OE Match

Targa roll bar base moulding.



Fits:
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9145591

The product you are viewing cross references to these numbers

Rear Screen Corner. CHROME



Fits:
Porsche 911/912 1965-79 Targa

Click picture for large parts diagram
Diagram Ref: 26 & 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156556

The product you are viewing cross references to these numbers

Rear Screen Moulding. BLACK



Fits:
Porsche 911 1978-89 TARGA

Click picture for large parts diagram
Diagram Ref: 11 & 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91156555

The product you are viewing cross references to these numbers

Stone foil clear lower. 
Protective stone guard - also known as a stone protection film or gravel guard - is designed to fit the rear lower section of the body on classic Porsche 911 965 Turbo models. This is a high-quality stone guard that attaches to the rear lower body panel to protect the finish from road debris, stone chips, and gravel impacts.

Fits:
Porsche 965 Turbo 1991 - 1993

Diagram ref no 10.

The stone guard acts as a barrier between road debris and your paintwork/metal body panels. By intercepting stones, grit, and other small projectiles thrown up by the rear wheels, it helps reduce paint chips, scratches, and corrosion in high-impact zones. This protection is especially valuable on classic cars where original bodywork and resale value are priorities.

Function:
•  Protects bodywork from rock chips, gravel, and road debris
•  Preserves paint finish and panel integrity
•  Maintains classic appearance by replicating correct contour and fit Reduces corrosion risk in frequently impacted areas

Over time, stone guards can wear or deteriorate, leaving vulnerable metal exposed — replacing with an OE Match unit restores both protection and visual continuity.

Stone guards are a practical protective accessory on older performance vehicles that see regular road use. Classic Porsches often operate at higher speeds, where loose gravel and road debris can rapidly chip paint and expose bare metal, leading to rust and costly refinishing work. Replacing an old, cracked, or missing stone guard with this OE Match product helps keep the rear lower body protected, good-looking, and original-correct.

When to replace. Replace the stone guard when:
•   It is cracked, torn, or missing
•   Body paint behind it shows chips or damage
•   During restoration or repaint preparation
•   Stone guard edges are lifting or no longer secure
•   You want to maintain body protection and resale value




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96555932

The product you are viewing cross references to these numbers

Stone foil clear upper, Large.
OE Match front stone guard - also called a protective guard or gravel guard - is designed as a direct-fit replacement protection panel for the front lower body section of classic Porsche 911 965 Turbo models. It is made from durable material designed to adhere to the lower bodywork to shield paint and metal from rocks, gravel, mud, and other debris thrown up by the front wheels.

Fits:
Porsche 965 Turbo 1991 - 1993

Diagram Ref No 9.

The stone guard serves as a barrier between the roadway and the vulnerable lower body panels, intercepting and deflecting debris that could otherwise chip paint, dent panels, or accelerate corrosion. It is especially valuable on classic cars that are driven regularly, show cars being prepared for preservation, or vehicles undergoing restoration where preserving original sheet metal is a priority.

Function:
•  Protects the front lower body area from stone chips, gravel impact, and flying debris
•  Preserves paint and underlying metal against wear and tear
•  Complements restoration or daily use protection, keeping the classic look intact
•  Reduces long-term corrosion risk by shielding exposed areas

Stone guards are a simple but effective protective addition that helps keep classic Porsches looking their best. Without them, rock chips and debris can quickly:
•  Damage paintwork
•  Expose bare metal to moisture
•  Accelerate oxidation and corrosion
•  Force costly refinishing or panel repair.

Replacing worn or missing guards with an OE Match panel helps preserve original sheet metal, maintain a clean exterior finish, and support long-term vehicle integrity - crucial for both drivers and collectors.

When to replace.  Replace the front stone guard when:
•  It is cracked, torn, or warped
•  It is missing or poorly attached
•  The protective film is peeling or thinning
•  Paint chips or panel dings are occurring in previously protected areas
•  You are restoring bodywork or completing a cosmetic refresh

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96555932

The product you are viewing cross references to these numbers

Rear Screen Moulding Chrome.



Fits:
Porsche 911 1965-83 Targa

Click 'Zoom in' for large parts diagram
Diagram Ref: 24 & 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156555

The product you are viewing cross references to these numbers

Replacement Wheel Bolt +18mm Longer than Standard Size. chrome-plated and salt spray tested. 



Fits:
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman
Porsche 991.1 & 991.2
Porsche 981 Boxster

Porsche 992

Porsche Macan

Porsche Panamera 970 & 971 

Porsche Cayenne

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99736120345

The product you are viewing cross references to these numbers

Replacement Wheel Bolt +5mm Longer than Standard Size. chrome-plated and salt spray tested. 



