OE Match

Front 1/4 light seal.

Fits:
Porsche 911 1977-94

Diagram Ref: 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90154292

The product you are viewing cross references to these numbers

Engine compartment sea, REAR

 

Fits:
Porsche 930 1975-89
Porsche 964 1989-94

Diagram Ref no: 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050417001

The product you are viewing cross references to these numbers

Bonnet / hood, front trunk rubber seal. 
This high-quality rubber seal is a direct-fit replacement for the front bonnet/hood aperture on the Porsche 911 1974–1989 models. The profile is shaped to match the original Porsche specification—including correct flange fitting and seal compression properties. Helps preserve factory appearance and correct sealing function in the front bonnet area.

Fits:
Porsche 911 1974 - 1989

Diagram ref no 2

A moulded rubber seal that fits around the bonnet opening, forming a tight barrier between the bonnet underside and the body-frame to prevent water, dust, and road noise from entering the engine bay or cabin area.

Over time, the original bonnet seal can become hardened, compressed, deformed or torn due to heat, weather and repeated bonnet operation. A degraded seal may lead to leaks, dirt ingress, engine bay moisture, increased noise or corrosion. Installing this fresh seal restores correct fit, sealing performance and helps maintain the original build quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91151192302

The product you are viewing cross references to these numbers

Door seal



Fits:
Porsche 928 1978-95 Coupe

Click 'Zoom in' for large parts diagram
Diagram Ref: 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92853734

The product you are viewing cross references to these numbers

Door seal, for Coupe models.



Fits:
Porsche 924 1976-85 Coupe
Porsche 924S 1986-88 Coupe
Porsche 944 1982-91 Coupe

Click 'Zoom in' for large parts diagram
Diagram Ref: 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94453709

The product you are viewing cross references to these numbers

Door seal.

Fits:
Porsche 993 1994-97 Coupe

Click 'Zoom in' for large parts diagram
Diagram Ref: 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96453109

The product you are viewing cross references to these numbers

Rear 1/4 panel to body seal.
Fits: Left and Right side



Fits:
Porsche 930 1978-89

Click 'Zoom in' for large parts diagram
Diagram Ref:

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050319700

The product you are viewing cross references to these numbers

Sunroof seal.

Fits:
Porsche 924 1977-88
Porsche 944 upto 1985

Diagram Ref: 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94456411401

The product you are viewing cross references to these numbers

Scuttle panel rubber 6.5mm
A 6.5 mm-wide rubber sealing strip that fits between the front wing/fender and the windscreen cowl panel. It replicates the factory “beading” profile to close the gap, keep water/debris out, and finish the edge cleanly.
Sold each, Fits Left or Right side

Fits:
Porsche 911 1984 - 1989
Porsche 964 1989 - 1994

Diagram Ref no. 5

Function: Seals and visually finishes the fender-to-cowl joint, reducing water ingress, preventing dirt accumulation and paint chafing, and maintaining OEM panel gaps/appearance.

Why & when to replace:
• Old beading shrinks, hardens, or cracks - gaps, squeaks, or paint rub.
• Whenever fenders are removed/refitted (paint or rust repair), or when refreshing exterior trims for a factory look.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91179950307

The product you are viewing cross references to these numbers

Door handle seal SMALL.
Price is for each.



Fits:
Porsche 924 1980-85
Porsche 924S 1986-88
Porsche 944 1982-91

Click 'Zoom in' for large parts diagram
Diagram Ref: 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

867837209

The product you are viewing cross references to these numbers

Rear valance to bumper seal.

Fits:
Porsche 911 1974-89

Diagram Ref 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150534503

The product you are viewing cross references to these numbers

Bumper bellow, Front. Corrugated corner rubber.
This bellow fits where the bumper's impact-absorbing tube meets the chassis mount. It replicates the original Porsche's form and function: the correct corrugated rubber profile, factory-style mounting holes, accurate dimensions, and the correct spacing between mounting tabs.


