OE Match

Water tank reservoir cap & hose.
Direct-fit washer bottle cap with integrated hose for classic Porsche 356, 911 and 912 models. Restores proper sealing and fluid delivery, preventing leaks and contamination in the windshield.

Fits:
Porsche 356 B/C 1.6 01/1959 - 12/1965
Porsche 911 2.0 01/1963 - 07/1968
Porsche 912 1.6 01/1965 - 07/1968

Diagram ref no 3

• Position on Vehicle: Mounted at the top of the washer fluid reservoir (windshield washer tank) in the front compartment or accessory bay; includes the attached hose for correct routing and connection.

• Applications: Ideal for use when the original cap is cracked, missing, leaking washer fluid, or when restoring the original appearance and function of the windshield washer system on a classic Porsche.

A properly functioning washer system cap ensures the washer fluid tank remains sealed, preventing contamination or evaporation and allowing the system to maintain correct pressure and fluid delivery when you need to clean your windshield. A cracked or missing cap can allow debris or moisture into the system, cause fluid leakage, or reduce washer effectiveness - critical during poor weather conditions or for safe driving. Replacing cap restores function, prevents failures and preserves the original system integrity.

When and why to replace:
• Washer fluid leaks from the reservoir cap or hose connection.
• Cap shows visible cracks, warping, or the hose connection is loose or detached.
• During restoration or servicing of the washer system when the original cap is removed.
• If the washer tank or hose has been replaced and original cap is missing or the seal has aged.
• For collectors looking to maintain correct original component appearance and function.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162872320

The product you are viewing cross references to these numbers

Door stay reinforcement kit (each)

Fits:
Porsche 911/912/930/964 1970-94

One of the weaker parts of your classic 911 is the sheet metal surrounding the door stay. The door stay mechanism often tends to tear and rip the sheet metal inside the door over many year of use, damaging both the door and also potentially the fender. Luckily a solution that will protect those precious doors on your 911, and save them if they have already taken on some damage. Right Click and Save As to view the installation instructions.

*Please note that some doors will be so severely damaged that the kit might not be able to save them and a replacement door will be needed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91153195700

The product you are viewing cross references to these numbers

Brake line kit. 1 circuit brake system. SET OF 10.



Fits:
Porsche 911 2.0 01/1963-07/1968 RHD Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1661500810

The product you are viewing cross references to these numbers

Brake line kit. 1 circuit brake system. MUST be hand formed. SET OF 9.



Fits:
Porsche 911 2.0-2.7 08/68-07/75 RHD Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1661500710

The product you are viewing cross references to these numbers

Intermediate steering shaft with joint for LHD Cars. Left hand drive.

Fits:
For LHD Cars only
Porsche 911 2.0-3.3 08/68-07/89
Porsche 912 1.6 08/68-02/70

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134721102

The product you are viewing cross references to these numbers

Bushings set with instructions:  
Includes 4x Heavy Duty rubber softness spring plate bushings  (w/ 80-85 shore A)

Outer dia: 75mm
Inner dia: 48mm
Thicknes: 42mm

Fits:
Porsche 911 1968-89
Porsche 912 1968-69
Porsche 912 1976
Porsche 930 1978-79

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133300900BHD

The product you are viewing cross references to these numbers

Bushings set with instructions:  
Includes 4x Standard rubber softness spring plate bushings  (w/ 55-60 shore A)



Outer dia: 75mm
Inner dia: 48mm
Thicknes: 42mm

Fits:
Porsche 911 1968-89
Porsche 912 1968-69
Porsche 912 1976
Porsche 930 1978-79

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133300900B

The product you are viewing cross references to these numbers

Jack receiver socket. Porsche 911 1974-89



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150119500

The product you are viewing cross references to these numbers

Camshaft Cover LOWER. The engine valve cover—also known as a rocker cover—is a vital component that seals the top of the engine’s cylinder head. It protects the valves and valve train components from dirt, debris, and contaminants while helping to prevent oil leaks.

In many modern engines, the valve cover also integrates parts of the PCV (Positive Crankcase Ventilation) system, including the PCV valve itself. This design helps manage crankcase pressure and ensures proper ventilation of engine gases for optimal performance.

Fits:
Porsche 993 (911) C2 1994-97
Porsche 993 (911) C4 1994-97
Porsche 993 (911) RS 1994-97
Porsche 993 (911) C2S 1994-97
Porsche 993 (911) C4S 1994-97

Common Engine Valve Cover Failure Symptoms

• ·         Aging and Wear: Over time, valve cover gaskets can harden, shrink, or crack, leading to oil leaks and burning oil smells coming from the engine.
• ·         Improper Installation: Uneven torque or incorrect gasket placement during installation can cause leaks and sealing issues.
• ·         Material Fatigue: Constant exposure to high engine temperatures can cause plastic or metal covers to warp or crack.
• ·         Blocked PCV Valve: A clogged PCV system can cause excess crankcase pressure, potentially damaging the valve cover or gasket.

