Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design91.uk/images/schemaLogo.png https://www.design91.uk/images/schemaLogo.png +443456003478 https://www.design91.uk Facebook Instagram

OE Match

OE Match
About OE Match

OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.

OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.

DISPLAYING 449 to 464 (of 6819 products)
SUSPENSIONKIT996.C2
Product Information
Product Information
OE Match Sports FRONT and REAR shock absorbers PACKAGE, SET OF 4. 
Complete replacement solution for both the front and rear suspension of the Porsche 996 C2 (1998-2005) - for Standard cars (none M030). Supplied as two front units (OE ref no 99634304139) and two rear units (OE ref no 99633305185), these dampers aim to restore the original ride quality, handling precision and chassis control.

Fits:
Porsche 996 C2 1998 - 2005 (Standard cars None M030)

Designed to match OE fitment, damping characteristics and durability, they provide a full-axle refresh in one kit.

This kit is ideal for owners replacing worn shocks that cause increased body roll, bounce, vague steering feel or reduced alignment hold. By renewing all four corners simultaneously, the car retains balanced ride and handling behaviour - avoiding the imbalance that can occur with staggered replacements.

Shock absorbers wear with mileage and age: internal oils degrade, seals weaken and damping changes. Symptoms include increased bounce, less responsive steering, tyre “skating,” and uneven ride height. Replacing all corners with matched new units ensures uniform behaviour, restores alignment accuracy and avoids mismatched performance between old/new components.

When to replace:
Front or rear corners feel soft or bottom-out easily under braking
 The car exhibits excessive body motion or feels unsettled over bumps
 Tyres show uneven wear or the suspension no longer holds alignment
 You’re undertaking a comprehensive suspension refresh or preparing the car for high-performance driving

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT996.C2
99633305185
99633305143
99633305104
99633305121
99633305125
99633305133
99633305124
99633305161
99634304139
99634304104
99634304130
99634304120
99634304123
99634304127
99634304136

The product you are viewing cross references to these numbers
958513029J/2KIT
Product Information
Product Information
Shock Absorber, Rear. Left And Right

Fits:
Porsche 92A Cayenne (958) 3.0L Diesel 2010>>2017
Porsche 92A Cayenne S (958) 3.0L 2010>>2017
Porsche 92A Cayenne (958) 3.6L 2010>>2017
Porsche 92A Cayenne TURBO / S (958) 4.8L 2010>>2017
Porsche 92A Cayenne S Hybrid (958) 3.0L 2010>>2017
Cars With Option Codes:
1BA - Suspension/Dampers, Standard
1BW - Comfort Suspension/Damping (Steel Springs)

Diagram Ref No 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958513029J
958513029J
958513029G
95833305100

The product you are viewing cross references to these numbers
958513029J/2
Product Information
Product Information
Shock Absorber, Rear.
Sold Each.
Fits Left And Right.


Fits:
Porsche 92A Cayenne (958) 3.0L Diesel 2010>>2017
Porsche 92A Cayenne S (958) 3.0L 2010>>2017
Porsche 92A Cayenne (958) 3.6L 2010>>2017
Porsche 92A Cayenne TURBO / S (958) 4.8L 2010>>2017
Porsche 92A Cayenne S Hybrid (958) 3.0L 2010>>2017
Cars With Option Codes:
1BA - Suspension/Dampers, Standard
1BW - Comfort Suspension/Damping (Steel Springs)

Diagram Ref No 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958513029J
958513029J
958513029G
95833305100

The product you are viewing cross references to these numbers
61610103800/1
Product Information
Product Information
Oil strainer, Motorsports. 

Fits:
Porsche 356B Super 90 - 1959 to 1963
Porsche 356C Super 90 - 1963 to 1965

Diagram ref no 45

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610103800
61610103800

The product you are viewing cross references to these numbers
022906035/1
Product Information
Product Information
Fuel pressure regulator, 3.0 Bar. 


Fits:
Porsche 912E - 1975 to 1976
Porsche 914 1.8ltr - 1973 to 1976

Diagram ref no 5



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

022906035
022906035

The product you are viewing cross references to these numbers
9A160510400/1
Product Information
Product Information
Secondar air injection pump.

Fits:
Porsche 987 Boxster 2.9L 2009 - 2012
Porsche 987C Cayman 2.9L 2009 - 2012

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A160510400
9A160510400

The product you are viewing cross references to these numbers
99737504908/1KIT
Product Information
Product Information
Engine mounts,  SET OF 2 
Hydraulic engine mounts are designed to securely connect the engine to the chassis while damping vibration. It’s essential for smooth ride quality and protecting drivetrain components from stress Compatible with variants including Carrera, Turbo, and their S derivatives—excluding models equipped with Porsche Active Driveline Mounts (PADM).

