Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
About OE Match
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.
OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.
WATERPUMP.996.1.OEM
Product Information
Water pump comes with a gasket and METAL impeller.
Fits:
Porsche Boxster 1997-04 cars with aircon
Porsche 996 C2/4 1997-04 cars with aircon
*if your car has no aircon you will have to swap the drive belt to part number 99610215165. You can edit all products in your basket.
Water pump kit with drive belt and standard temperature thermostat. Kit comes with all bolts and gasket needed to complete the job. Please note we advise to get additional antifreeze (approx 6 litres). Available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996.1.OEM
The product you are viewing cross references to these numbers
Product Information
Water pump kit with belt and thermostat. Water pump comes with a gasket and METAL impeller.
Fits:
Porsche Boxster 1997-04 cars with aircon
Porsche 996 C2/4 1997-04 cars with aircon
*if your car has no aircon you will have to swap the drive belt to part number 99610215165. You can edit all products in your basket.
Water pump kit with drive belt and standard temperature thermostat. Kit comes with all bolts and gasket needed to complete the job. Please note we advise to get additional antifreeze (approx 6 litres). Available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996.1.OEM
99610601155
996.106.11.55
99610601156
99610601157
99610215166
99610632650
99610601360
99610601151
99610601153
99610601154
99610601361
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Water pump drive belt for cars WITH Aircon. Porsche 996 / Boxster 986/997 (99610215168/3
1 x Water pump. Porsche Boxster 986 / 996 C2 / 996 C4 (non Turbo) (99610601157/8
1 x Water thermostat housing with thermostat insert. Porsche 987 Boxster / 987C Cayman / 997 (99610601361/2
4 x Screw, Hex Head M 6 x 20 (90037803001
5 x Bolt, Hex Head M6 x 25. Porsche 928 / 970 Panamera / 958 Cayenne (90037801301/1
2 x M6 x 30 Hex. Head Bolt for Porsche 986 / 987-1 / 993 / 996 / Carrera GT (90037817701/1
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
£189.60 inc. VAT
Now £170.98 inc. VAT
In Stock - 24 Hour Dispatch
90142302705/1
Product Information
Fits:
Porsche 911 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90142302705
The product you are viewing cross references to these numbers
Product Information
Throttle linkage reverse lever. Includes bell crank lever and 2 bushings. Located on transmission.Fits:
Porsche 911 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90142302705
90142302703
90142302705
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£75.00 inc. VAT
Now £67.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90155509
Product Information
Fits:
Porsche 911 1969-61 TARGA
Diagram ref no 17
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90155509
The product you are viewing cross references to these numbers
Product Information
Rear 1/4 window top inner strip.Fits:
Porsche 911 1969-61 TARGA
Diagram ref no 17
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90155509
90155509143
90155509243
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Select below
Prices from: £116.10 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
827723511B/1
Product Information
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
This product supersedes Porsche's old part numbers:
- 827723511A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
827723511B
The product you are viewing cross references to these numbers
Product Information
Pedal rubber accelerator. Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
This product supersedes Porsche's old part numbers:
- 827723511A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
827723511B
827723511A
827723511B
827723511A
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
£18.95 inc. VAT
Now £17.05 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99642414501/1
Product Information
Fits:
Porsche 986 Boxster 2000>>
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Porsche 996 2000>>
Porsche 996 Turbo / GT2
Porsche 997 MKI & MKII 2005>>
Porsche Carrera GT
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99642414501
The product you are viewing cross references to these numbers
Product Information
Gear linkage cable end. P Manual Cars Fits:
Porsche 986 Boxster 2000>>
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Porsche 996 2000>>
Porsche 996 Turbo / GT2
Porsche 997 MKI & MKII 2005>>
Porsche Carrera GT
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99642414501
99642414501
61143029001
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Carrera GT
£15.00 inc. VAT
Now £13.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99634379217/1
Product Information
This replacement front stabilizer bar bush also called anti-roll bar bearing bracket mount, is built to match original specs. It fits the front anti-roll / stabilizer bar. Anti-roll bar bushing restores stability, reduces noise, and ensures precise handling.
