OE Match

Valve Guide 1st Oversize. Inlet and exhaust.
The valve guide (first oversize) is designed for intake and exhaust valves in Porsche 911 engines. It replicates the original Porsche factory specification for diameter, length, material and bore alignment—ensuring restores accuracy in valve stem guidance and seating, reduces oil consumption and maintains engine performance.
Sold each, 12 required per engine.

Fits:
Porsche 911 1965 - 1989

Outer diameter: 13,26 mm,
Bore Ø: 9,00 mm,
Length: 51,20 mm,
Fitting Position: Intake Side

Diagram Ref No 2.

Valve guides are critical for maintaining correct valve stem movement, sealing and combustion chamber integrity. Worn guides can lead to increased oil usage, blue smoke from the exhaust, valve mis-alignment and poor engine performance. Replacing with a correctly sized oversize guide restores engine health and reliability.

When and why to replace:
• Engine rebuild or cylinder head removal for any reason.
• Excessive valve stem play, oil consumption or exhaust smoking.
• Depending on bore wear after valve seat or guide replacement (oversize required).
• When the original guide is out of tolerance following decades of service.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010432150

The product you are viewing cross references to these numbers

Replacement water pump with gasket. Impeller 64,0 mm diameter
The OE-Match water pump is a direct-fit replacement designed for Porsche 996 Turbo / GT-variants models. This replacement water pump provides consistent coolant circulation under varying engine loads - from everyday driving to spirited performance or track use. Its manufactured to OEM standards, allowing plug-and-play installation.

Fits:
Porsche 996 Turbo / GT2 2001 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 996 GT3 RS 2003 - 2004

Diagram ref no 2

NOTE: Water Pump COMES WITH MOUNTING GASKET.

The water pump circulates coolant from the radiator through the engine block and heads, then back to the radiator to reject heat. This circulation prevents the engine from overheating, preserves optimal combustion temperatures, and protects internal components under load or high temperature conditions. With correct flow rates and seal integrity, the OE Match pump ensures stable thermal management across all driving scenarios.

Over time and mileage, the original water pump can suffer from impeller wear, seal degradation, bearing fatigue or corrosion - especially given the demanding thermal environment of the 996’s flat-six engine. A failing pump can lead to reduced coolant flow, overheating, coolant leaks and potential engine damage. Replacing with a correctly specified OE Match unit restores reliable coolant circulation, prevents overheating, and prolongs engine life.

When to replace:
• Coolant leaks visible at pump housing or around gasket/seal area
• Overheating on idle, in traffic or under load - temperature gauge rising above normal
• Unusual noises from the pump area (bearing hum, whine, vibration)
• After many years or high mileage - as part of preventive maintenance (common recommendation every ~4-5 years / ~60,000 miles)
• As part of a cooling-system overhaul (radiator, hoses, thermostat, belt) to ensure all components are fresh and compatible
• If pump’s impeller shows signs of wear or internal corrosion during inspection

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610601177

The product you are viewing cross references to these numbers

Water pump. Porsche 924 76-85
The water pump comes complete with gasket.



Fits:
Porsche 924 2.0L 1976-85

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

060121012

The product you are viewing cross references to these numbers

Replacement air filter. 
This air filter element is a standard replacement filter that fits into the Porsche 991.2 Carrera air intake system. It’s engineered to match the original part’s size, sealing surfaces, and filtration characteristics for precise fit and dependable performance, direct-fit install in the factory airbox without modification. The filter captures airborne dust, dirt, and debris before the air enters the engine, helping maintain clean airflow for optimal combustion and engine protection.

Fits:
Porsche 991.2 Carrera 2 / 2S / GTS 2016 - 2019
Porsche 991.2 Carrera 4 / 4S / GTS 2016 - 2019
Porsche 991.2 Targa 4 / 4S / GTS 2016 - 2019

Diagram ref no 4

The engine air filter’s primary role is to clean incoming air before it enters the engine’s combustion chambers. By trapping contaminants such as dust, pollen, and environmental debris, the air filter helps ensure the engine receives clean air needed for efficient combustion. This protects critical internal components like pistons, valves and cylinder walls from premature wear. Clean intake air also supports consistent power delivery, smooth throttle response and improved fuel economy.

Over time, air filters become loaded with trapped contaminants that restrict airflow and reduce combustion efficiency. A clogged or worn air filter can cause reduced throttle response, increased fuel consumption, and heightened engine wear due to unfiltered particles entering the intake. Replacing the air filter with a quality OE Match unit restores clean airflow, supports efficient engine function, and helps maintain performance and longevity.

Replace the air filter if you notice:
• Visible dirt, dust build-up, or discoloration on the filter media
• Reduced engine responsiveness or power delivery
•  Higher than normal fuel consumption
•  After a specified service interval or frequent dusty driving.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1129620

The product you are viewing cross references to these numbers

Headlamp set, loose kit, with black rim, without glass. LHD (Left hand Drive) cars
Fits left or right side of the car.

Fits:
Porsche 911 2.0-3.3L  08/1969 - 07/1983

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163111300

The product you are viewing cross references to these numbers

Headlamp set, loose kit, with chrome rim, without glass. LHD cars
Fits left or right side of the car.



Fits:
Porsche 911 2.0-3.3 08/69-07/83

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163111300

The product you are viewing cross references to these numbers

Brake disc cover plate. Porsche 911 1969-73
Fits rear left or right side . Price is each



Fits:
Porsche 911 1969-73 (REAR)

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135208114

The product you are viewing cross references to these numbers

Stone guard for air conditioning condenser.



