OE Match

Rear main oil seal - crank rear.
Fitting Position: Transmission End, Inner Diameter: 90 mm, Outer diameter: 110 mm, Width: 12 mm, Radial Shaft Seal Design.



Fits:
Porsche 911 3.0L 1978-83
Porsche 911 3.2L 1984-89
Porsche 930 Turbo 1975-89

Click 'Zoom in' for large part diagram.
Diagram Ref No 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99911342641

The product you are viewing cross references to these numbers

Voltage Regulator for Alternator.
Located on the back of the alternator.

Fits:
Porsche 924 CS "Club Sport" M637 1988-91

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92860315300

The product you are viewing cross references to these numbers

Oil filter with gasket for cars with tiptronic gearbox.

Transmission Oil Filter – Part ref No. 986 307 403 00

This precision-engineered transmission oil filter is designed to keep your Porsche’s gearbox operating smoothly. It traps harmful contaminants before they can enter the transmission’s valve body and fluid passages, protecting sensitive components from wear and damage. By maintaining clean transmission fluid, it helps prevent shifting problems such as delayed engagement, harsh gear changes, and overall performance decline.

Fits:
Porsche 986 Boxster 1997-04 Tiptronic
Porsche 987 Boxster 2005-08 Tiptronic
Porsche 987C Cayman 2007>> Tiptronic

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98630740300

The product you are viewing cross references to these numbers

Steering rack gaiter.
Length: 126mm, Inner diameters: 25mm / 39mm

This steering rack bellows is a direct-fit boot designed to cover and protect the rack and pinion assembly of the vehicle’s steering system. It replicates the original boot’s dimensions, material hardness, and sealing characteristics to ensure correct fitment, full coverage, and long-lasting protection.

Fits:
Porsche 924 1976-86 Fits Left Side Manual Rack
Porsche 924s 1986-88 Fits Left Side Manual Rack
Porsche 944 1982-85 Fits Left Side Manual Rack
Porsche 944S2 1985-88 Fits Left Side Manual Rack

Porsche 924S 1986-88 Fits Left and Right Power Steering rack
Porsche 944S2 1985-91 Fits Left and Right Power Steering rack
Porsche 968 1992-95 Fits Left and Right Power Steering rack
Porsche 993 1994-98 Fits Left and Right Power Steering rack

Diagram ref no 4

This boot encases the exposed portions of the steering rack, forming a protective barrier that keeps out dirt, dust, water, and road grime. By sealing the rack’s moving parts from external contaminants, it helps prevent premature wear, rust, and corrosion. Additionally, it helps retain the lubricating grease inside the rack assembly, ensuring smooth steering operation and reducing the risk of mechanical failure.

The steering rack boot is a low-cost part that plays a critical protective role. Over time, the original boot can crack, tear, or stiffen due to age, heat, and exposure to road conditions. Once compromised, contaminants like water, dirt, and salt can enter the rack housing, accelerating corrosion, wearing internal gears and bearings, and potentially causing rack failure or steering problems. Replacing boot ensures the rack remains protected, lubricated, and functions smoothly - helping avoid costly steering repairs or unsafe handling issues.

Consider replacing the boot if any of the following occur:
•  The rubber bellows shows visible cracks, tears, splits or hardening.
•  You notice grease leaking around the rack area - a sign the boot may have ruptured.
•  There is dirt, water or debris accumulation near the rack, or signs of corrosion on components.
•  Steering feels stiff, rough, or noisy, especially when turning - potentially indicating contamination or inadequate lubrication.
•  You are performing steering or suspension maintenance, or restoring the car, and want to ensure long-term reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG419831C

The product you are viewing cross references to these numbers

Belt deflector roller.



Fits:
Porsche 955 Cayenne S 4.5L 2003-06
Porsche 955 Cayenne Turbo 4.5L 2003-06

This product supersedes Porsche's old part numbers:
- 94810212000
- 94810212001

Click 'zoom in' for large parts diagram.
Diagram ref No 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94810212002

The product you are viewing cross references to these numbers

Radiator water, Centre.



Fits:
Porsche 987 Boxster S 3.2L 2005-08 (ONLY for Tiptronic cars)
Porsche 987 Boxster S 3.4L 2009>>
Porsche 987C Cayman S 3.4L 2006-08 (ONLY for Tiptronic cars)
Porsche 987C Cayman S 3.4L 2009>>
Porsche 997 Carrera 2005-08
Porsche 997 Carrera 2009>>

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99710603702

The product you are viewing cross references to these numbers

Rear trailing arm eccentric bolt.

Fits:
Porsche 964

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433113607

The product you are viewing cross references to these numbers

Radiator water (High Efficiency Aluminium).
This high-efficiency aluminium water-radiator is designed for Porsche 924S and Porsche 944 (manual gearbox) models. It reproduces Porsche’s factory specification—featuring correct core size, inlet/outlet positions, mounting bracket fitment and cooling performance. This radiator ensures proper engine cooling, consistent operating temperatures and long-term reliability.

