OE Match

Gearbox oil sump gasket.



Fits:
Porsche 958 Cayenne 2011>> 8-speed Auto Transmission
Porsche 970 Panamera Diesel 2012>> 8-speed Tiptronic Transmission
Porsche 970 Panamera HYBRID 2012>> 8-speed Tiptronic Transmission.

Click 'Zoom in' for large parts diagram.
Diagram ref no 34.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95832137100

The product you are viewing cross references to these numbers

Temperature sensor on water pump.
includes seal.



Fits:
Porsche 957 Cayenne 3.6L 2008-10

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510612501

The product you are viewing cross references to these numbers

Temperature sensor on water pump.
included seal.



Fits:
Porsche 955 Cayenne 3.2L 2004-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510612501

The product you are viewing cross references to these numbers

Parking brake cable, Front. Actuator to console.



Fits:
For LHD Cars
Porsche 955 Cayenne 2003-06
Porsche 957 Cayenne 2007-10

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95542314101

The product you are viewing cross references to these numbers

Shock absorber boot, Rear axle.



Fits:
Porsche 955 Cayenne 2003-06 (I1BA)
Porsche 957 Cayenne 2007-10 (I1BA/I1BW/I1BH)

I1BA - for cars with Standard Suspension
I1BW - for cars with Comfort Suspension (steel spring)
I1BH - for cars with 2 PASM Standard Suspension

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534350500

The product you are viewing cross references to these numbers

Shock absorber boot, Front.



Fits:
Porsche 955 Cayenne 2003-06 (I1BA)
Porsche 957 Cayenne 2007-10 (I1BA/I1BW/I1BH)

I1BA - for cars with Standard Suspension
I1BW - for cars with Comfort Suspension (steel spring)
I1BH - for cars with 2 PASM Standard Suspension

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534350500

The product you are viewing cross references to these numbers

Front lower arm bush

Fits:
Porsche 955 Cayenne MKI 2003-06
Porsche 957 Cayenne MKII 2007>>

Diagram ref No 17.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534158810

The product you are viewing cross references to these numbers

Engine oil pressure switch.



Fits:
Porsche 955 Cayenne 3.2L 2004-05
Porsche 957 Cayenne 3.6L 2008-10
Porsche 958 Cayenne 3.6L 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95560609102

The product you are viewing cross references to these numbers

Windscreen washer fluid level sensor.



Fits:
Porsche 955 Cayenne 2003-06
Porsche 957 Cayenne 2007-10
Porsche 958 Cayenne 2011>>
Porsche Macan 2014>>
Porsche 970 Panamera 2010>>
Porsche 987 Boxster 2005>>
Porsche 981 Boxster 2012>>
Porsche 987C Cayman 2005>>
Porsche 981 Cayman 2014>>
Porsche 997 2005>>
Porsche 991 2012>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95562810500

The product you are viewing cross references to these numbers

Water reservoir / expansion tank lid cover.



Fits:
Porsche 955 Cayenne 3.2L / S 4.5L V8 2004-06
Porsche 955 Cayenne 4.5L V8 TURBO 2003-06
Porsche 957 Cayenne 3.6L / S 4.8L V8 2007-10
Porsche 957 Cayenne 4.8L TURBO 2007-10
Porsche 957 Cayenne 3.0L DIESEL 2007-10
Porsche 970 Panamera S 2010-16
Porsche 970 Panamera GTS / TURBO 2010-13
Porsche 970 Panamera HYBRID 2012-16
Porsche 970 Panamera DIESEL 2012-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510644720

The product you are viewing cross references to these numbers

Fuel injector seal o-ring. 9,3 x 2,62.
Price is for each.



Fits:
Porsche 955 Cayenne 3.2L 2004-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95511090200

The product you are viewing cross references to these numbers

Crankcase lid. 3.6. mm.



