Nitron

Front and rear NTR R1 suspension kit.

Fits
Porsche 996 Carrera 4 - 1997 to 2005
Porsche 996 Carrera 4S - 2001 to 2005
Porsche 996 turbo / turbo S - 200 to 2005
For road and track use

The Nitron NTR RoadSport system offers unrivalled performance and value with a design that gives drivers a wide range of effective and easy to use damping control.

Combined 2-way damping adjustment Developed for fast road drivers who occasionally want to take their car to the track. The NTR RoadSport kit provides exceptional performance whilst retaining the OEM top mounts to ensure OEM levels of comfort and noise.

NTR RoadSport kit gives uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components.
The ultra high-grade materials protect against corrosion whilst reducing weight.

Every NTR RoadSport kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.

Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron NTR shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO027RS

The product you are viewing cross references to these numbers

Front and rear NTR R1 suspension kit.

Fits
Porsche 996 Carrera 4 - 1997 to 2005
Porsche 996 Carrera 4S - 2001 to 2005
Porsche 996 turbo / turbo S - 200 to 2005

Standalone Front Axle Lift system raises height by 25mm at the shock absorber

Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.

NTR R1 System offers unrivalled performance and value with a design that gives drivers a wide range of effective, easy to use damping control.

2-Way combined damping adjustment.
Developed from our full race suspension and sharing many components with the R3 system, the R1 offers exceptional performance, reliability and value for both road and track use. Widely praised by drivers around the world and respected for out-performing considerably more expensive suspension kits.

R1 kits provides uncompromising quality, reliability and performance without the need for a remote canister. Fade-resistant and hand built with ultra-low friction components, the R1 shock is made to last on the road and track.

The high-grade materials protect against corrosion whilst reducing weight. Every R1 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only season after season, but also the harshest of winters.

Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements.
Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO027R1

The product you are viewing cross references to these numbers

Front and rear NTR R3 trackday and race suspension kit.

Fits
Porsche 996 Carrera 4 - 1997 to 2005
Porsche 996 Carrera 4S - 2001 to 2005
Porsche 996 turbo / turbo S - 200 to 2005

Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.

This kit is the hose and remote reservoir type
Standalone Front Axle Lift system raises height by 25mm at the shock absorber

The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.

3-Way independent damping adjustment
By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment.
The remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car.
The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.

The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.

Bi-Axis Hose Fittings
NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.
R3 kits have dry-breaks on front hoses only

Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO027R3

The product you are viewing cross references to these numbers

Front and rear NTR R3 trackday and race suspension kit.

Fits
Porsche 997 Cup - 2006 to 2012
For Competition Use Only

Kits are supplied complete, ready to fit with Nitron race springs (including helpers where required) and top mounts.
This kit is the hose and remote reservoir type

The NTR R3 system sets the standard for ultimate performance with a design that offers drivers and engineers unparalleled damping control.

3-Way independent damping adjustment
By incorporating our class leading large diameter piston and ultra-strong piston rod, the R3 system demonstrates outstanding levels of performance, damping control and adjustment.
The remotely mounted reservoir allows quick and simple independent adjustment of rebound and fast and slow compression damping. The large range of adjustment and quality of feedback allows the experienced driver to fully exploit the full potential of their car.
The R3 is a proven race winner and lap record holder across a wide spectrum of international motorsport formulas.

The high-grade materials protect against corrosion whilst reducing weight. Every R3 kit is custom built, sprung and fully serviceable. Titanium and hard-anodised parts are hand built to last not only the lengthiest endurance races, season after season, but also the harshest of winters.

Bi-Axis Hose Fittings
NTR Hose shocks are fitted with Nitrons exclusively developed Bi-Axis fittings that allow for simple and precise installation.
R3 kits have dry-breaks on front hoses only

Note:
Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer.

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 981 Cayman GT4 - 2015 to 2016

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO031ER3

The product you are viewing cross references to these numbers

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 981 Boxster 2.7ltr - 2012 to 2016
Porsche 981 Boxster S / GTS  3.4ltr - 2012 to 2016
Porsche 981 Cayman 2.7ltr - 2013 to 2016
Porsche 981 Cayman S / GTS 3.4ltr - 2013 to 2016

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO030ER3

The product you are viewing cross references to these numbers

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 981 Boxster 2.7ltr - 2012 to 2016
Porsche 981 Boxster S / GTS  3.4ltr - 2012 to 2016
Porsche 981 Cayman 2.7ltr - 2013 to 2016
Porsche 981 Cayman S / GTS 3.4ltr - 2013 to 2016

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO038ER3

The product you are viewing cross references to these numbers

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 991.1 GT3 
Porsche 991.1 GT3 RS 
Porsche 991.1 R
Porsche 991.2 GT3
Porsche 991.2 GT3 RS
Porsche 991.2 GT2 RS

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO0

The product you are viewing cross references to these numbers

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 991.1 / 991.2 Carrera 2 / Carrera 4
Porsche 991.1 / 991.2 Carrera 2S / Carrera 4S
Porsche 991.1 / 991.2 Carrera GTS / Carrera 4 GTS
Porsche 991.1 / 991.2 Carrera targa  / Carrera targa 4S
Porsche 991.1 / 991.2 turbo / turbo S

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO025ER3

The product you are viewing cross references to these numbers

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 997.1 / 997.2 Carrera 4
Porsche 997.1 / 997.2 Carrera 4S
Porsche 997.1 / 997.2 Carrera 4 GTS
Porsche 997.1 / 997.2 turbo / turbo S

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO026ER3

The product you are viewing cross references to these numbers

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 997.1 / 997.2 Carrera 2
Porsche 997.1 / 997.2 Carrera 2S
Porsche 997.1 / 997.2 Carrera 2 GTS

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO022ER

The product you are viewing cross references to these numbers

elec-TRON R3 Suspension Kit Front and Rear.

