replacing, preventing avoidable damage and maintaining optimum safety.
When to replace:
• Brake pad wear warning light or message
• During front brake pad replacement
• If sensor wire or connector is damaged
• After signs of uneven or accelerated pad wear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9P1907253
9P1907253
9A790763700
971907253
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
€18.66 inc. VAT
Now €16.79 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99959132601/1KIT
Product Information
The set provides the correct quantity of clips needed to securely refit door mouldings during repair, restoration, or trim replacement. When installed, the clips hold the door mouldings firmly against the door panel, ensuring correct alignment and a clean, factory-style exterior finish.
SET OF 14.
Fits:
Porsche 911/912/930 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1995 - 1998
Diagram ref no 8
Door moulding clips are often damaged or lost when trim is removed, especially on older vehicles. This 14-piece set offers a convenient and cost-effective solution, ensuring all clips are replaced at once for consistent holding strength across the entire moulding.
The clips secure the exterior door mouldings to the door, preventing movement, rattles, or trim loss while maintaining proper spacing between the moulding and bodywork.
Function:
• Secures exterior door mouldings to the door panel
• Maintains correct trim alignment and fit
• Prevents rattles, vibration, or trim loss
• Supports a clean, factory-correct exterior finish
Application: Exterior door moulding / trim clip
Position: Door moulding attachment points
Reusing old or brittle clips can lead to poor trim retention, vibration, or damage to both the moulding and the door panel. Replacing all clips at once ensures even pressure, secure fitment, and long-lasting trim stability.
When to Replace:
• During door moulding removal or refit
• If clips are broken, corroded, or missing
• Loose or rattling door trim
• As part of restoration or repaint work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959132601
The product you are viewing cross references to these numbers
Product Information
Door moulding clip set.The set provides the correct quantity of clips needed to securely refit door mouldings during repair, restoration, or trim replacement. When installed, the clips hold the door mouldings firmly against the door panel, ensuring correct alignment and a clean, factory-style exterior finish.
SET OF 14.
Fits:
Porsche 911/912/930 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1995 - 1998
Diagram ref no 8
Door moulding clips are often damaged or lost when trim is removed, especially on older vehicles. This 14-piece set offers a convenient and cost-effective solution, ensuring all clips are replaced at once for consistent holding strength across the entire moulding.
The clips secure the exterior door mouldings to the door, preventing movement, rattles, or trim loss while maintaining proper spacing between the moulding and bodywork.
Function:
• Secures exterior door mouldings to the door panel
• Maintains correct trim alignment and fit
• Prevents rattles, vibration, or trim loss
• Supports a clean, factory-correct exterior finish
Application: Exterior door moulding / trim clip
Position: Door moulding attachment points
Reusing old or brittle clips can lead to poor trim retention, vibration, or damage to both the moulding and the door panel. Replacing all clips at once ensures even pressure, secure fitment, and long-lasting trim stability.
When to Replace:
• During door moulding removal or refit
• If clips are broken, corroded, or missing
• Loose or rattling door trim
• As part of restoration or repaint work
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99959132601
99959132601
99959132602
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
14 x Door moulding clip. Porsche 911/964/993 1965-98 (99959132601/1)
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€16.24 inc. VAT
Now €14.56 inc. VAT
In Stock - 24 Hour Dispatch
9A7407271
Product Information
OE Match drive shaft assembly, also known as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche factory component.
Fits:
Porsche 971.1 Panamera 2017 - 2020
Cars with option codes:
(0J2) - Load group 1 FA/1 RA
(0J3) - Load group 1 FA/2 RA
(0J5) - Load group 2 FA/2 RA
(0J8) - Load group 2 FA/1 RA
Porsche 971.2 Panamera 2021 - 2023
Cars with options codes:
(0J2) - Load group 1 FA/1 RA
(0J3) - Load group 1 FA/2 RA
(0J5) - Load group 2 FA/2 RA
(0J8) - Load group 2 FA/1 RA
(1X1) - All-wheel drive
(A8C) - 'Standard' equipment
(A8F) - 'S' equipment
(A8H) - 'turbo' equipment
Porsche 976 Panamera 2024>>
Cars with options codes:
(1PA) - Standard wheel bolts
(1PE) - Wheel bolts with anti-theft protection (unlockable)
Diagram ref no 1
The drive shaft transfers engine torque from the transmission or differential to the wheel hub, enabling the driven wheels to propel the vehicle. The integrated CV joints allow the shaft to operate smoothly at varying angles as the suspension compresses and rebounds, ensuring uninterrupted power delivery during acceleration, cornering, and uneven road surfaces.