Fits:
Porsche 997 MKI Carrera 2005>> COUPE
Porsche 997 MKI Turbo 2005>> COUPE

Porsche 997 MKII Carrera 2009>> COUPE
Porsche 997 MKII Turbo 2009>> COUPE without PADM (dynamic engine mounts)

Diagram Ref No 2.

The Mount for the Porsche 997 Generation 1 and Generation 2 Coupe (Porsche product code 99737504908) serves as a critical component that secures the engine to the vehicle's chassis. It helps to absorb vibrations and impacts from the engine during operation, maintaining stability and ensuring a smooth ride. This particular engine mount is designed to meet the specific structural and performance requirements of the Porsche 997, providing durability and reliability for both everyday driving and performance enhancements. Proper functioning of the engine mount is essential for optimal engine performance and to minimize wear on other related components.

Position on Vehicle: Front engine mount assembly (left OR right side) – front of the engine block, attaching to the chassis via mount bracket.

Cross-Reference / Alternative Numbers: OEM: 997 375 049 08; also superseded from 997 375 049 04 and 997 375 049 06 in earlier listings.

Applications: Use this mount when original mount shows signs of failure — to restore engine stability, reduce vibration, maintain correct engine alignment and safeguard ancillary components.

An engine mount plays a vital role in stabilising the powertrain and isolating engine-borne vibration from the cabin and chassis. Over time the hydraulic fluid, rubber bushings or bonding will degrade, causing increased engine movement, vibration, noise or premature wear of transmission and drivetrain components. Replacing a suspect mount restores comfort, handling precision and engine/gearbox alignment.

When and why to replace:
 Noticeable engine vibration, rumble or harshness in the cabin or at idle.
 Visual signs of mount wear: cracked rubber, leaking fluid, broken bracket.
• After engine removal, major service or performance upgrades (making access easier).
High-mileage vehicle where original mounts are likely ageing and losing damping capability. 
 Preventive replacement before mount failure protects drivetrain components and avoids costly collateral damage.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99737504908
99737504904
99737504906
99737504908

The product you are viewing cross references to these numbers
9Y0413031E/1
Product Information
Product Information
These replacement FRONT shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
Sold Each.  Fits Left And Right.

Fits:
Porsche 9YA.1 Cayenne 2018>>2024
Replacement for Cars With Option Codes:
1BH - Suspension/Dampers, Standard 2 PASM

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0413031E
9Y0413031E
9Y0413031B
958413031A
9Y0413031C

The product you are viewing cross references to these numbers
99610702602/KIT
Product Information
Product Information
AOS Oil / air separator & hose kit. One of the most common failures in the Boxster or 996 is the Air/Oil Separator, also referred to as the AOS.

Fits:
Porsche Boxster 986 2003>>
Porsche Boxster 987 2005>>
Porsche Cayman 987 2005>>

The AOS is basically a small diaphragm distillery which distills the minute amounts of oil mist in the crankcase, liquifies it and sends it back to the crankcase. The "clean" air is now sent into the air intake (after the throttle body) to be burned off by the engine.

When the AOS starts to fail it cannot separate all of the oil out of the mist and some liquid oil is sent to the air intake.

A few drops of oil is enough to generate the GREAT SMOKE BOMB for which our cars are famous for.
A big smoke bomb once in a while is completely normal, due to the architecture of the flat-6 engine, which may let a drop of oil flow into one of the combustion chambers sporadically.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1, 4, 5, 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610702602
99610702601
99610702600
99610702602
996-107-026-01
98710714502
98710724601
99610717550
98710714602

The product you are viewing cross references to these numbers
98662410400/1
Product Information
Product Information
Secondary air pump.

Fits:
Porsche 986 Boxster 2.5L >>1999

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98662410400
98662410300
98662410301
99662410300
98662410400

The product you are viewing cross references to these numbers
99610702304/KIT2
Product Information
Product Information
Oil separator. One of the most common failures in the Boxster or 996 is the Air/Oil Separator, also referred to as the AOS.

Fits: Porsche Boxster 986 2.7L , 3.2L M96.21/M96.22/M96.23/M96.24

oematch

The AOS is basically a small diaphragm distillery which distills the minute amounts of oil mist in the crankcase, liquifies it and sends it back to the crankcase. The "clean" air is now sent into the air intake (after the throttle body) to be burned off by the engine.

When the AOS starts to fail it cannot separate all of the oil out of the mist and some liquid oil is sent to the air intake.