Fits
Porsche 997 GT3 / GT3 RS 
Porsche 997 GT3 RS 4.0Ltr
Porsche 997 GT2 3.6ltr
Porsche 997 GT2 RS 3.6ltr

Nitron elec-TRON R3 suspension Kit
This advanced setup combines manual high- and low-speed compression adjustment to set the baseline, while the elec-TRON valve actively adjusts in real time to match driving conditions.
For optimal performance, our elec-TRON kits pair with the standalone elec-TRON-DCU (sold separately), which precisely adjusts damping every 6 milliseconds based on driving dynamics. They are also fully compatible with the DSC Sport box, enabling OEM controls to work flawlessly with our suspension kits.

Please note: This kit is compatible with Porsche PASM system, so no additional products are required.
Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation - Kits have dry-breaks on front hoses only

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO023ER

The product you are viewing cross references to these numbers

elec-TRON R1 Suspension Kit Front and Rear.

Fits
Porsche 997 GT3 / GT3 RS 
Porsche 997 GT3 RS 4.0Ltr
Porsche 997 GT2 3.6ltr
Porsche 997 GT2 RS 3.6ltr

Nitron elec-TRON R1 Kit
The elec-TRON R1 coilover kit utilises the Nitron proportional solenoid valve with all of the damping control being carried out by the control system. This kit includes our adjustable top mounts and uses our race springs, giving you the ultimate adjustment for a perfect geometry setup.
Please note: This kit is compatible with Porsche PASM system, so no additional products are required.

Standalone Front Axle Lift system raises height by 25mm at the shock absorber

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation.

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO023ER

The product you are viewing cross references to these numbers

elec-TRON R1 Suspension Kit Front and Rear.

Fits
Porsche 997.1 / 997.2 Carrera 2
Porsche 997.1 / 997.2 Carrera 2S
Porsche 997.1 / 997.2 Carrera 2 GTS

Nitron elec-TRON R1 Kit
The elec-TRON R1 coilover kit utilises the Nitron proportional solenoid valve with all of the damping control being carried out by the control system. This kit includes our adjustable top mounts and uses our race springs, giving you the ultimate adjustment for a perfect geometry setup.
Please note: This kit is compatible with Porsche PASM system, so no additional products are required.

Standalone Front Axle Lift system raises height by 25mm at the shock absorber 

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation.

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO022ER

The product you are viewing cross references to these numbers

elec-TRON R1 Suspension Kit Front and Rear.

Fits
Porsche 997.1 / 997.2 Carrera 4
Porsche 997.1 / 997.2 Carrera 4S
Porsche 997.1 / 997.2 Carrera 4 GTS
Porsche 997.1 / 997.2 turbo / turbo S

Nitron elec-TRON R1 Kit
The elec-TRON R1 coilover kit utilises the Nitron proportional solenoid valve with all of the damping control being carried out by the control system. This kit includes our adjustable top mounts and uses our race springs, giving you the ultimate adjustment for a perfect geometry setup.
Please note: This kit is compatible with Porsche PASM system, so no additional products are required.

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation.

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO026ER1

The product you are viewing cross references to these numbers

elec-TRON R1 Suspension Kit Front and Rear.

Fits
Porsche 991.1 / 991.2 Carrera 2 / Carrera 4
Porsche 991.1 / 991.2 Carrera 2S / Carrera 4S
Porsche 991.1 / 991.2 Carrera GTS / Carrera 4 GTS
Porsche 991.1 / 991.2 Carrera targa  / Carrera targa 4S
Porsche 991.1 / 991.2 turbo / turbo S

Nitron elec-TRON R1 Kit
The elec-TRON R1 coilover kit utilises the Nitron proportional solenoid valve with all of the damping control being carried out by the control system. This kit includes our adjustable top mounts and uses our race springs, giving you the ultimate adjustment for a perfect geometry setup.
Please note: This kit is compatible with Porsche PASM system, so no additional products are required.

BI-AXIS HOSE FITTINGS
Nitron Hose shocks are fitted with Nitron's exclusively developed Bi-Axis fittings that allow for simple and precise installation.

Note: Image used for illustration purposes only. Specific details, finishes and end fittings may differ from that shown.

All Nitron shocks are hand made to order to each individual customer's requirements. Lead times are normally 2 - 3 weeks, but at certain times may be slightly longer. If you would like a more accurate delivery time please contact us.

Presenting the Nitron elec-TRON Range
Nitron Suspension proudly introduces the elec-TRON range, a fusion of world-renowned Nitron quality and attention to detail, combined with cutting-edge electronic valve technology. At the heart of the system is Nitron’s proportional solenoid valve, delivering unparalleled precision and control over the damping system. Each shock absorber in the elec-TRON system is equipped with an independent valve, allowing for individual damping control at each wheel. This is essential for optimising handling, stability and ride comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NTCPO025ER1

The product you are viewing cross references to these numbers