Function:
• Transfers rotational force from the drivetrain to the wheel
• Allows suspension articulation via constant-velocity joints
• Maintains smooth, low-vibration power delivery
• Supports traction, stability, and refined driving dynamics
Drive shafts operate under continuous torque, rotational load, and suspension movement. Over time, CV joints and boots can wear, leading to noise, vibration, grease leakage, and uneven power delivery. Replacing a worn axle with an OE Match assembly restores smooth drivetrain operation and helps prevent secondary wear to wheel bearings, differentials, and suspension components.
When to replace :
• Clicking or knocking noises during turning or acceleration
• Vibration or shudder under load
• Torn or leaking CV boots
• Excessive play found during inspection
• During suspension, hub, or drivetrain service where wear is identified
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A7407271
The product you are viewing cross references to these numbers
Product Information
Driveshaft, Front.OE Match drive shaft assembly, also known as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche factory component.
Fits:
Porsche 971.1 Panamera 2017 - 2020
Cars with option codes:
(0J2) - Load group 1 FA/1 RA
(0J3) - Load group 1 FA/2 RA
(0J5) - Load group 2 FA/2 RA
(0J8) - Load group 2 FA/1 RA
Porsche 971.2 Panamera 2021 - 2023
Cars with options codes:
(0J2) - Load group 1 FA/1 RA
(0J3) - Load group 1 FA/2 RA
(0J5) - Load group 2 FA/2 RA
(0J8) - Load group 2 FA/1 RA
(1X1) - All-wheel drive
(A8C) - 'Standard' equipment
(A8F) - 'S' equipment
(A8H) - 'turbo' equipment
Porsche 976 Panamera 2024>>
Cars with options codes:
(1PA) - Standard wheel bolts
(1PE) - Wheel bolts with anti-theft protection (unlockable)
Diagram ref no 1
The drive shaft transfers engine torque from the transmission or differential to the wheel hub, enabling the driven wheels to propel the vehicle. The integrated CV joints allow the shaft to operate smoothly at varying angles as the suspension compresses and rebounds, ensuring uninterrupted power delivery during acceleration, cornering, and uneven road surfaces.
Function:
• Transfers rotational force from the drivetrain to the wheel
• Allows suspension articulation via constant-velocity joints
• Maintains smooth, low-vibration power delivery
• Supports traction, stability, and refined driving dynamics
Drive shafts operate under continuous torque, rotational load, and suspension movement. Over time, CV joints and boots can wear, leading to noise, vibration, grease leakage, and uneven power delivery. Replacing a worn axle with an OE Match assembly restores smooth drivetrain operation and helps prevent secondary wear to wheel bearings, differentials, and suspension components.
When to replace :
• Clicking or knocking noises during turning or acceleration
• Vibration or shudder under load
• Torn or leaking CV boots
• Excessive play found during inspection
• During suspension, hub, or drivetrain service where wear is identified
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9A7407271
9A7407271F
971407271P
971407271AA
PAE407271C
PAE407271L
9A7407271G
971407271Q
971407271AB
PAE407271B
PAE407271K
9A7407271D
971407271M
971407271R
971407271AN
9A7407271E
971407271N
971407271S
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 971.1 Panamera 4 V6 3.0L 4WD (330 Hp) 2017-20
- Porsche 971.1 Panamera 4 V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 3.0L Turbocharged V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD (440 Hp) 2017-20
- Porsche 971.1 Panamera 4S V6 3.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
- Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2017-20
- Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD (550 Hp) 2017-20
- Porsche 971.1 Panamera Turbo V8 4.0L 4WD Executive 2017-20
- Porsche 971.1 Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD 2017-20
- Porsche 971.1 Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive 2017-20
- Porsche 971.2 Panamera 4 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
- Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23
- Porsche 971.2 Panamera GTS 4.0L V8 2021-23
- Porsche 971.2 Panamera GTS Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S Sport Turismo 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid 4.0L V8 2021-23
- Porsche 971.2 Panamera Turbo S E-Hybrid Sport Turismo 4.0L V8 2021-23
- Porsche 976 Panamera 4 V6 2.9L 2023>>
- Porsche 976 Panamera 4 E-Hybrid V6 2.9L 2023>>
- Porsche 976 Panamera 4S E-Hybrid V6 2.9L 2023>>
- Porsche 976 Panamera GTS V8 4.0L 2023>>
- Porsche 976 Panamera Turbo E-Hybrid V8 4.0L 2023>>
- Porsche 976 Panamera Turbo S E-Hybrid V8 4.0L 2023>>
Select below:
Prices from: €940.03 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
982501203M/1
Product Information
OE Match rear drive shaft assembly, also known as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche component used on Porsche 718 (982) Boxster S and Cayman S models with PDK transmission
Sold each, Fits left and right side.