Fits:
Porsche 986 Boxster S 3.2L 2000>>
* Cars with Sport-type chassis
Porsche 987.1 Boxster 2005 - 2008
* Cars with standard chassis and Manual Transmission
Porsche 987.1 Boxster / S 2005 - 2008
* Cars with PASM (electronic damper control)
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2005 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Porsche 996 TARGA 2002>>
* Cars with Sport-type Chassis (M030) and Tiptronic Transmission (M249)
Porsche 997.1 C2 CABRIO / COUPE 2005 - 2008
* Cars with Standard Chassis (I029) and 6-speed manual transmission (I480)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634379217
The product you are viewing cross references to these numbers
Product Information
Stabilizer bar bush, Front. 24mmThis replacement front stabilizer bar bush also called anti-roll bar bearing bracket mount, is built to match original specs. It fits the front anti-roll / stabilizer bar. Anti-roll bar bushing restores stability, reduces noise, and ensures precise handling.
Fits:
Porsche 986 Boxster S 3.2L 2000>>
* Cars with Sport-type chassis
Porsche 987.1 Boxster 2005 - 2008
* Cars with standard chassis and Manual Transmission
Porsche 987.1 Boxster / S 2005 - 2008
* Cars with PASM (electronic damper control)
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.1 Cayman 2005 - 2008
Porsche 987C.2 Cayman 2009 - 2012
Porsche 996 TARGA 2002>>
* Cars with Sport-type Chassis (M030) and Tiptronic Transmission (M249)
Porsche 997.1 C2 CABRIO / COUPE 2005 - 2008
* Cars with Standard Chassis (I029) and 6-speed manual transmission (I480)
Porsche 997.1 C2S COUPE 2005 - 2008
* Cars with Sport-type Chassis (I030)
Porsche 997.1 C2/C2S COUPE / CABRIO 2005 - 2008
* Cars with PASM (electronic damper control) (I475)
Porsche 997.2 C2 COUPE / CABRIO 2009 - 2012
* Cars with Standard Chassis (I029) and PDK Transmission (I250)
Porsche 997.2 C2/C2S COUPE 2009 - 2012
* Cars with Sport-Type Chassis (I030)
Porsche 997.2 C2/C2S COUPE/CABRIO 2009 - 2012
* Cars with PASM (electronic damper control) (I475)
Diagram Ref No 2.
What stabilizer bar bush does:
• Cushions and secures the stabilizer (anti-roll) bar to the chassis, reducing vibration and road noise
• Helps maintain proper sway bar function by allowing the bar to pivot while minimizing unwanted movement
• Preserves handling precision and vehicle stability during cornering by preventing excessive body roll.
Over time, bushings can harden, crack, or deteriorate, which leads to play in the stabilizer bar mount, increased noise, sloppy handling, or even suspension misalignment. Replacing bushing restores correct stiffness, reduces unwanted vibration or sway, and helps preserve the original handling characteristics of the vehicle.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634379217
99634379217
00004450022
414 615 0003
4146150003
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
£14.00 inc. VAT
Now £12.60 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99633379228/1
Product Information
Size: 19.2mm
Fits:
Porsche 986S Boxster 3.2L 1997-04 - Please choose by size
Porsche 987 Boxster - Cars with standard suspension
Porsche 987C Cayman
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633379228
The product you are viewing cross references to these numbers
Product Information
Stabilizer Bar Bush Rear Price is eachSize: 19.2mm
Fits:
Porsche 986S Boxster 3.2L 1997-04 - Please choose by size
Porsche 987 Boxster - Cars with standard suspension
Porsche 987C Cayman
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633379228
99633379228
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
£14.00 inc. VAT
Now £12.60 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
99633379225/1
Product Information
It’s a suspension rubber mount that fits around the anti-roll bar to secure it to the rear axle and help control chassis movement.
Sold each.
Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L 1997 - 2005 Cars with Sport Suspension - Please choose by size
Porsche 987.1 Boxster 2005 - 2008 Cars with Sport Suspension
Porsche 996 C2 / C4 / C4S 1998 - 2005 *Cars with Sport Suspension - Please choose by size
Porsche 997.1 C2 / C2S / C4 / C4S 2005 - 2008 - Please choose by size
Diagram Ref No 2.
• Application: Rear anti-roll (stabilizer) bar bushing - fits around the 19.8 mm diameter stabilizer bar to mount it to the rear suspension subframe. Two bushings (left and right) are typically required per vehicle.
The anti-roll bar bushing cushions and secures the stabilizer bar to the rear suspension structure. This part helps maintain the correct position and movement control of the rear anti-roll bar, reducing unwanted body roll in corners and stabilizing the chassis during acceleration, braking, and steering.
Over time, the factory rubber in anti-roll bar bushings can harden, crack, or break down due to heat, age, and load cycles. Worn bushings can lead to:
• Increased body roll and reduced handling precision
• Clunking or knocking noises from the rear suspension
• Uneven tire wear
• Loose or sloppy cornering response
Replacing bushings restores correct fitment and suspension geometry, improving stability, road feel, and overall driving confidence. Spyder Performance
Replace the rear anti-roll bar bushings if you notice:
• Clunking or rattling from the rear suspension
• Excessive body lean when cornering
• Visible cracks, distortion, or missing rubber on existing bushings
• During suspension overhaul or anti-roll bar removal
• Elevated noise or vibration through the rear of the car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633379225
The product you are viewing cross references to these numbers
Product Information
Rear stabilizer bar bush, Size: 19.8mmIt’s a suspension rubber mount that fits around the anti-roll bar to secure it to the rear axle and help control chassis movement.
Sold each.
Fits:
Porsche 986 Boxster 2.5L / 2.7L / 3.2L 1997 - 2005 Cars with Sport Suspension - Please choose by size
Porsche 987.1 Boxster 2005 - 2008 Cars with Sport Suspension
Porsche 996 C2 / C4 / C4S 1998 - 2005 *Cars with Sport Suspension - Please choose by size
Porsche 997.1 C2 / C2S / C4 / C4S 2005 - 2008 - Please choose by size
Diagram Ref No 2.
• Application: Rear anti-roll (stabilizer) bar bushing - fits around the 19.8 mm diameter stabilizer bar to mount it to the rear suspension subframe. Two bushings (left and right) are typically required per vehicle.
The anti-roll bar bushing cushions and secures the stabilizer bar to the rear suspension structure. This part helps maintain the correct position and movement control of the rear anti-roll bar, reducing unwanted body roll in corners and stabilizing the chassis during acceleration, braking, and steering.
Over time, the factory rubber in anti-roll bar bushings can harden, crack, or break down due to heat, age, and load cycles. Worn bushings can lead to:
• Increased body roll and reduced handling precision
• Clunking or knocking noises from the rear suspension
• Uneven tire wear
• Loose or sloppy cornering response
Replacing bushings restores correct fitment and suspension geometry, improving stability, road feel, and overall driving confidence. Spyder Performance
Replace the rear anti-roll bar bushings if you notice:
• Clunking or rattling from the rear suspension
• Excessive body lean when cornering
• Visible cracks, distortion, or missing rubber on existing bushings
• During suspension overhaul or anti-roll bar removal
• Elevated noise or vibration through the rear of the car
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633379225
99633379225
99633379219
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
£14.00 inc. VAT
Now £12.60 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95111613300/1
Product Information
Fits:
Porsche 924 Turbo 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Click 'Zoom in' to see the diagram.
Diagram Ref No 16.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95111613300
The product you are viewing cross references to these numbers
Product Information
Clutch fork shaft.Fits:
Porsche 924 Turbo 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95
Click 'Zoom in' to see the diagram.