Fits:
Porsche 911 2.0L-3.3L 08/1968-07/1989

Click 'Zoom in' for large parts diagram.
Diagram ref no 42

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91157305801

The product you are viewing cross references to these numbers

Rear axle cross tube.



Fits:
Porsche 911 Carrera 72-86

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133101002GRV

The product you are viewing cross references to these numbers

Coloured static 2-point rear lap belt with buckles. Complete assembly reproduction. SET OF 2



Fits:
Porsche 911 1974-83
Porsche 911 1984-89
Porsche 911 Turbo 3.3L 1978-89
Porsche 964 (911) C2 1989-93
Porsche 964 (911) C4 1989-93
Porsche 964 (911) RS 3.6L 1991-93
Porsche 964 (911) RS 3.8L 1991-93
Porsche 964 (911) TURBO 3.3L 1991-93
Porsche 964 (911) TURBO 3.6L 1991-93
Porsche 993 (911) C2 1994-97
Porsche 993 (911) C4 1994-97
Porsche 993 (911) RS 1994-97
Porsche 993 (911) C2S 1994-97
Porsche 993 (911) C4S 1994-97
Porsche 993 (911) TURBO 1994-96
Porsche 993 (911) GT2 1994-97
Porsche 993 (911) TURBO S 1994-97
Porsche 924 2.0L 1979-85
Porsche 924 Turbo 2.0L 1979-81
Porsche 924 Turbo 2.0L 1982-84
Porsche 924 Carrera GT 2.0L 1981
Porsche 924 Carrera GTS 2.0L 1982
Porsche 924S 2.5L 1986-87
Porsche 924S 2.5L 1988
Porsche 944 2.5L 8V 1982-87
Porsche 944 2.7L 8V 1988-89
Porsche 944S 2.5L 16V 1987-88
Porsche 944S2 3.0L 16V 1989-91
Porsche 944 Turbo 2.5L 8V 1985-88
Porsche 944 Turbo 2.5L 8V 1989-91
Porsche 944 Turbo S 2.5L 8V 1988>>
Porsche 968 3.0L 1992-94
Porsche 968 Sport 3.0L 1994-95
Porsche 968 CS 3.0L 1993-95
Porsche 968 Turbo S 3.0L 1993-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

47785779570

The product you are viewing cross references to these numbers

Water pump, Includes gasket; Pulley not included.
This water pump is a high-quality replacement coolant pump engineered for the Porsche 718 Boxster and 718 Cayman series. This water pump ensures reliable coolant circulation, optimal engine temperature regulation, and long-term durability.

Fits:
Porsche 718 (982) Boxster 2017>>
Porsche 718 (982C) Cayman 2017>>

Diagram ref no 39

This OE-Match pump is ideal for replacing aged, leaking or failed original pumps, or as part of a comprehensive cooling system overhaul on the 718 Boxster/Cayman.

The water pump circulates coolant from the radiator through the engine block and head, ensuring heat generated by combustion is efficiently transferred away and dissipated. By maintaining a constant flow and consistent coolant circulation, it helps regulate engine temperature, prevents overheating, and supports reliable engine performance under all driving conditions.

Over time the water pump’s internal impeller, seals and bearings can wear or corrode. When this happens, coolant flow becomes restricted or leaks may develop - reducing cooling system efficiency and increasing the risk of engine overheating. Replacing a worn or failing pump ensures your Porsche’s cooling system remains fully functional, protects the engine from thermal stress, and maintains long-term reliability.

When to Replace:
• Coolant leaks visible around the pump housing or gasket area
• Engine overheating, particularly under load or in warm weather
• Coolant loss without obvious external hose leaks
• Noisy operation from the pump (bearing noise, grinding)
• During major cooling-system maintenance — e.g., when replacing radiator, thermostat or coolant hoses

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A210605003

The product you are viewing cross references to these numbers

Steering track rod with ball joint.
Sold each.



Previous part numbers: 99334703102, 99334703103, 99334703104

Fits:
Porsche 993 1994-97

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99334703105

The product you are viewing cross references to these numbers

This is a new set of Type 4 2.0 liter 94mm flat top slipper skirt performance pistons and cylinders. These are high-compression European-style pistons. Perfect for adding some compression to your performance rebuild or for those in the European market.



Engine Type : Porsche 914, VW Type 4, Bus or Sandrail.

Engine size: 2000cc
Stroke: 71 to 78mm
Cylinders: Cast iron
Pistons: Hypereutectic aluminum alloy
Compression Height: 35.20mm

Set includes: 4 pistons, 4 cylinders, 4 pins, and a set of rings

Rubber seal door window outer, length 660mm

Fits:
Porsche 356 A 1955 - 1959
Porsche 356 A 1955 - 1959  F 150 001 >> Cabrio / Hardtop
Porsche 356 A 1955 - 1959  F 61 001 >> 150 000 Cabrio

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64453193100

The product you are viewing cross references to these numbers

Rubber base for rear license plate light.

Fits:
Porsche 356 Pre-A and 356 A 1950-59
Coupe / Cabrio

Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35662805

The product you are viewing cross references to these numbers

Number plate light gasket.
Two required. Price is each.



Fits:
Porsche 911 (1974-1989)
Porsche 914 (1975-1976)
Porsche 930 (1976-1989)
Porsche 912E (1976)

Click 'Zoom in' for large parts diagram.
Diagram ref no 46

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163160801

The product you are viewing cross references to these numbers