Fits:
for vehicle with PDK Transmission (Dual clutch) - option code: 250
Porsche 982 (718) Boxster S 2017>>
Porsche 982C (718C) Cayman S 2017>>
Diagram ref no 1
This part replaces earlier Porsche numbers 982501203C, 982501203D, and 982501203J.
The rear drive shaft transfers engine torque from the transmission or rear differential to the wheel hub, enabling the driven wheels to propel the vehicle. Integrated CV joints allow smooth power delivery even as the suspension articulates, maintaining consistent traction during acceleration, cornering, and changes in road surface.
Function:
• Transfers rotational force from the drivetrain to the rear wheel
• Accommodates suspension movement via constant-velocity joints
• Maintains smooth, low-vibration power delivery
• Supports stable handling and drivetrain reliability
Worn CV joints or damaged boots can cause clicking noises, vibration under load, grease leakage, and uneven power delivery. Replacing a failing axle restores smooth drivetrain operation and helps protect surrounding components such as wheel bearings and differentials.
When to replace:
• Clicking or knocking noises during acceleration or turning
• Vibration or shudder under load
• Torn or leaking CV boots
• Excessive play detected during inspection
• During suspension, hub, or drivetrain service revealing wear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982501203M
The product you are viewing cross references to these numbers
Product Information
Driveshaft, Rear. OE Match rear drive shaft assembly, also known as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche component used on Porsche 718 (982) Boxster S and Cayman S models with PDK transmission
Sold each, Fits left and right side.
Fits:
for vehicle with PDK Transmission (Dual clutch) - option code: 250
Porsche 982 (718) Boxster S 2017>>
Porsche 982C (718C) Cayman S 2017>>
Diagram ref no 1
This part replaces earlier Porsche numbers 982501203C, 982501203D, and 982501203J.
The rear drive shaft transfers engine torque from the transmission or rear differential to the wheel hub, enabling the driven wheels to propel the vehicle. Integrated CV joints allow smooth power delivery even as the suspension articulates, maintaining consistent traction during acceleration, cornering, and changes in road surface.
Function:
• Transfers rotational force from the drivetrain to the rear wheel
• Accommodates suspension movement via constant-velocity joints
• Maintains smooth, low-vibration power delivery
• Supports stable handling and drivetrain reliability
Worn CV joints or damaged boots can cause clicking noises, vibration under load, grease leakage, and uneven power delivery. Replacing a failing axle restores smooth drivetrain operation and helps protect surrounding components such as wheel bearings and differentials.
When to replace:
• Clicking or knocking noises during acceleration or turning
• Vibration or shudder under load
• Torn or leaking CV boots
• Excessive play detected during inspection
• During suspension, hub, or drivetrain service revealing wear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982501203M
982501203C
982501203D
982501203J
982501203M
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
€755.67 inc. VAT
Now €680.10 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
97034903809/1
Product Information
OE Match drive shaft assembly, also referred to as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche drivetrain component used on Porsche Panamera (970 generation) All-wheel drive models.
Sold each. Fits left and right side.
Fits:
for All-wheel drive cars only (option code: 339)
Porsche 970 Panamera 4 / 4S / Turbo / GTS >>2010
Diagram ref no 1
The drive shaft transfers engine torque from the transmission or differential to the wheel hub, enabling the vehicle to move. The integrated CV joints allow smooth power delivery even as the suspension articulates, ensuring consistent traction and refined drivetrain behaviour during acceleration, cornering, and uneven road conditions.
Function:
• Transfers rotational force from the drivetrain to the wheel
• Allows suspension articulation via constant-velocity joints
• Maintains smooth, vibration-free power delivery
• Supports traction, stability, and ride comfort
Worn CV joints or damaged boots can cause clicking noises, vibration under load, grease leakage, and uneven power delivery. Replacing a failing axle restores smooth drivetrain operation and helps prevent additional wear to wheel bearings, differentials, and suspension components.
