OE Match

Centre undertray.

Fits:
Porsche 991.1 2012-16
Porsche 991.2  2017-19
Porsche 991 Turbo 2014-20
Porsche 981 Boxster 2012-16
Porsche 982 (718) Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C (718C) Cayman 2017>>

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460300

The product you are viewing cross references to these numbers

Front undertray cover.


Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460109

The product you are viewing cross references to these numbers

Door Lock RHD / LEFT SIDE Cars
This lock is designed for the left front door of the Porsche Boxster (986) and 911 (996) models. It securely locks and integrates with the vehicle's locking system and central locking module, ensuring secure closing, reliable locking/unlocking, and proper connection to the door handle, latch, and vehicle electrical system. Built to original specification for secure fitment, reliable operation and long-term durability

Fits:
Porsche Boxster 986 from 1998 onwards
* with M534/M535 Theft Security System

Porsche 996 1998 - 2005
* with M534/M535 Theft Security System

Diagram ref no 14

• Position on Vehicle: Left-hand (driver’s side) front door lock assembly, integrated into the door latch/lock mechanism and electrically connected to central locking system.

• Cross-Reference / Alternative Numbers: OEM number: 3B2 837 015 F (3B2837015F)

•  Applications: Replacement when original door lock is worn, failing to lock/unlock properly, noisy, mis-aligned or when restoring the door mechanism during bodywork or refurbishment.

A properly functioning door lock is integral to vehicle security, safe operation and user convenience. When the lock mechanism begins to wear, fail or mis-operate you may experience doors that won’t latch securely, central locking faults, key remote issues or increased noise/vibration. Replacing the unit restores secure locking, correct door alignment and peace of mind.

When and why to replace:
• Door fails to stay locked or latch properly.
• Key remote or central locking system reports fault or inconsistent behaviour.
• Audible clicking, grinding or resistance when operating door lock/unlock.
• After door removal, panel replacement, accident repairs or restoration where access to the lock assembly already occurs.
• On older vehicles where original door lock mechanisms are approaching wear limits or have inconsistent performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3B2837015F

The product you are viewing cross references to these numbers

Drop link rear. 
Sold each - 2 required per car



Fits:
Porsche 971.1 Panamera - 2017 to 2020
With Option Code
1P0 - Standard Suspension

Porsche 971.2 - 2021 to 2023
Porsche 9J1 Taycan - 2020 Onwards
With Option Code
1P7 - PDCC/eAWS

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971511467E

The product you are viewing cross references to these numbers

This vacuum pump is a component in the brake servo (brake booster) system in various Porsche models (Boxster/Cayman, 997, 991, etc.). It helps generate the vacuum needed by the brake booster so that the driver has power assistance when applying the brakes.

In many modern Porsche engines (especially at higher performance levels, forced induction, or in engines where manifold vacuum is insufficient under certain operating conditions), an auxiliary vacuum pump is used because the engine’s intake manifold vacuum alone may not always provide adequate or stable vacuum for the brake booster.

The pump is typically driven mechanically (via the engine belt, accessory drive, or via an electric drive depending on vehicle) and draws vacuum from a chamber, then supplies that vacuum to the brake booster. Because the brake booster relies on consistent vacuum, degradation or failure of this pump can lead to harder brake pedal efforts or weak assistance under certain conditions.

Loss of vacuum / reduced vacuum output As the pump wears, internal leaks (seals, vanes, diaphragms) reduce its ability to maintain the required vacuum level. This causes the brake servo to get less assist, making the pedal feel harder.

Fits:

• Porsche Boxster 987 MKII 2.9L 2009-2012
• Porsche Boxster S 987 MKII 3.4L 2009-2012
• Porsche Boxster 981 2.7L 2012-16
• Porsche Boxster 981 S / GTS 3.4L 2012-16
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13
• Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
• Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
• Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
• Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
• Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
• Porsche Cayman 2.9L 987C MKII 2009-12
• Porsche Cayman S / R 3.4L 987C MKII 2009-12
• Porsche Cayman 2.7L 981 2013-16
• Porsche Cayman S / GTS 3.4L 981 2013-16

Diagram ref no 10

This pump generates the vacuum required by the brake booster (servo), allowing the system to amplify pedal force for smooth, consistent braking. By maintaining the correct vacuum pressure under varying engine loads, it ensures stable braking response and driver confidence.