Fits:
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman
Porsche 991.1 & 991.2
Porsche 981 Boxster

Porsche 992

Porsche Macan

Porsche Panamera 970 & 971 

Porsche Cayenne

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99736120332

The product you are viewing cross references to these numbers

Replacement Wheel Bolt Standard Size. chrome-plated and salt spray tested. 



Fits:
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman
Porsche 991.1 & 991.2
Porsche 981 Boxster

Porsche 992

Porsche Macan

Porsche Panamera 970 & 971 

Length 61 mm
Outer thread M14 x 1,5 mm
Thread Length 20 mm
Quality/ Grade 10.9
Spanner Size 19
Bolt Head-/Nut Design Male Hex
Wheel Fastening Ball seat A/G
Screw length below head 29 mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99736120302

The product you are viewing cross references to these numbers

Locking wheel bolt kit (+7mm/+15mm longer). Chrome plated
Fits cars with smaller spacers on front (0mm-7mm) and larger spacer on rear (12mm-15mm)



Rusty old looking wheel bolts can spoil the look of your Porsche and even damage your alloy wheels. high quality locking wheel bolts to match their stainless wheel bolts range. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is chrome-plated and salt spray tested. 

Fits:
Porsche Boxster 986 / 987
Porsche 996 / 997
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608300003

The product you are viewing cross references to these numbers

Locking wheel bolt kit (standard size) Chrome plated 
Fits cars without spacers or with spacers up to 7mm

Rusty old looking wheel bolts can spoil the look of your Porsche and even damage your alloy wheels. high quality locking wheel bolts to match their stainless wheel bolts range. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is chrome-plated and salt spray tested. 

Fits:
Porsche Boxster 986 / 987
Porsche 996 / 997
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608300001

The product you are viewing cross references to these numbers

Locking wheel bolt kit (Extra long). Chrome plated
Fits cars with spacers 12mm-15mm



Rusty old looking wheel bolts can spoil the look of your Porsche and even damage your alloy wheels.
high quality locking wheel bolts to match their stainless wheel bolts range. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is chrome-plated and salt spray tested. 

Fits:
Porsche Boxster 986 / 987
Porsche 996 / 997
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608300002

The product you are viewing cross references to these numbers

Alternator fan belt sensor.

Fits:
Porsche 964 C2 / C4 1992-94
Porsche 993 C2 / C4 1994-97
Porsche 993 Turbo 1994-97

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

The 99310603500 Alternator Fan Belt Sensor is a component designed for use in Porsche 964 and 993 models, specifically addressing the alternator and fan belt system. This sensor plays a critical role in monitoring and ensuring the proper functioning of the alternator belt, which is essential for the vehicle's electrical system and overall performance.

Key Information:

Part Number: 99310603500

Application: Porsche 964 / 993

Function and Application:

Monitoring Belt Tension: The alternator fan belt sensor is designed to monitor the tension of the alternator belt.

Alert System: If the sensor detects abnormal tension or a potential issue with the fan belt, it triggers an alert or warning signal.

Preventing Belt Failure: By monitoring the belt tension, the sensor helps prevent issues such as slippage or breakage, ensuring the continuous operation of the alternator and the proper charging of the vehicle's electrical system.

Importance of the Alternator Fan Belt Sensor:

The alternator fan belt is crucial for the functioning of the alternator, which plays a key role in charging the vehicle's battery and powering electrical components. The sensor helps prevent potential belt-related issues that could lead to alternator failure, electrical system malfunctions, or battery discharge.

Quality and Reliability:

Crafted to meet Porsche's high standards for quality and reliability, the 99310603500 Alternator Fan Belt Sensor is engineered to withstand the demands of the automotive environment. Its precise monitoring ensures early detection of potential problems, contributing to the overall reliability and performance of Porsche 964 and 993 models.

Whether you are conducting routine maintenance or addressing specific concerns related to the alternator and fan belt system in your Porsche, the alternator fan belt sensor is a critical component for ensuring the optimal functioning of the electrical system. Trust in the quality and engineering excellence of Porsche to maintain the performance of these iconic models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99310603500

The product you are viewing cross references to these numbers

Horn Low/High-Pitched.



Fits:
Porsche 970.1 Panamera 2009-2013

This product supersedes Porsche's old part numbers:
- 97063512500 (LOW) / 97063512600 (HIGH)
- 97063502100 (LOW) / 97063502200 (HIGH)
- 97063502101 (LOW) / 97063502201 (HIGH)

The 97063502202 High-Pitched Tone and 97063502102 Low-Tone Horn are components designed for use in Porsche 970.1 Panamera models, specifically addressing the vehicle's audible warning system. These tones and horns play crucial roles in enhancing safety and alertness.

