OE Match

Door hinge plate/pad, Tin



Fits:
Porsche 911 2.0-3.3 01/63-07/89
Porsche 912 1.6 01/65-02/70
Porsche 964 3.3-3.6 12/88-06/94
Porsche 993 3.6-3.8 10/93-09/97

Click 'Zoom in' for large parts diagram.

Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153139120

The product you are viewing cross references to these numbers

T-Headed screw for Rear lid grille. 6 per grille. Sold each.

Fits:
Porsche 911 2.7-3.2 08/1973-07/1989
Porsche 959 2.8 01/1986-04/1991

Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155943300

The product you are viewing cross references to these numbers

Striker plate for door.
Also fits 1973-89 models, but originally they were yellow chromated.



Fits:
Porsche 911 2.0L-2.4L 05/1966-07/1972

Click 'Zoom in' for large parts diagram.
Diagram ref no 14.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153170

The product you are viewing cross references to these numbers

Coolant bottle / Reservoir tank, Comes with black bleeder valve.
Coolant expansion (overflow) tank for the Boxster cooling system. It serves as the reservoir for excess coolant from the radiator, allowing coolant to expand when hot and contract when cooled - keeping the system at correct pressure and preventing overflow or coolant loss.

Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987.1 Boxster 2005 - 2006

Diagram ref no 7

Replace the coolant expansion tank when you notice coolant leaks, hairline cracks, or white residue forming around the tank seams. If the tank becomes discoloured, brittle, or begins to deform from heat, it can no longer maintain proper pressure. Any signs of coolant smell in the rear trunk area, fluctuating coolant levels, or overheating symptoms also indicate the tank should be replaced.

Why replacement matters:
• Prevents coolant leaks that can cause overheating or engine damage
• Restores proper cooling-system pressure and fluid volume
• Stops air from entering the cooling system, which can lead to hot spots and poor circulation
• Prevents unexpected tank failures caused by old, brittle plastic
• Ensures clean, stable coolant flow for long-term engine reliability

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610614708

The product you are viewing cross references to these numbers

Coolant expansion tank bottle.
Also called a coolant reservoir bottle, that’s responsible for collecting excess engine coolant and maintaining proper fluid levels within the cooling system as temperatures change. 

Fits:
Porsche 996 C2 / C4 1997 - 2000
Porsche 996 GT3 MKI 1997 - 2000

Diagram ref no 1

The expansion tank allows coolant to expand as it heats up and then returns it back to the cooling system once the engine cools, helping maintain correct pressure and fluid volume. It also provides a convenient point for coolant level checks and top-ups when needed.

Function:
•  Pressure/regulation: Manages thermal expansion of coolant to prevent overheating or coolant loss.
•  Containment: Acts as a buffer to capture overflow and maintain stable coolant levels as the engine cycles through temperature changes.
•  Durability: Engineered from heat-resistant materials that withstand prolonged thermal and mechanical stresses.

Over time, factory coolant expansion tanks become brittle and can develop cracks, leaks, or deformation due to heat cycles and coolant chemicals. A compromised reservoir can lead to coolant loss, loss of system pressure, and overheating - which in turn can damage your engine if ignored. Replacing tank restores proper coolant containment and helps preserve engine reliability and longevity.

Replace your coolant expansion tank if you observe any of the following:
•  Visible cracks, leaks or coolant seepage around the tank.
•  Coolant levels that fluctuate unexpectedly.
•  Plastic has become brittle, discoloured, warped or swollen.
•  Pressure issues or frequent coolant top-ups are required.
•  Any signs of coolant residue or stains around the engine bay.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610614756

The product you are viewing cross references to these numbers

Pinion Shaft Bearing for Type 644, 716, 741, and 915 Transmissions



Fits:
Porsche 356 / 356A 1950-59 (G 11 001 >> 25 000)
Porsche 356 / 356A 1950-59 (716/0/1/2/3, 716/4/5)
Porsche 356B / 356C 1960-65
Porsche 911 SC / Carrera 1974-86

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91530239906

The product you are viewing cross references to these numbers

Door stop. Fits left and right side. This door stop was NLA for a long time, untill now ! No exchange part, it's a complete and brand new product. CNC machined, laser cut and zinc-plated.



Fits:
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91453103710

The product you are viewing cross references to these numbers

Fuel pump.