When to replace:
• Clicking or knocking noises during acceleration or turning
• Vibration or shudder under load
• Torn or leaking CV boots
• Excessive play detected during inspection
• During suspension, hub, or drivetrain service revealing wear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034903809
The product you are viewing cross references to these numbers
Product Information
Replacement driveshaft. FRONT.OE Match drive shaft assembly, also referred to as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche drivetrain component used on Porsche Panamera (970 generation) All-wheel drive models.
Sold each. Fits left and right side.
Fits:
for All-wheel drive cars only (option code: 339)
Porsche 970 Panamera 4 / 4S / Turbo / GTS >>2010
Diagram ref no 1
The drive shaft transfers engine torque from the transmission or differential to the wheel hub, enabling the vehicle to move. The integrated CV joints allow smooth power delivery even as the suspension articulates, ensuring consistent traction and refined drivetrain behaviour during acceleration, cornering, and uneven road conditions.
Function:
• Transfers rotational force from the drivetrain to the wheel
• Allows suspension articulation via constant-velocity joints
• Maintains smooth, vibration-free power delivery
• Supports traction, stability, and ride comfort
Worn CV joints or damaged boots can cause clicking noises, vibration under load, grease leakage, and uneven power delivery. Replacing a failing axle restores smooth drivetrain operation and helps prevent additional wear to wheel bearings, differentials, and suspension components.
When to replace:
• Clicking or knocking noises during acceleration or turning
• Vibration or shudder under load
• Torn or leaking CV boots
• Excessive play detected during inspection
• During suspension, hub, or drivetrain service revealing wear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034903809
97034903801
97034903802
97034903805
97034903809
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
€263.25 inc. VAT
Now €236.92 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
97034903808/2
Product Information
A replacement drive shaft assembly (constant-velocity axle) engineered to closely replicate the original Porsche factory-installed component used on select Porsche Panamera (970) models. It is built to match the correct geometry, materials, and performance characteristics of the OE part for a direct, no-modification fit.
Sold each. Fits left and right side.
Fits:
for All-wheel drive cars only (option code: I339)
Porsche 970.1 Panamera 4 / 4S / Turbo / GTS 2011 - 2013
Porsche 970.2 Panamera 4 / 4S / Turbo / GTS 2014 - 2016
Diagram ref no 1
OE Match CV axle / drive shaft assembly corresponding to Porsche part number 97034903806 (also referenced as 970-349-038-06). The part supersedes older Porsche references 97034903803 and 97034903804,
The drive shaft (CV axle) plays an essential role in the vehicle’s drivetrain system, transferring torque from the transmission/differential to the wheel hub, enabling the car’s wheels to turn and propel the vehicle. The CV joints at each end of the shaft allow smooth power delivery even while the suspension articulates and wheels move through varying angles - essential for maintaining traction and refined handling.
Function:
• Transfers engine torque to the wheel hub
• Provides flexibility and smooth operation through CV joints
• Accommodates suspension movement with minimal vibration
• Maintains balanced power delivery during acceleration and cornering.
OE Match drive shafts are built with high-quality bearings, robust joint housings, and durable boots to replicate the original performance under typical driving stresses.
Drive shafts and their CV joints experience continuous rotational force, road shock, and suspension movement. Wear or failure may show up as:
• Clicking or popping noises during turns
• Vibration or shudder under acceleration
• Grease leakage from damaged CV boots
• Uneven power delivery or drivetrain vibration.
Replacing a worn or compromised axle with an OE Match assembly restores smooth torque transfer and driveline stability while helping protect differential and wheel bearing components from additional stress.
Replace this axle if you notice:
• Audible CV joint noise when cornering
• Vibration or shudder under power
• Torn or leaking CV joint boots
• Excessive play or looseness on inspection
• During related suspension or drivetrain overhauls
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034903808
The product you are viewing cross references to these numbers
Product Information
Replacement driveshaft. FRONT.A replacement drive shaft assembly (constant-velocity axle) engineered to closely replicate the original Porsche factory-installed component used on select Porsche Panamera (970) models. It is built to match the correct geometry, materials, and performance characteristics of the OE part for a direct, no-modification fit.
Sold each. Fits left and right side.
Fits:
for All-wheel drive cars only (option code: I339)
Porsche 970.1 Panamera 4 / 4S / Turbo / GTS 2011 - 2013
Porsche 970.2 Panamera 4 / 4S / Turbo / GTS 2014 - 2016
Diagram ref no 1
OE Match CV axle / drive shaft assembly corresponding to Porsche part number 97034903806 (also referenced as 970-349-038-06). The part supersedes older Porsche references 97034903803 and 97034903804,
The drive shaft (CV axle) plays an essential role in the vehicle’s drivetrain system, transferring torque from the transmission/differential to the wheel hub, enabling the car’s wheels to turn and propel the vehicle. The CV joints at each end of the shaft allow smooth power delivery even while the suspension articulates and wheels move through varying angles - essential for maintaining traction and refined handling.