97063502202 High-Pitched Tone:

Purpose: The high-pitched tone is likely associated with functions such as the horn or other warning signals.

Application: This tone is used for alerting purposes, similar to the high-pitched tone in the Cayenne models. It may be activated when the horn is used or when there's a need for a high-frequency audible warning.

97063502102 Low-Tone Horn:

Purpose: The low-tone horn is typically used as the main horn function, contributing to the audible warning system of the vehicle.

Application: This horn is likely the primary audible warning device, used for signaling to other drivers, pedestrians, and in emergency situations.

Both the high-pitched tone and low-tone horn, represented by part numbers 97063502202 and 97063502102, respectively, adhere to Porsche's high standards for quality, durability, and reliability. These components are designed to seamlessly integrate into the Panamera's electrical system, ensuring effective and clear audible warnings when needed.

Whether you are performing routine maintenance, addressing specific concerns related to the audible warning system, or seeking to enhance safety features in your Porsche Panamera, these components are essential for maintaining the safety and alertness features integral to the driving experience in these models. Trust in the quality and engineering excellence of Porsche to ensure the effectiveness of these critical safety elements.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97063502

The product you are viewing cross references to these numbers

Horn Low / High-Pitched.

Fits:
Porsche 955 Cayenne MKI 2003-06
Porsche 957 Cayenne MKII 2007-10

The 95563502201 High-Pitched Tone and 95563502101 Low-Tone Horn are components designed for use in Porsche 955 Cayenne and 957 Cayenne models, specifically addressing the vehicle's audible warning system. These tones and horns are crucial elements for safety and alertness, serving different purposes in the overall warning system.

95563502201 High-Pitched Tone:

Purpose: The high-pitched tone is commonly associated with functions such as the horn or other warning signals.

Application: This tone is likely used for alerting purposes, such as when the horn is activated or when there's a need for a high-frequency audible warning.

95563502101 Low-Tone Horn:

Purpose: The low-tone horn is typically used for the main horn function, contributing to the audible warning system of the vehicle.

Application: This horn is the primary audible warning device and is often used in conjunction with the high-pitched tone for various alerts, such as signaling to other drivers, pedestrians, or in emergency situations.

Both the high-pitched tone and low-tone horn, represented by part numbers 95563502201 and 95563502101, respectively, are engineered to meet Porsche's high standards for quality, durability, and reliability. They are designed to seamlessly integrate into the vehicle's electrical system, ensuring effective and clear audible warnings when needed.

Whether you are conducting routine maintenance, addressing specific concerns related to the audible warning system, or looking to enhance safety features in your Porsche Cayenne, these components are essential for maintaining the safety and alertness features integral to the driving experience in these models. Trust in the quality and engineering excellence of Porsche to ensure the effectiveness of these critical safety elements.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95563502

The product you are viewing cross references to these numbers

Radiator Air Conditioning (Air Con) Resister. Porsche 964 / 993

Fits:
Porsche 964 1989-94
Porsche 993 1994-97

Click picture for large parts diagram.
Diagram Ref No 23.

The 99361652102 Radiator Air Conditioning Resistor is a crucial component designed for use in Porsche 964 and 993 models, specifically addressing the air conditioning (A/C) system. This precision-engineered resistor plays a key role in regulating the blower motor speed within the A/C system, contributing to the overall efficiency and performance of the vehicle's climate control.

The resistor is part of the A/C system's climate control unit and is responsible for modulating the electrical current to the blower motor. By adjusting the resistance, the resistor controls the speed of the blower motor, thereby regulating the airflow and temperature inside the vehicle's cabin. This functionality is essential for achieving optimal comfort and climate control for the occupants.

Crafted to Porsche's exacting standards, the 99361652102/1 Radiator Air Conditioning Resistor is made from high-quality materials, ensuring durability and reliability in various operating conditions. Its precise engineering ensures seamless integration into the A/C system, allowing for accurate control of the blower motor and contributing to the overall performance of the vehicle's climate control system.

Whether you are performing routine maintenance or addressing specific A/C system concerns in your Porsche 964 or 993, the 99361652102/1 Radiator Air Conditioning Resistor is a critical component to consider. Trust in the quality and engineering excellence of Porsche to maintain the comfort and climate control features that are integral to the driving experience in these iconic models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99361652102

The product you are viewing cross references to these numbers