Fits:
Porsche 955 Cayenne MKI 2003-06
Porsche 957 Cayenne MKII 2007-10 (not Diesel)

This product supersedes Porsche's old part numbers:
- 95562010301 (LEFT) / 95562010321 (RIGHT)
- 95562010302 (LEFT) / 95562010322 (RIGHT)
- 95562010303 (LEFT) / 95562010323 (RIGHT)

PLEASE NOTE: You may need a small adaptor pipe to go with this new design fuel pump. The adaptor part numer is 95562091100

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95562093

The product you are viewing cross references to these numbers

The Porsche Panamera engine mounts play a crucial role in keeping the engine and transmission securely connected to the frame or sub-frame. They provide stable support while minimizing vibrations that could otherwise transfer into the cabin. Properly functioning engine mounts help maintain drivetrain alignment, ensuring smooth performance and preventing premature wear on other components.

Over time, engine mounts can wear out or deteriorate due to heat, stress, and age. When this happens, you may experience increased engine noise, excessive vibration, and noticeable engine movement — all signs that your mounts need replacement. Replacing worn mounts restores comfort, stability, and overall driving enjoyment.

Fits:
Panamera MKI 3.6L V6
Panamera MKII 3.6L V6

Common Symptoms of Engine Mount Failure

• Excessive engine vibration
• Noticeable drivetrain vibration
• Uneven engine alignment or sagging
• Engine rocking or movement during gear changes
• Engine shifting or jerking when braking

Click 'Zoom in' for large parts diagram.
Diagram ref no 5 (LEFT) and 6 (RIGHT).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94637505

The product you are viewing cross references to these numbers

Engine mount.



Fits:
Porsche 970 Panamera S 2011-13
Porsche 970 Panamera GTS / Turbo 2011-16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94837505

The product you are viewing cross references to these numbers

Replacement Water Pump with gasket.



Fits:
Porsche Cayenne 955 4.5L V8 S or Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810601104

The product you are viewing cross references to these numbers

Engine mount for Porsche 997 GEN1 / 997 MKII COUPE
Hydraulic engine mounts are designed to securely connect the engine to the chassis while damping vibration. It’s essential for smooth ride quality and protecting drivetrain components from stress Compatible with variants including Carrera, Turbo, and their S derivatives—excluding models equipped with Porsche Active Driveline Mounts (PADM).
Sold each, 2 required per vehicle.

Fits:
Porsche 997 MKI Carrera 2005>> COUPE
Porsche 997 MKI Turbo 2005>> COUPE

Porsche 997 MKII Carrera 2009>> COUPE
Porsche 997 MKII Turbo 2009>> COUPE without PADM (dynamic engine mounts)

Diagram Ref No 2.

The Mount for the Porsche 997 Generation 1 and Generation 2 Coupe (Porsche product code 99737504908) serves as a critical component that secures the engine to the vehicle's chassis. It helps to absorb vibrations and impacts from the engine during operation, maintaining stability and ensuring a smooth ride. This particular engine mount is designed to meet the specific structural and performance requirements of the Porsche 997, providing durability and reliability for both everyday driving and performance enhancements. Proper functioning of the engine mount is essential for optimal engine performance and to minimize wear on other related components.

• Position on Vehicle: Front engine mount assembly (left OR right side) – front of the engine block, attaching to the chassis via mount bracket.
• Cross-Reference / Alternative Numbers: OEM: 997 375 049 08; also superseded from 997 375 049 04 and 997 375 049 06 in earlier listings.
•  Applications: Use this mount when original mount shows signs of failure — to restore engine stability, reduce vibration, maintain correct engine alignment and safeguard ancillary components.

An engine mount  plays a vital role in stabilising the powertrain and isolating engine-borne vibration from the cabin and chassis. Over time the hydraulic fluid, rubber bushings or bonding will degrade, causing increased engine movement, vibration, noise or premature wear of transmission and drivetrain components. Replacing a suspect mount restores comfort, handling precision and engine/gearbox alignment.

When and why to replace:
• Noticeable engine vibration, rumble or harshness in the cabin or at idle.
• Visual signs of mount wear: cracked rubber, leaking fluid, broken bracket.
• After engine removal, major service or performance upgrades (making access easier).
• High-mileage vehicle where original mounts are likely ageing and losing damping capability.
• Preventive replacement before mount failure protects drivetrain components and avoids costly collateral damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99737504908

The product you are viewing cross references to these numbers

Brake pedal return spring for LHD Cars

Fits:
Porsche 911 1965-76 (Manual transmission)
Porsche 930 Turbo 3.0L 1975-77 (Manual transmission)
Porsche 914 1970-76 (Manual transmission)

Diagram ref no 46

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142353100

The product you are viewing cross references to these numbers