OE Match

Door threshold side sills protectors black rubber.
Fits Left or Right Side



Fits:
Porsche 356 A / 356 B / 356 C

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64455111500

The product you are viewing cross references to these numbers

Air conditioning belt for factory York compressor AVP13x1155La.



Fits:
Porsche 911 Carrera 1984-1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99919225450

The product you are viewing cross references to these numbers

Water pump with gasket. The engine water pump plays a vital role in regulating your vehicle’s temperature by keeping coolant circulating throughout the engine. Over time, the pump’s internal bearings and seals can wear out, leading to noise, coolant leakage, and reduced cooling efficiency. One of the most common signs of a failing water pump is coolant dripping from the pump’s “weep hole,” indicating internal seal failure.



Fits:
Porsche 958 Cayenne 3.0L DIESEL 2012-18
Porsche 970 Panamera 3.0L DIESEL 2012-16 (model: CRCC 184kW / CRCB 155kW)
Porsche 95B Macan 3.0L S 2014>>

Signs of a Failing Engine Water Pump

• Coolant Leaking From the Weep Hole

Fluid coming from the weep hole is a strong indication that the pump’s internal seals have deteriorated.

• Excessive Play in the Pump Pulley

Movement or wobbling at the pulley shaft suggests a worn bearing, which can lead to pump failure.

• Squeaking or Chirping Noise at Idle

A failing bearing often produces high-pitched noises when the engine is idling.

• Engine Overheating

If the pump can’t circulate coolant properly, the engine may begin to overheat.

• Low Coolant Warning Light

A cooling system leak—often caused by a worn water pump—may trigger a low coolant alert on the instrument cluster.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95810603331

The product you are viewing cross references to these numbers

Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.




Porsche 928 1978- upto chassis number 92881 01800 (Rear Caliper)

Price shown is for each wire sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92861231303

The product you are viewing cross references to these numbers

Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.




For cars with Ceramic brake PCCB (I450)
Porsche 997.1 C2 / C2S 2005-08 FRONT
Porsche 997.2 C2 / C2S 2009-12 FRONT
Porsche 997.2 Carrera GTS / 4 GTS 2009-12 FRONT
Porsche 987.1 Boxster S 2005-08 FRONT
Porsche 987.2 Boxster S / Boxster Spyder 2009-12 FRONT
Porsche 987C.1 Cayman S 2005-08 FRONT
Porsche 987C.2 Cayman S / Cayman R 2009-12 FRONT

Price shown is for each wire sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99761267

The product you are viewing cross references to these numbers

Handbrake Cable Holder - Aluminium. Emergency brake, handbrake, hand brake cable holder for Porsche 356 A and Porsche 356 B between 1955 to 1963.

Fits:
Porsche 356A / 356B 1956-1963

Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35624308

The product you are viewing cross references to these numbers

Handbrake Cable, Rear

Fits:
Porsche 356 A/540.1
Porsche 356 B

Diagram Ref No 32

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64424238

The product you are viewing cross references to these numbers

Door check strap.
Fits: Left or Right

Old type design. Mount holes span 38mm centre to centre.

Fits:
Porsche 911 1965-73

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91153103700

The product you are viewing cross references to these numbers

Pedal rubber buffer. for Right Hand Drive cars only.
EACH.



Fits:
For RHD Cars
Porsche 911 1965-77
Porsche 911 Turbo 1975-77

Click 'Zoom in' for large parts diagram.
Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142352800

The product you are viewing cross references to these numbers

HD Transmission / gearbox mount bush
Sold individually, one per car.

Fits:
Porsche 964 / 993 C2 Only

High Density transmission mounts are the perfect compromise between stock rubber and our Semi-Solid mounts. Their heavy duty 25% higher durometer rubber construction makes them ideal for performance oriented cars but still allows absorption of vibrations and noise associated with solid mounts. Installs in stock transmission mount bracket replacing worn out factory rubber.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96437505581

The product you are viewing cross references to these numbers

Accelerator Cable 660mm



Fits:
Porsche 356 B-T6
Porsche 356 C

An accelerator cable arrangement through which an accelerator pedal and an engine carburetor are mechanically connected. The accelerator cable arrangement is composed of a cylindrical housing which is securely connected at its one end section with a pedal lever carrying the accelerator pedal.

Click 'Zoom in' for large parts diagram.
Diagram ref no 75

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

69542403102

The product you are viewing cross references to these numbers

HD Transmission / gearbox mount bush.
Sold individually, 1 bushing per car.

Fits:
Porsche 964 C4 Only

HD transmission mounts for your 964 C4 can provide significant performance benefits to any owner. These mounts are constructed from 25% stiffer rubber than stock, offering an RS comparable part at a fraction of the price. Thanks to their rubber construction, these mounts can offer these benefits all without significantly increased NVH. This makes them an ideal upgrade for those with worn original parts who want significantly improved shifter feel and weight transfer properties. All of these benefits come without making your car feel like a racecar like semi-solid or solid mounts tend to do. If you are going to be going through the effort of changing the transmission bushing, you definitely don't want to miss the chance to make this sensible, inexpensive upgrade.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96437505502

The product you are viewing cross references to these numbers

Handbrake pull handle double ribbed.



Fits:
Porsche 356 A/540.1

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64424215

The product you are viewing cross references to these numbers

Handbrake push rod.

Fits:
Porsche 356 / A 1950-59
Porsche 356B / Carrera 1600 GT

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3564219

The product you are viewing cross references to these numbers

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.



Fits:
Porsche 964 C2 / C4 - REAR INNER & OUTER
Porsche 964 C4 - FRONT INNER
Porsche 993 C2 / C4 - REAR INNER & OUTER
Porsche 993 C4 - FRONT INNER
Porsche 996 C2 / C4 / Turbo / GT2 / GT3 - REAR INNER & OUTER
Porsche 997 Turbo / GT2 / GT3 - REAR INNER & OUTER
Porsche 986 2.5/2.7L/3.2L >>2002 - INNER & OUTER
Porsche 986 3.2L 2003>> - TIPRONIC INNER & OUTER

Porsche 986 3.2L 2003>> - MANUAL OUTER

Please note: the rubber boot may come with metal flange. The flange may not necessarily fit your model. Please remove the rubber boot and transfer onto existing shaft. This product is not advertised as WITH the metal flange.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833229302

The product you are viewing cross references to these numbers