Why replacement matters:

• Intermittent vacuum supply. Pump may fail or fluctuate in output under certain engine speeds or loads, leading to inconsistent pedal feel.
• Mechanical wear / bearing failure. The internal rotating components, bearings, or drive shaft can wear, leading to noise, inefficiency, or eventual seizure.
• Leaks (external or internal). Seal failure can cause air leaks (vacuum loss) or allow unmetered air into the system, reducing servo effectiveness.
• Cracks, housing damage or corrosion. Over time, housing cracks or corrosion can affect integrity and result in leaks or mechanical failure.
• Failure of check valves / one-way valves. Some pump assemblies include check valves to maintain vacuum or prevent backflow; if these fail, vacuum can be lost.
• Age / fatigue. After many years and many duty cycles, material fatigue and seal degradation can degrade performance even without catastrophic failure.
• Associated component failure. Blocked vacuum lines, failed hoses, or clogged filters can mimic pump failure; sometimes the pump is replaced during diagnosis or when other parts are replaced.

Replacing with an OE Match unit restores factory-level performance, reliability, and safe braking operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A111009008

The product you are viewing cross references to these numbers

Rear upper centre track control arm.

Sold each - 2 required per car  




Fits:
Porsche 971.1 Panamera - 2017 to 2020
Porsche 971.2 Panamera - 2021 to 2023

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971505323B

The product you are viewing cross references to these numbers

Track rod inner joint. 
Sold each - 2 required per car



Fits:
Porsche 992 - 2019 onwards
Porsche 992 turbo - 2020 onwards
Porsche 992 GT3 / GT3 RS - 2021 onwards

Click 'Zoom in' for large parts diagram.
Diagram ref no 3


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992423810

The product you are viewing cross references to these numbers

Hydro mounting front lower wishbone



Fits:
Porsche 971.2 Panamera - 2021 to 2023
Porsche 9JA Taycan - 2020 Onwards

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97140718

The product you are viewing cross references to these numbers

Control arm, Rear, Upper. 



Fits:

Porsche 991.1 2012-16

Porsche 991.2 2017>>

Porsche 991 Turbo 2014>>

Porsche 992 Carrera 2019>>
For cars with Standard rear axle (option code: 0N1)

Porsche 992 Turbo 2020>>
For cars with Standard rear axle (option code: 0N5)

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505237B

The product you are viewing cross references to these numbers

Rear trailing arm. Axle guide.




Cars with standard rear axle (option code: 0N1 / 0N5)
Porsche 991.2 Carrera 2019>>  
Porsche 991.2 Turbo 2020>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P150522

The product you are viewing cross references to these numbers

Track rod for rear suspension.



Fits:
Porsche 992 Carrera 2019>>
with Standard rear axle (option code: 0N1)

Click 'Zoom in' for large parts diagram,
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992501529

The product you are viewing cross references to these numbers

Rear wishbone, Lower.



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 991 Turbo / GT2 2014>>

Porsche 992 Carrera - 2019>>
Porsche 992 turbo - 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505311

The product you are viewing cross references to these numbers

Rear wishbone, Upper.



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 997 Turbo 2014>>
Porsche 991 GT3 2014-17
Porsche 991 GT3 2018>> Cars produced before 31.08.2017

Porsche 992 Turbo / Turbo S

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505397A

The product you are viewing cross references to these numbers

Track Rod. Porsche 981 Boxster / 981C Cayman / 991 (Price is for each)



Fits:
Porsche 981 Boxster 2012>>
Porsche 981C Cayman 2014>>
Porsche 991 Carrera 2012>>
Porsche 991 Turbo 2014>>
Porsche 991 GT3 2014>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99134713100

The product you are viewing cross references to these numbers

High pressure fuel pump. 

Fits:
Porsche 718 Boxster 2.0ltr / 2.5ltr - 2017 Onwards
Porsche 718 Cayman 2.0ltr / 2.5ltr - 2017 Onwards
Porsche 991.2 - 2017 to 2019

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A211031502

The product you are viewing cross references to these numbers