Diagram Ref No 16.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95111613300
95111613300
93111613301
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
£29.00 inc. VAT
Now £26.10 inc. VAT
In Stock - 3- 5 Days Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91161331203/1
Product Information
Fits:
For cars without cruise control
Porsche 911 1974-89
Porsche 911 (930) 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161331203
The product you are viewing cross references to these numbers
Product Information
Steering column cover, Lower.Fits:
For cars without cruise control
Porsche 911 1974-89
Porsche 911 (930) 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161331203
91161331203
91161331200
91161332800
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£45.00 inc. VAT
Now £40.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
91161309902/1
Product Information
Fits:
For cars without cruise control
Porsche 911 1974-89
Porsche 911 (930) 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 19
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161309902
The product you are viewing cross references to these numbers
Product Information
Steering column cover, Upper.Fits:
For cars without cruise control
Porsche 911 1974-89
Porsche 911 (930) 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 19
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161309902
91161309902
91161309900
011425
91161332800
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£45.00 inc. VAT
Now £40.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90142455701/1
Product Information
Fits:
Porsche 911 1969-89 All
Diagram ref no 49
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90142455701
The product you are viewing cross references to these numbers
Product Information
Handbrake cable spacer tube.Fits:
Porsche 911 1969-89 All
Diagram ref no 49
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90142455701
90142455701
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£17.50 inc. VAT
Now £15.75 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
95862804000KIT
Product Information
Material: PBT, GRP (Glass fibre Reinforced Plastic)
Fits:
Porsche 958 Cayenne 2011 - 2018
This kit replicates the factory geometry and finish of the original Porsche rear wiper assembly for Cayenne / 958 series models. The arm features proper length, pivot design, and mounting interface, while the blades match factory curvature and connection style for precise wipe coverage. Together, they restore full rear-window wiper functionality with compatible parts in one purchase.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95862804000KIT
The product you are viewing cross references to these numbers
Product Information
Rear wiper arm with cap and integrated wiper blade. Material: PBT, GRP (Glass fibre Reinforced Plastic)
Fits:
Porsche 958 Cayenne 2011 - 2018
This kit replicates the factory geometry and finish of the original Porsche rear wiper assembly for Cayenne / 958 series models. The arm features proper length, pivot design, and mounting interface, while the blades match factory curvature and connection style for precise wipe coverage. Together, they restore full rear-window wiper functionality with compatible parts in one purchase.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95862804000KIT
95862804000
95862805000
95862805002
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
£27.50 inc. VAT
Now £24.75 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90162892SET
Product Information
Set Of 4.
Fits:
For Cars With Windshield Wiper
Porsche 911 F / G / 964
Porsche 912
Porsche 914
Porsche 924
Porsche 944 (1981 - 1985)
Porsche 928 (1977 - 1986)
This set of two upper and two lower sealing ring is used to seal the wiper linkage and is a high quality choice to the outpriced original.
Diagram Ref No 7 And 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90162892SET
The product you are viewing cross references to these numbers
Product Information
Sealing Rings For Porsche Wiper Linkage.Set Of 4.
Fits:
For Cars With Windshield Wiper
Porsche 911 F / G / 964
Porsche 912
Porsche 914
Porsche 924
Porsche 944 (1981 - 1985)
Porsche 928 (1977 - 1986)
This set of two upper and two lower sealing ring is used to seal the wiper linkage and is a high quality choice to the outpriced original.
Diagram Ref No 7 And 8
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90162892SET
90162892301
1128
90162892400
9220310
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 914 (1970-1976)
£19.90 inc. VAT
Now £17.91 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
477711205D/2
Product Information
Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
The old shifters use by lack of storage on the pin off sharply and cause an enormous switching game when changing in the shift gate.
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477711205D
The product you are viewing cross references to these numbers
Product Information
Gearshift lever. Porsche 924 / 924S / 944 Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
The old shifters use by lack of storage on the pin off sharply and cause an enormous switching game when changing in the shift gate.
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
477711205D
477711205D
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
£43.00 inc. VAT
Now £38.70 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
90153106
Product Information
Fits:
Porsche 911 - 1965 to 1967
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90153106
The product you are viewing cross references to these numbers
Product Information
Door handle with lock cylinder and key, Chrome.Fits:
Porsche 911 - 1965 to 1967
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90153106
90153106120
90153106220
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Select below
Prices from: £85.18 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information