Function:
• Transfers engine torque to the wheel hub
• Provides flexibility and smooth operation through CV joints
• Accommodates suspension movement with minimal vibration
• Maintains balanced power delivery during acceleration and cornering.
OE Match drive shafts are built with high-quality bearings, robust joint housings, and durable boots to replicate the original performance under typical driving stresses.
Drive shafts and their CV joints experience continuous rotational force, road shock, and suspension movement. Wear or failure may show up as:
• Clicking or popping noises during turns
• Vibration or shudder under acceleration
• Grease leakage from damaged CV boots
• Uneven power delivery or drivetrain vibration.
Replacing a worn or compromised axle with an OE Match assembly restores smooth torque transfer and driveline stability while helping protect differential and wheel bearing components from additional stress.
Replace this axle if you notice:
• Audible CV joint noise when cornering
• Vibration or shudder under power
• Torn or leaking CV joint boots
• Excessive play or looseness on inspection
• During related suspension or drivetrain overhauls
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034903808
97034903803
97034903804
97034903806
97034903808
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
€228.15 inc. VAT
Now €205.33 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
99133202462/1
Product Information
OE Match rear drive shaft assembly, also known as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche component used on Porsche 911 (991 generation) models.
Sold each, Fits left and right side.
Fits:
For cars with PDK Transmission (dual clutch) - option code: 250
Porsche 991.2 Carrera 2 / 2S / GTS 2017 - 2021
Porsche 991.2 Carrera 4 / 4S / 4 GTS 2017 - 2021
Porsche 991.2 Targa 4 / 4S / 4 GTS 2017 - 2021
Diagram ref no 1
The rear drive shaft transfers engine torque from the differential to the rear wheel, allowing the vehicle to accelerate and maintain traction. The integrated CV joints enable smooth power delivery at varying angles as the suspension moves, ensuring consistent performance during acceleration, cornering, and over uneven road surfaces.
Function:
• Transfers rotational force from the differential to the wheel hub
• Allows suspension articulation via constant-velocity joints
• Maintains smooth, low-vibration power delivery Supports stable handling and drivetrain reliability
Worn CV joints or damaged boots can cause clicking noises, vibration under load, grease leakage, and uneven power delivery. Replacing a compromised axle with an OE Match quality drive shaft restores smooth drivetrain operation and helps protect related components such as wheel bearings and differentials.
Replace the drive shaft if you notice:
• Clicking or knocking noises when accelerating or turning
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133202462
The product you are viewing cross references to these numbers
Product Information
Driveshaft, Rear. OE Match rear drive shaft assembly, also known as a constant-velocity (CV) axle, designed as a direct replacement for the original Porsche component used on Porsche 911 (991 generation) models.
Sold each, Fits left and right side.
Fits:
For cars with PDK Transmission (dual clutch) - option code: 250
Porsche 991.2 Carrera 2 / 2S / GTS 2017 - 2021
Porsche 991.2 Carrera 4 / 4S / 4 GTS 2017 - 2021
Porsche 991.2 Targa 4 / 4S / 4 GTS 2017 - 2021
Diagram ref no 1
The rear drive shaft transfers engine torque from the differential to the rear wheel, allowing the vehicle to accelerate and maintain traction. The integrated CV joints enable smooth power delivery at varying angles as the suspension moves, ensuring consistent performance during acceleration, cornering, and over uneven road surfaces.
Function:
• Transfers rotational force from the differential to the wheel hub
• Allows suspension articulation via constant-velocity joints
• Maintains smooth, low-vibration power delivery Supports stable handling and drivetrain reliability
Worn CV joints or damaged boots can cause clicking noises, vibration under load, grease leakage, and uneven power delivery. Replacing a compromised axle with an OE Match quality drive shaft restores smooth drivetrain operation and helps protect related components such as wheel bearings and differentials.
Replace the drive shaft if you notice:
• Clicking or knocking noises when accelerating or turning
• Vibration or shudder under load
• Torn or leaking CV boots
• Excessive play detected during inspection
• During suspension, hub, or differential service revealing wear
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99133202462
99133202460
99133202461
99133202462
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
€1,044.06 inc. VAT
Now €939.65 inc. VAT
Orderable - 21 to 28 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information