Nordschleife

Special key for timing belt replacement, 27mm.
Made in Germany



Fits:
Porsche 924S
Porsche 944
Porsche 968

Description:
The tool is for loosening and tightening the hard to reach running / tensioning rollers and allows a secure and defined tightening.

The tool has been specially developed for this application only and allows the correct replacement of the balance shaft belt and / or timing belt. The narrow design of the keyhole and the double offset offer the best possible accessibility to the key areas behind the rollers.

The key is 100% German produced. Material and component geometry were designed for the maximum load cases in this application. The corrosion protection is galvanic blue galvanizing.

Note:
Only an outdated 24mm wide version of the tool is available at Porsche although the manufacturers of the wheels are already adjusted to 27mm.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1130

The product you are viewing cross references to these numbers

Alternator lock tool.
Porsche ref no 012281A.

Fits:
Porsche 356 A / B / C

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1080

The product you are viewing cross references to these numbers

Special key for locking the balance shafts.
Porsche ref no 00072192000.



Fits:
Porsche 924 S
Porsche 944
Porsche 968

This tool is necessary for the exchange of the timing belt and allows the countering of the wheels during the process.

Made in Germany.

Note:
Trying to block the waves with pliers or lever is strongly discouraged: Not only by slipping the tool, but also by burrs on the roller, the new belt can be damaged.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1113

The product you are viewing cross references to these numbers

Clutch alignment tool.
This tool is necessary for a professional assemblage of the clutch.



Fits:
For Vehicles with manual transmission
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 981C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1089

The product you are viewing cross references to these numbers

Clutch alignment tool.
This tool is necessary for a professional assemblage of the clutch.



Fits:
For Vehicles with manual transmission
Porsche 912
Porsche 914



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1090

The product you are viewing cross references to these numbers

Clutch alignment tool.
This tool is necessary for a professional assemblage of the clutch.



Fits:
For Vehicles with manual transmission
Porsche 911 G (1 of 3 possible variants, this one has 23 teeth)
Porsche 924 S / 924 Turbo
Porsche 944 / 944 Turbo
Porsche 928
Porsche 968
Porsche 964
Porsche 993
Porsche 996

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1086

The product you are viewing cross references to these numbers

Clutch alignment tool.
This tool is necessary for a professional assembly of the clutch.



Fits:
For Vehicles with manual transmission
Porsche 911 G (1974 - 1986) 915 transmission
Number of teeth 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1088

The product you are viewing cross references to these numbers

Clutch alignment tool.
This tool is necessary for a professional assemblage of the clutch.



Fits:
For Vehicles with manual transmission
Porsche 356
Porsche 911 F
Porsche 911 G (1 of 3 possible variants, this has 24 teeth)
Porsche 924 2.0 L (except Turbo)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1087

The product you are viewing cross references to these numbers

Camber adjustment tool. Rear axle.
Porsche ref number 00072191710

Fits:
Porsche 911
Porsche 968
Porsche 944

This special tool fits all Porsche 911, 924/944/968 trailing arm rear axles with torsion bar suspension and is used to adjust the camber.
For the adjustment, the vehicle is jacked up, the semi-trailing arm with the two screw connections released and rotated by means of this eccentric tool against the axle swords.

The tool has a galvanized surface with passive layer.
Quality "Made in Germany"

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1118

The product you are viewing cross references to these numbers

Flywheel locking tool.
Porsche ref no 00072191610



Fits:
Porsche 928 4.5L / 928S until 1982
NOT suitable for 928 S from year of construction 83

The locking tool is placed on the receiving points of the clutch slave cylinder, thus blocking the crankshaft via the ring gear. It is an indispensable special tool for working on the engine. The tool can be set free of play thanks to the long hole.

Made in Germany. The surface is galvanized.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1147

The product you are viewing cross references to these numbers

Flywheel locking tool.
Porsche ref no 00072191611



Fits:
Porsche 928 from model year 1983
Porsche 928 S / S4 / GT / GTS
NOT suitable for 928 4.5L before year 83

The locking tool is placed on the receiving points of the clutch slave cylinder, thus blocking the crankshaft via the ring gear. It is an indispensable special tool for working on the engine. The tool can be set free of play thanks to the long hole.

Made in Germany. The surface is galvanized.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1146

The product you are viewing cross references to these numbers

Flywheel locking tool.
Porsche ref no 00072192060



Fits:
Porsche 924 S
Porsche 944 (also S, S2, turbo)


This locking tool is used to replace the timing belts as a locking device of the crankshaft and is designed to fit play-free due to the slotted hole.

Made in Germany. The surface is galvanized.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1085

The product you are viewing cross references to these numbers

Front indicator glasses, Clear.
PAIR



Fits:
Porsche 924
Porsche 944 except S2 / Turbo

Note:/b>
The turn signals are only for motorsport and show purposes outside the StVZO use.

Quality:
These turn signals were manufactured in elaborate handwork and are "Made in Germany". Due to the amount of work involved, higher production costs result than with indicator glasses from automated mass production.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1135

The product you are viewing cross references to these numbers

Plug repair kit for fuel injectors including grommet.
Reference numbers: 357972741A, 37906240.



Fits:
Porsche 924 S
Porsche 944
Porsche 968
Porsche 928


Description:
This repair kit is used to overhaul the plugs for the injectors. As a rule, the clips break off at the plugs after the years and the rubber grommet is cracked by its kinked position on the valve. As a result, moisture penetrates to the plug contacts and cause them to corrode. If you do not want to procure a completely new engine wiring harness right away, you can use this repair kit to replace the plug-in contacts in the original way.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

5109

The product you are viewing cross references to these numbers

Timing chain service kit. Quality made in Germany.
Contents: Timing chain set (timing chain both shoes and screws), valve cover sealing set (see picture)



Fits:
Porsche 928 S 5.0 (85 - 94) two maintenance kits required
Porsche 928 S4 (86 - 91) two maintenance kits required
Porsche 928 GT (89 - 91) two maintenance kits required
Porsche 928 GTS (91 - 95) two maintenance kits required
Porsche 944 S (86-88)
Porsche 944 S2 (89-91)


Description:
The four-valve technology is one of the sensitive parts of these otherwise robust engines: A regular replacement of the chain and its sliding elements is essential to avoid major damage. Combined with the sealing kit for the valve cover, you will receive all the parts you need to carry out the repair professionally.

Note:
For many vehicles over the years for cost reasons, only the upper shoe and the chain was changed. But even the lower shoe enters and becomes porous. Therefore, better anticipate the risk and take a look under the valve cover.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1232

The product you are viewing cross references to these numbers

1 set of retaining arms to repair defective.



Fits:
For vehicles without airbag
Porsche 944 II ('85 -'91)
Porsche 968 (also CS)

• Simple and solid repair solution in original design
• Quality "Made in Germany"

Note:
The geometry corresponds to "1 to 1" the original holding arms and is thus unique in the market.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1115

The product you are viewing cross references to these numbers