A few drops of oil is enough to generate the GREAT SMOKE BOMB for which our cars are famous for.
A big smoke bomb once in a while is completely normal, due to the architecture of the flat-6 engine, which may let a drop of oil flow into one of the combustion chambers sporadically.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1, 4, 5, 10



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610702304
996-107-023-04
99610702304
99610702301
99610702302
99610702303
99610723752
99610714755
996107146500

The product you are viewing cross references to these numbers
95533305151/1
Product Information
Product Information
Shock Absorber, Rear.
Sold Each.
Fits Left And Right.

Fits:
Porsche 9PA1 Cayenne (957) 3.6L 2007>>2010
Porsche 9PA1 Cayenne S / GTS (957) 4.8L 2007>>2010
Porsche 9PA1 Cayenne Turbo / Turbo S (957) 4.8L 2007>>2010
Car With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)

Diagram Ref No 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95533305151
95533305151
95533305150

The product you are viewing cross references to these numbers
7PP959253B/1
Product Information
Product Information
Secondary air pump.

Fits:
Porsche 958 Cayenne S / GTS / Turbo 4.8L 2011 - 2018
* option code: 7MG - Emissions concept EU 5
* option code: 7MJ - Emissions concept EU 5J
* option code: 7MM - EU6 plus exhaust concept

Porsche 970 Panamera S/ GTS / Turbo 4.8L 2010 - 2016
* option code: 165 - Emissions concept EU 5
* option code: 7MM - EU6 plus exhaust concept

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

7PP959253B
7PP959253
7PP959253A
7PP959253B
97060510400

The product you are viewing cross references to these numbers
99760520400/1
Product Information
Product Information
Secondary air pump.

Fits:
Porsche 997.1 Turbo 3.6L 2007 - 2009  (9770)
Porsche 997.2 Turbo 3.6L 2010 - 2012   (9770)

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99760520400
99760520400

The product you are viewing cross references to these numbers
95534304
Product Information
Product Information
Shock Absorber, Front.
Each damper duplicates the original’s damping rate, mounting geometry, and mechanical tolerances to deliver predictable ride quality, handling performance, and suspension comfort. Because vehicles have left- and right-hand dampers, ensure correct side when ordering; ideally replace in pairs for balanced suspension behaviour.
Sold each.

Fits:
Porsche 957 Cayenne (9PA1) 3.6L 2007 - 2010
Porsche 957 Cayenne S / GTS (9PA1) 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S (9PA1)  4.8L 2007 - 2010
Cars With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)

Diagram Ref No 15

This shock absorber smooths out bumps, potholes, and road imperfections to provide a more controlled and comfortable ride. It helps keep the front suspension stable during braking, cornering, and acceleration, supporting predictable steering and confident road-holding. By reducing unwanted oscillation, rebound, and vibration, it prevents instability and restores proper suspension performance when the original damper has become worn or ineffective.

Over time, shock absorbers lose their effectiveness through internal wear, fluid leaks, or weakened valving, which leads to a harsher ride and reduced suspension control. A worn damper allows excessive movement, causing instability, longer braking distances, and uneven tyre wear. Replacing it with a fresh OE-match unit restores proper damping, improves handling confidence, and helps maintain overall driving safety and comfort.

You should fit a new shock absorber if:
  The ride has become bouncy, unsettled or harsh over uneven surfaces
  Handling feels loose or unstable, especially at speed or under load
  The vehicle exhibits uneven tyre wear, or suspension components show stress
  Shock absorber shows leaks, damage or reduced damping performance
  You are refreshing or upgrading the suspension for improved comfort or safety

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534304
95534304350
95534304450

The product you are viewing cross references to these numbers
99610702304/KIT1
Product Information
Product Information
Oil separator. One of the most common failures in the Boxster or 996 is the Air/Oil Separator, also referred to as the AOS.

Fits: Porsche Boxster 986 2.5L  M96.20

oematch

The AOS is basically a small diaphragm distillery which distills the minute amounts of oil mist in the crankcase, liquifies it and sends it back to the crankcase. The "clean" air is now sent into the air intake (after the throttle body) to be burned off by the engine.

When the AOS starts to fail it cannot separate all of the oil out of the mist and some liquid oil is sent to the air intake.

A few drops of oil is enough to generate the GREAT SMOKE BOMB for which our cars are famous for.
A big smoke bomb once in a while is completely normal, due to the architecture of the flat-6 engine, which may let a drop of oil flow into one of the combustion chambers sporadically.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1, 4, 5, 10



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610702304
996-107-023-04
99610702304
99610702301
99610702302
99610702303
99610723752
99610714506
99610714755

The product you are viewing cross references to these numbers
DISPLAYING 449 to 464 (of 6819 products)