Porsche 911 1974 - 1989

Diagram ref no 42

• Position: Front bumper, left/right side impact-tube bellow (part number 91179950513/ 91179950514) – between bumper tube and chassis mount bracket.

• Function: Provides sealed flexible coupling between front bumper impact tube and chassis mount, absorbs minor movement/shock, prevents debris ingress, maintains correct bumper mounting geometry and fitment.

• Material & Construction: Corrugated rubber bellow manufactured to exact original Porsche profile, with correct mounting flange and bolt-hole spacing, designed for direct-fit replacement.

• Applications: Ideal when the original bellow is cracked, collapsed, missing, sagging, or has deteriorated rubber and no longer provides correct sealing or alignment.

Although often overlooked, the impact-bumper bellows play an important role in the structural and visual integrity of the bumper system. If the bellows are missing or worn, you may face:
• Rearranged or sagging bumper tube alignment
• Water or road-salt ingress into mounting areas, promoting corrosion
• Noticeable gaps or mis-alignment at bumper ends, affecting appearance
• Excess vibration or looser bumper feel due to degraded rubber

Replacing the bellow restores correct mounting geometry, prevents damage to the chassis or bumper tube, restores the original look and seals out elements.

When to replace:
•  The rubber is cracked, faded, sagged or missing
•  The bumper tube shows signs of corrosion or mis-alignment at the joint
•  During bodywork, restoration, bumper tube replacement, or mount servicing
•  You want to ensure authentic trim and correct condition for your classic Porsche

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9117995051

The product you are viewing cross references to these numbers

Rear over rider. European Spec

Fits:
Porsche 911 1984-89
Porsche 930 Turbo

Diagram Ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93050503

The product you are viewing cross references to these numbers

Rear bumper over rider. Rubber.

Fits:
Porsche 911 1974-83

Diagram Ref: 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150534

The product you are viewing cross references to these numbers

Front smile rubber fits on top of the bumper.

Fits:
Porsche 911 1974-89

Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150518705

The product you are viewing cross references to these numbers

Front bumper chrome moulding with impact rubber.
Narrow type 1/2 inch wide.

The front bumper chrome moulding with impact rubber is a direct-fit decorative and protective trim piece designed for the front bumper of classic Porsche 911 and 912 models (1965 – 73). This narrow-type moulding (½″ width) accurately replicates the factory profile, mounting hole spacing and chrome finish, incorporating a rubber insert to absorb minor impacts and protect the bodywork and finish.

Fits:
Porsche 911 1966 - 1973 (non S and RS)

Diagram ref no 2

•  Position on Vehicle: Front bumper — chrome moulding strip mounted across the bumper face, narrow style (half-inch width) with impact rubber insert.

• Applications: Ideal for restoration or repair of the front bumper trim where the original moulding is worn, corroded, missing or damaged, and where correct period appearance and trim quality matter.

The front bumper moulding serves both styling and practical roles: the chrome trim provides the classic look, while the rubber insert absorbs minor knocks and helps maintain the bumper edge finish. When the original moulding is faded, corroded, loose or missing, you may experience:
•  Visible gaps, mis-alignment or corrosion at the front bumper edge
•  Loss of protective rubber insert leading to chipped paint or damaged bumper edge
•  A less authentic appearance for a period correct vehicle
•  Difficulty sourcing correct mounting points or visible wear.

By replacing it with this moulding, you ensure the trim sits correctly, the finish is factory-correct, the protective rubber is present and the overall front bumper appearance and durability are restored.

When and why to replace:
•  Original moulding shows rust, pitting, bends, missing rubber insert or damaged ends
•  During front bumper replacement, bodywork respray or restoration project
•  Vehicle is being exhibited or resold and accurate period trim is desired
•  Loose or squeaking bumper trim indicates the rubber insert or mounting is worn

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150504132

The product you are viewing cross references to these numbers