OE Match

Control button for PCM2 and PCM3 unit.

Fits:
Porsche 981 Boxster / Boxster Spyder2012-16 (I665)
Porsche 981C Cayman / Cayman GT4 2012-16 (I665)
Porsche 991.1 Carrera 2012-16 (I665)
Porsche 958 Cayenne 2011-16 (I665)
Porsche 970 Panamera 2011-16 (I665)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9706429

The product you are viewing cross references to these numbers

Grommet rear overrider tube. 
Sold each - 2 required per car

Fits:
Porsche 356 Pre-A - 1950 to 1955
Porsche 356A - 1955 to 1959

Replica rubber grommet for inner ends of rear bumper overrider tubes for Porsche 356 and Porsche 356 A.
Improved formulation and finish 

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450529101

The product you are viewing cross references to these numbers

Nose cone boot gearbox. 

Fits:
Porsche 356 Pre-A - 1950 to 1955
Porsche 356A - 1955 to 1959

Replica of rubber nose cone boot for transmission type 519, 644 and 716

Diagram ref no 42

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

51920555

The product you are viewing cross references to these numbers

Chrome top of door trims kit - 28.5 inches long  SET OF 2

This provides a decorative finish and holds the window scraper rubber against the glass.

Fits:
Porsche 356A D Convertible 
Porsche 356B Roadster

This Porsche 356 chrome door trims kit is ready to fit. An exact duplicate of the original door-top trim is made with precision extruded brass. The pieces are trimmed, finished, notched and drilled to fit before being treated to a triple-plated chrome finish.

This kit includes the two chrome door trims that replace  64453143141 / 64453143241 , the window scraper rubber - 64453193141 - and the correct seal between door and trim - 64402592800. Together these provide a perfect finish for the doors.

Diagram Ref no 43

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64453143141

The product you are viewing cross references to these numbers

Mounting bracket 60mm diameter dashboard clock. 

Fits:
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965

Instrument gauge bracket for any 60mm clock including VDO fitted to the 356 from 1955 to 1965. Precision cut from the correct gauge steel with a clear zinc coating. 

Dog Teeth gear early Porsche 928 3rd-5th Gears, With Shift Stops

Fits: Porsche 928 



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92830224300

The product you are viewing cross references to these numbers

Side window seal.
Sold as a pair

Fits:
Porsche 356 Pre-A Cabriolet - 1950 to 1955
Porsche 356A T1 Cabriolet - 1955

Replica rubber grey convertible top to door glass seal for Porsche 356 Pre A and 356 A T1 Cabriolet.
Remanufactured from original part using contemporary rubber compound for longer life and correct, concours quality feel and fit.
These seals have been cut into three pieces to ensure proper fit into the aluminium channel. Exact measurements vary from car to car.

This is the correct part for early Porsche 356, the grey and black variants of part number 644.542.095.20 are sometimes wrongly listed for these cars. Replacement for 64454292120

Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64454292120

The product you are viewing cross references to these numbers

Dog Teeth gear early Porsche 928 1st-2nd Gears, Without Shift Stops

Fits: Porsche 928 



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92830224200

The product you are viewing cross references to these numbers

Dog teeth 1st gear. Porsche 911 & 912 1965-71, 1st Gear with 4-Speed 2 slots in hub

Fits:
Porsche 911 1965-71

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90230224104

The product you are viewing cross references to these numbers

Trim spring door window seal - left or right hand side
Sold each - 2 required per car

Fits:
Porsche 356 Pre-A - 1950 to 1955
Porsche 356A (early) - 1955

Replica door window seal trim spring for Porsche 356 Pre A and early 356 A.
This is a precision, machine made steel spring and a new replica of the original.

 Replaces 356 52801

Fits to diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35652801

The product you are viewing cross references to these numbers

Engine cylinder heads Porsche 911 3.0L SC 150 kW (200 hp) M930.10 (Reconditioned)

SET OF 6 

Fits:  Porsche 911 3.0L SC 150 kW (200 hp) M930.10

Please note: Reconditioned units are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

Please note good reconditioned cylinder heads are becoming very hard for us to supply and this is simply because the core exchange units are not being returned to us. If you fail to return the core unit to us within 30 days we reserve the right to refuse the surcharge refund.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010402908

The product you are viewing cross references to these numbers

Engine cylinder heads Porsche 911 3.0L SC 132 kW (177 hp) M930.03 (Reconditioned)

SET OF 6 

Fits:  Porsche 911 3.0L SC 132 kW (177 hp) M930.03

Please note: Reconditioned units are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

Please note good reconditioned cylinder heads are becoming very hard for us to supply and this is simply because the core exchange units are not being returned to us. If you fail to return the core unit to us within 30 days we reserve the right to refuse the surcharge refund.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010401905

The product you are viewing cross references to these numbers

Engine cylinder heads Porsche 911 3.3L Turbo 221 kW (296 hp) M930.66 / M930.68 (Reconditioned)

SET OF 6 

Fits:
Porsche 911 3.3L Turbo 221 kW (296 hp) M930.66 / M930.68

Please note: Reconditioned units are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

Please note good reconditioned cylinder heads are becoming very hard for us to supply and this is simply because the core exchange units are not being returned to us. If you fail to return the core unit to us within 30 days we reserve the right to refuse the surcharge refund.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010404309

The product you are viewing cross references to these numbers

Engine cylinder heads Porsche 911 3.2L Carrera 170 kW (230 hp) M930.26 (Reconditioned)

SET OF 6 

Fits:
Porsche 911 3.2L Carrera 170 kW (230 hp) M930.26


Please note: Reconditioned units are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

Please note good reconditioned cylinder heads are becoming very hard for us to supply and this is simply because the core exchange units are not being returned to us. If you fail to return the core unit to us within 30 days we reserve the right to refuse the surcharge refund.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010703307

The product you are viewing cross references to these numbers

Engine cylinder heads Porsche 911 3.2L Carrera 170 kW (230 hp) M930.20 / M930.21 (Reconditioned)

SET OF 6 

Fits: Porsche 911 3.2L Carrera 170 kW (230 hp) M930.20 / M930.21

Please note: Reconditioned units are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

Please note good reconditioned cylinder heads are becoming very hard for us to supply and this is simply because the core exchange units are not being returned to us. If you fail to return the core unit to us within 30 days we reserve the right to refuse the surcharge refund.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010703306

The product you are viewing cross references to these numbers

Engine cylinder heads Porsche 993 3.6L Turbo 300 kW (400 hp) M64.60 (Reconditioned)

SET OF 6 

Fits:
Porsche 993 3.6L Turbo 300 kW (400 hp) M64.60


Please note: Reconditioned units are sold on an exchange basis, A surcharge will be held and then refunded when the old one is returned.

Please note good reconditioned cylinder heads are becoming very hard for us to supply and this is simply because the core exchange units are not being returned to us. If you fail to return the core unit to us within 30 days we reserve the right to refuse the surcharge refund.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99310403352

The product you are viewing cross references to these numbers