OE Match

Handbrake shoes fitting kit. Rear axle.
A complete rear handbrake assembly kit, designed to match the original components used in classic Porsche cars. The kit includes all the necessary small parts - from castle nuts, adjusting screws, springs, pins, support bushes, and washers - manufactured to original Porsche specifications.

Fits:
Porsche 911 1965 - 1989

Complete fitting kit contains:
Castle nut, Expanding bow, Adjusting screw, Return spring, Concave washer, Compression spring, Roll pin, Cotter pin, Countersunk-head screw, Support bush.

•  Position on Vehicle: Rear suspension area - the handbrake shoe retaining and adjustment components on the rear brake system (typically rear disc/hub assembly).

•  Applications: Ideal for when you’re replacing or servicing the rear handbrake shoes, or when original retaining hardware is corroded, missing, or the handbrake mechanism is rebuilt or overhauled.

The handbrake system relies on a large number of small components - if any are worn, missing or incorrectly fitted, the handbrake may not engage properly, may fail to hold the vehicle, or may adjust poorly. Using a complete kit ensures all components are new, correct and matched, preventing future issues.

When and why to replace:
• When the rear handbrake shoe hardware shows visible corrosion, fatigue or missing parts.
• During handbrake shoe replacement or rear brake work when access to the assembly is available.
• If the handbrake feels weak, uneven or fails to hold.
• On high-mileage or older vehicles where original hardware has been reused many times and may be compromised.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG35209712

The product you are viewing cross references to these numbers

Door panel set without vinyl, with cut-outs fits all Porsche 911 models from 1974-1989 and all 964 models 1989-1993.
(SET OF 2)


Sold as a Pair Left & Right side

Fits:
Porsche 911 1974-89
Porsche 964

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155503128

The product you are viewing cross references to these numbers

Lambda oxygen sensor.



Fits
Porsche Boxster 986 >>2002
Before or After Cat fits both

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance/Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98660612601

The product you are viewing cross references to these numbers

Side Light Bulbs 501 5W AMBER
Price is for each



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99963113890

The product you are viewing cross references to these numbers

Engine flywheel for mounting 964 / 993 engine on 915 gearbox

Fits
Porsche 964 (911) C2 1989-93
Porsche 964 (911) C4 1989-93
Porsche 993 (911) C2 1994-97
Porsche 993 (911) C4 1994-97
Porsche 993 (911) C2S 1994-97
Porsche 993 (911) C4S 1994-97

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410203301

The product you are viewing cross references to these numbers

Sensor boost pressure.



Fits:
Porsche 996 Turbo / GT2 2001-05
Porsche 997 Turbo / GT2 / GT2 RS 2007-11
Porsche 997 Turbo / Turbo S 2010-13
Porsche 955 Cayenne Turbo 4.5L V8 2003-06
Porsche 957 Cayenne Turbo 4.8L V8 2007-10
Porsche 958 Cayenne Turbo 4.8L 2011>>
Porsche 970 Panamera Turbo 4.8L 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99660618000

The product you are viewing cross references to these numbers

Air filter.



Fits:
Porsche 911 1965-73 Cylinder type
Porsche 914 1970-76

Replacement Air Filter.
Outer diameter: 152 mm,
Inner Diameter: 88 mm,
Inner Diameter 1: 88 mm,
Height: 222 mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90110895511

The product you are viewing cross references to these numbers

Brake light switch 2pin. Fits into the brake master cylinder.
Sold each.



Fits:
Porsche 911 1986-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

113945515H

The product you are viewing cross references to these numbers

Number plate light



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 991 Turbo 2014>>
Porsche 991 GT3 2014>>
Porsche 981 Boxster 2012-16
Porsche 981 Boxster Spyder 2016
Porsche 718 (982) Boxster 2017>>
Porsche 982 Boxster Spyder 2019>>
Porsche 981C Cayman 2014-16
Porsche 718C (982C) Cayman 2017>>
Porsche 981 Cayman GT4 2016
Porsche 982 Cayman GT4 2019>>
Porsche 918 Spyder 2015
Porsche 970 Panamera 2014>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAB943021

The product you are viewing cross references to these numbers

Distributor cap.



Fits:
Porsche 911 1965-68 S / L
Porsche 911 1972-73
Porsche 911 2.7L 1974-77

Please note: If your car has a 002 Bosch yellow sticker on distributor you will need original distributor cap as Bosch option we offer does not have the cut out for wiring harness.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91160293300

The product you are viewing cross references to these numbers

Distributor cap.
This cap forms the upper section of the distributor assembly, routing high-voltage current from the ignition coil to each spark plug wire in the correct firing order.

Fits:
Porsche 924 1976 - 1980
Porsche 912E

Over time, original caps can crack, carbon-track, corrode at the terminals, or develop moisture ingress - all of which reduce ignition performance. Installing a fresh  cap restores clean, strong spark delivery and stable engine operation.

A deteriorated or damaged distributor cap can cause:
• Misfires, hesitation, or rough running
• Hard starting, especially in damp weather
•  Weak or inconsistent spark delivery
•  Poor fuel efficiency or lack of power
Replacing the cap is a simple, effective way to restore ignition reliability and smooth engine performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

113905207C

The product you are viewing cross references to these numbers

Main Crankshaft Bearing Shell Standard.
SET OF 14

Fits:
Porsche Boxster 986 2.7L M96.22 / M96.23
Porsche Boxster 986 3.2L M96.21 / M96.24
Porsche 996 3.4L M96.01 / M96.02 / M96.04

Porsche Boxster 987 2.7L M97.20
Porsche Boxster 987 3.2L M96.26
Porsche Cayman 987C 2.7L M97.20

Porsche Boxster 986 2.5L M96.20*
Porsche Boxster 987 2.7L M96.25*

Diagram ref. 13.

Important fitment information – please read before ordering:

Please be aware that some early 2.5L 986 Boxster models (*) were fitted with main bearing shells with the alignment/locating tab in the centre, as opposed to offset to the side, which is what this listing is for. Please check your existing bearing shells before ordering. If you have centre-aligned bearing shells, this product is not suitable and is no longer offered by Porsche as a replacement part.

In addition, some 2.5L models may be fitted with the earlier-style crankcase carrier, meaning the bearing shells required have the alignment tab on the right, not the left as is the case with this listing. Please ensure you check your existing shells before ordering. If the alignment tab on your existing shells is located on the right, please use part no. 99610113164 instead.

Additionally, for 2005 and 2006 2.7L 987 Boxster models (M9625 engine code) (*), the existing bearing shells are no longer offered by Porsche. These have the locating tab on the opposite side, meaning these bearings are incompatible. In order to fit these bearings, the crankcase carrier will need to be updated to the later style, part no. 99610100709.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610120510

The product you are viewing cross references to these numbers

Fuel hose connector.



Fits:
Porsche 911 (1974-1983)
Porsche 930 Turbo (1975-1977)

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91120117102

The product you are viewing cross references to these numbers

Horn, 500 Hz, high tone.



Fits:
Porsche 911 2.0L-2.7L 01/1963-07/1973
Porsche 912 1.6L 01/1965-02/1970

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG63511302

The product you are viewing cross references to these numbers

Speedo / speedometer cable.

Fits:
Porsche 911 1972- 1977

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91164151000

The product you are viewing cross references to these numbers

Speedo cable for LHD cars.



Fits:
Porsche 924 1976-85 LHD Cars ***not for (J)
Porsche 924S 1986-88 LHD Cars
Porsche 944 1982-85 LHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

142957801C

The product you are viewing cross references to these numbers