Fits:
Porsche 924S (2.5L) 1986 - 1988  Manual gearbox
Porsche 944 (2.5L / 2.7L) 1982 - 1989  Manual gearbox

Diagram Ref No 1.

• Position on Vehicle: Front engine bay, part of the cooling system; mounted at the front of the engine to exchange engine coolant heat with ambient air.

•  Applications: Ideal replacement when the original radiator is corroded, leaking, cracked, clogged, or when upgrading cooling performance for spirited driving, restoration or reliability-focused maintenance.

A properly functioning radiator is vital for managing engine heat, maintaining coolant flow and preventing overheating. A degraded radiator can cause elevated temperatures, coolant loss, reduced performance and potential engine damage. Replacing radiator restores correct cooling capacity, protects your engine and supports long-term performance.

When and why to replace:
• Coolant leaks visible around the radiator or mounting points
• Engine temperature running higher than normal or cooling system unable to maintain stable temp
• Radiator shows corrosion, internal blockage, bent fins or damage
• Upgrading to maintain optimum cooling performance for high-load driving or restoration
• Preventative maintenance on higher-mileage or track-used vehicles

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94410603104

The product you are viewing cross references to these numbers

The air conditioning condenser, changes the phase of the refrigerant and expels heat removed from the car. Radiator Aircon Condenser.



Fits Left or Right side

Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2 / C4 1998-05
Porsche 996 GT3 MKI
Porsche 996 GT3 MKII
Porsche 996 GT3 RS

Click 'Zoom in' for large parts diagram.
Diagram Ref No 13.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99757391101

The product you are viewing cross references to these numbers

Air conditioning (air con) desiccator.



Fits:
Porsche 964 >>1992

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96457394300

The product you are viewing cross references to these numbers

Radiator oil cooler. Inside front wing.

Fits:
Porsche 964 1989-94
Porsche 993 1994-97

Diagram Ref No 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96420722004

The product you are viewing cross references to these numbers

Oil Pan. Porsche 970 Panamera PDK with drain plug.
you do not need gasket, your garage will use a sealant
please also order
14 x 97032180900
1 x 00004330573



Fits:
Porsche 970 Panamera / Panamera S / Turbo 2011-16
with PDK transmission

Porsche PANAMERA (970) 3.0 S E-Hybrid


Click 'Zoom in' for large parts diagram.
Diagram Ref No. 28 + 29.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97032102500

The product you are viewing cross references to these numbers

Gearbox oil pan.
The direct-fit replacement transmission / gearbox oil pan assembly designed specifically for the 7-speed PDK dual-clutch gearboxes Porsche models. It sits underneath the transmission housing, captures the fluid reservoir and houses the integrated filter assembly - ensuring proper fluid flow, filtration of internal wear particles and maintaining correct operating temperature and fluid volume. 

Fits:
Cars with PDK Transmission
Porsche 987.2 Boxster 2009 - 2012
Porsche 987C.2 Cayman 2009 - 2012
Porsche 981 Boxster 2012 - 2016
Porsche 981 Cayman 2013 - 2016
Porsche 997.2 Carrera 2009 - 2012
Porsche 997.2 Turbo 2010 - 2013
Porsche 991 (911) 2012 - 2016

Diagram Ref No. 8, 9 and 10

•  Applications: Ideal when original transmission sump/pan is cracked, leaking, or damaged; when filter cannot be serviced separately; or when performing a full transmission service in a vehicle with the PDK gearbox.

The transmission oil pan plays a vital role in PDK gearbox health: it contains the fluid reservoir, houses the filtration screen (in many cases cannot be serviced separately) and helps maintain correct fluid volume and cleanliness. If this pan is cracked, leaking, has a damaged filter, or if internal sludging occurs, you can experience poor shifting, fluid foaming, overheating or even internal gearbox damage. Replacing it with a fresh unit restores correct fluid containment, filter function and protects your transmission investment.

When and why to replace:
• Observable fluid leak or seepage from the transmission sump/pan flange.
• Transmission service interval reached where OEM recommendation is to replace pan and internal filter (especially in PDK units)
• After front-end impact or corrosion has damaged pan or flange.
• During major transmission or clutch overhaul when access is already available.
• Vehicle showing rough or inconsistent shifting, temperature rise, or internal transmission warnings.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1321359

The product you are viewing cross references to these numbers

Oil pump.



Fits:
Porsche 911 1965-73
Porsche 911 2.7L S 1974-75
Porsche 911 2.7L 911/83 Engine 1976

Porsche 914-6 1970-76

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110700206

The product you are viewing cross references to these numbers

Fog Light, left/right chrome, with yellow glass, type Hella 118, with bulb, with e-mark.



Fits:
Porsche 911 2.0-2.4 01/63-07/73
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90163120210

The product you are viewing cross references to these numbers

Fog Light, left / right chrome, with clear glass, type Hella 118, with bulb, with e-mark.



Fits:
Porsche 911 2.0-2.4 01/63-07/73
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1695200502

The product you are viewing cross references to these numbers