Click picture for large parts diagram.
Diagram Ref No 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99310511607

The product you are viewing cross references to these numbers

Convertible top drive cable.
This convertible top drive cable is a precision-engineered replacement that links the power-top motor to the drive shafts, ensuring smooth, synchronized roof movement on Porsche 911 (964 / 993) models. It maintains proper tension and alignment to prevent roof jamming or uneven operation.

Fits:
Only for cars with dual cable drive motors.
Porsche 911 1986 - 1989 Cabrio
Porsche 964 1989 - 1994 Cabrio
Porsche 993  >>1995 only Cabrio

For 993 1996 onwards you will need 99356192102 and 99356192202

Diagram Ref: 11

Over time the original cable may stretch, fray, or degrade due to repeated use, exposure to weather and tension cycling—resulting in roof mis-alignment, jamming, or uneven operation.

When replacement matters:
•  If the convertible top motors run but the roof doesn’t move symmetrically or stops in mid-travel.
•  After roof mechanism overhaul, motor replacement or if the existing cable shows damage.
•  As part of a full roof service or restoration to restore factory precision and reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99356192

The product you are viewing cross references to these numbers

Seat belt receptacle cover kit
Includes:
1x buckle cover for the top,
1x buckle cover for the bottom
1x knob
1x adjuster cover.

Please note: Small piece of plastic at the bottom of the stalk cover will need to be trimmed off in order to fit the stalk properly and clamp 2 pieces together.

Fits:
Porsche 911 1969-1973
Porsche 912 1969
Porsche 914 1970-1972

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90180301

The product you are viewing cross references to these numbers

Gasket for Luggage / Engine compartment lamp.
This gasket fits around the luggage-compartment or engine-compartment lamp housings. The perfect sealing interface prevents moisture, dust and debris from entering the lamp unit or cavity, maintaining both mounting integrity and appearance.

Fits:
Porsche 911 1965 - 1988
Porsche 911 (930) Turbo 1975 - 1988

Diagram ref no 47

• Application: Gasket for luggage-compartment or engine-bay lamp housings in Porsche models
• Replacement style: OE Match direct-fit seal with correct material and dimensions
• Function: Sits between the lamp housing (in the boot or engine bay) and the body panel or lamp bezel, creating a tight seal. Protects the lamp assembly and surrounding area from water ingress, corrosion and dust contamination. Maintains factory-spec sealing to preserve illumination clarity and body integrity.

Over time, the original gasket can harden, shrink, deform or crease due to heat cycles, exposure to engine bay conditions, or age. A compromised seal can result in fogged lamp lenses, rust around the housing or leaking that affects electrical connections. Installing the fresh gasket restores the correct fit and ensures long-term protection and serviceability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163229100

The product you are viewing cross references to these numbers

Fuse box, original bakelite type.

Fits:
Porsche 356 A/B/C 1.5-1.6 01/55-12/65

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64461280100

The product you are viewing cross references to these numbers

Brake pad wear sensors help to indicate if your brake pads need changing. These should normally be replaced when replacing your brake pads.

This sensor has a Single pad sensor which is different to the OE Sensor that has a double pad sensor. This will still work as standard by connecting this to any one single pad. 

Fits Left or Right / Price is Each 
Porsche 991 C2 / C4 2012>> (FRONT CALIPER)
Porsche 981 Boxster 2.7L / Boxster S 3.4L 2012>> (FRONT CALIPER)
Porsche 981C Cayman 2.7L / Cayman S 3.4L 2013>> (FRONT CALIPER)
Porsche 718 Cayman /Boxster 718 (FRONT CALIPER)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99160916500

The product you are viewing cross references to these numbers

Door contact switch. Door activator switch for the interior lights.



Fits:
Porsche 356 B T6 / 356 C 1.6 08/62-12/65
Not for Roadster

Click 'Zoom in' for large parts diagram.
Diagram ref no 65

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64461560106

The product you are viewing cross references to these numbers

Door contact switch.



Fits:
Porsche 356 (1950 to 1959) with VIN
F 100 001>> (Coupé),
F 61 701>> (Cabriolet)
F 83 201>> (Speedster)
Porsche 356 B-T5 (1960 to 1965)

Click 'Zoom in' for large parts diagram.
Diagram ref no 65

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64461560100

The product you are viewing cross references to these numbers