Fits:
Porsche Cayenne 955 3.2L 2004-05
Porsche Cayenne 957 3.6L 2008-10
Porsche Cayenne 958 3.6L 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510121500

The product you are viewing cross references to these numbers

Four point gearbox bearing.
A four-point contact bearing inside the gearbox housing that supports the pinion / differential or output shaft, maintaining correct alignment and rotational support under load. It is a critical structural component of the transmission case on classic 911 / 914 gearboxes. Sold as a single bearing unit - replace as needed when rebuilding or servicing the gearbox, or when diagnosing shaft play or bearing wear.

Fits:
Porsche 911 1965 - 1971 Manual Gearbox cars
Porsche 911 1965 - 1983 Sportomatic Gearbox cars
Porsche 914 1970 - 1976 Manual and Sportomatic gearboxes

This bearing replaces the factory-installed unit (or previous equivalent bearing - OE part number 99905201600) and restores proper gearbox support for shafts that transmit torque and rotational forces - vital for gearbox longevity and reliable shifting.

Gearbox bearings wear out over time from torque loads, heat, and repeated cycles. A worn or damaged four-point bearing may lead to:
• Shaft misalignment or excessive play
• Increased gear noise, whining or rumbling
• Premature wear on shafts, gears, or synchros
• Gearbox instability or failure under load

Replacing with a correctly spec’d bearing restores shaft integrity, ensures smooth power transmission, and helps prevent costly internal damage - especially important on vintage 911 and 914 gearboxes where early detection can save major rebuilds.

You should consider replacing this bearing if:
•  There is noticeable shaft play or wobble in the gearbox output or pinion shaft
•  You hear whining, rumbling, or unusual noise from the gearbox under load
•  The gearbox has high mileage or has seen hard use
•  You are performing a gearbox rebuild, overhaul, or restoration
•  Internal inspection reveals bearing wear, scoring, or heat damage

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9990520160A

The product you are viewing cross references to these numbers

Pressure ring for rocker cover.
A small sealing ring / pressure ring / rubber-grommet placed under valve-cover / rocker-cover bolts to seal the bolt hole and prevent oil from seeping past the fastener into the engine bay.
Sold each

Fits:
Porsche 944 S / 944 S2 1987 - 1991
Porsche 968 1992 - 1995
Porsche 928 S4 / 928 GT / 928 GTS 1987 - 1995

Diagram ref no 12.

This pressure ring creates a tight, oil-resistant seal around the valve-cover bolt holes, preventing leaks and keeping the cover seated properly. It maintains correct bolt clamping tension while protecting the aluminium cover from damage, and its heat-, oil- and vibration-resistant construction ensures long-term reliability under engine operating conditions. By replacing worn or hardened grommets, it restores proper sealing and supports clean, leak-free valve-cover installation during maintenance or gasket replacement.

Over time, pressure rings / bolt grommets degrade due to heat, oil exposure, and mechanical stress.
Worn seals can lead to:
• Oil seepage around valve-cover bolts
• Leaks dripping down into the engine bay or onto belts/harness
• Reduced engine bay cleanliness and potential fires in worst-case scenarios
• Difficulty obtaining proper clamping pressure when re-torquing the cover

Replacing the ring restores proper sealing, prevents future leaks, and ensures the valve cover remains securely mounted and sealed under all conditions.

When to replace - You should install new rings if:
• You are removing or replacing the valve cover or gasket
• Existing rings appear hardened, cracked, brittle, or deformed
• You notice oil leaking around valve-cover bolt heads
• You are performing engine maintenance or rebuilding the top end

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92810411502

The product you are viewing cross references to these numbers

Brake hose retainer spring. FRONT.
Price is for each.




Porsche 957 Cayenne 2007-10
Porsche 958 Cayenne 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95535532500

The product you are viewing cross references to these numbers

Hexagon headed heat exchanger bolt to muffler.



Fits:
Porsche 911 1969-77
Porsche 914-6 1970-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9000751480Y

The product you are viewing cross references to these numbers