Kits

Driveshaft Overhaul Kit Porsche 911 1969-75
repairs for 2 Driveshafts (FOR THE 4 BOLT DRIVE SHAFT TYPE)

4 X DRIVE SHAFT GASKET
4 X BELLOW CLIP
16 X SUSPENSION WASHER FOR M10 BOLT
4 X CV JOINT BOOT KIT "GKN"
16 DRIVE SHAFT BOLT 911

Fits:
Porsche 911 1969-75
Porsche 911 TURBO 1975-77
Porsche 911 TURBO 1978-86
for 4 bolt driveshaft type

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DRIVESHAFTKIT02

The product you are viewing cross references to these numbers

Driveshaft overhaul kit.
Repairs for 2 driveshafts

Fits:
Porsche 911 1965-68
Porsche 914 1970-76
(for 6 Bolt drive shaft type)

24 x PAN HEAD SCREW M8X45
2 x BELLOW CLAMP SMALL
24 x LOCK WASHER FOR M8 BOLT
4 x CV JOINT BOOT KIT 911 1965-68 / 914 1970-76 "GKN" (size dia 1 - 21mm, dia 2 - 94mm, Height 100mm)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DRIVESHAFTKIT01

The product you are viewing cross references to these numbers

Shock Absorber Front & Rear. Porsche 911 09/1965- 08/1968 Koni for Boge Strut



Fits:
Porsche 911 09/1965 - 08/1968
for original Boge struts only

They have the same superior qualities which the KONI Specials offer to modern cars.

Classic shock absorbers are finished with the traditional black or red gloss (Identified as black or red and "wing" logo).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT31

The product you are viewing cross references to these numbers

Shock Absorbers Front & Rear. Porsche 911 09/1965 - 08/1968 Koni for Koni Strut



Fits:
Porsche 911 09/1965 - 08/1968
for original Koni struts only

They have the same superior qualities which the KONI Specials offer to modern cars.

Classic shock absorbers are finished with the traditional black or red gloss (Identified as black or red and "wing" logo).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT30

The product you are viewing cross references to these numbers

Horn Grilles with Additional Lamp Chrome Metal.



Fits:
Porsche 911 / 912 1969-73
(LWB) Long wheel base cars

Includes:
2 x Chrome Horn Grilles
2 x Chrome Drive lamps
2 x Drive lamp brackets

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

LIGHTKIT73

The product you are viewing cross references to these numbers

Service maintenance kit for Porsche 996 GT3  Oil, Air Filters,  Spark plugs, + More

With Bosch spark plugs

1 x Oil Filter
1 x Pollen Filter
1 x Air Filter
1 x Sump Plug Ring
6 X Spark Plugs

Fits:
Porsche 996 GT3 MK1
Porsche 996 GT3 MKII
Not for 996 GT3RS

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SERVICEPACK996

The product you are viewing cross references to these numbers

SET OF 4 Wheels. Front 7.0J ET55 & Rear 9.0J ET55
Replica replacement Fuchs style wheels.
BLACK CENTRE with MATT POLISHED outer rim.

Price is for SET OF 4 Wheels with FREE Centre Caps

Wheel Weights:
7.0J - Approx. 8.4kg
9.0J - Approx. 9.5kg

Recommend Tyres size:
7.0J = 215/4517 or 225/45/17
9.0J = 245/4017 or 255/40/17

If you purchase a "Wheel and Tyre package" we will build up and balance the wheels free of charge.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WHEELS17548-2

The product you are viewing cross references to these numbers

SACHS Clutch Kit Contains
Clutch plate, Pressure Plate and Release bearing.



Fits:
Porsche 912 1.6L

Kit Contains:
Clutch Disc
Clutch Pressure Plate
Clutch Release bearing

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CLUTCHKIT912

The product you are viewing cross references to these numbers

SACHS Clutch Kit Contains
Clutch plate, Pressure Plate and Release bearing.



Fits:
Porsche 911 2.2L 1970-71

Kit Contains:
Clutch Disc
Clutch Pressure Plate
Clutch Release bearing

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CLUTCHKIT9112.3

The product you are viewing cross references to these numbers

SACHS Clutch Kit Contains
clutch plate, pressure plate and release bearing.



Fits:
Porsche 911 2.2L Upto >> 1971

Kit Contains:
Clutch Disc
Clutch Pressure Plate
Clutch Release bearing

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CLUTCHKIT9112.2

The product you are viewing cross references to these numbers

SACHS Clutch Kit Contains
Clutch plate, Pressure Plate and Release bearing.



Fits:
Porsche 911 2.0ltr

Kit Contains:
Clutch Disc
Clutch Pressure Plate
Clutch Release bearing

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CLUTCHKIT9112.0

The product you are viewing cross references to these numbers

This kit contains 2 Indicator Lens for Rear light Unit. Price is for a SET OF 2

Fits:
Porsche 964 1990-94
Porsche 964 Turbo

This is Indicator lens for your existing rear indicator unit. Normally the lens is not interchangeable but the clever guys in developments have come up with a solution.

Tip:
a customer has discovered an easy way to get the old glass off, if you put the Light into an ordinary oven at a 100 degrees for 7-8 minutes the glass will come loose or use heat from a soldering iron to un-weld the lens off the unit, and the same to weld the new lens on again, please make sure you have a perfect seal around the edge.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

LIGHTKIT72

The product you are viewing cross references to these numbers

Bilstein Replacement FRONT and REAR shock absorbers Cars with I475 PASM



SET OF 4 for FRONT & REAR
Bilstein Replacement for the Original Spec

Fits: Cars with I475 PASM
Porsche Boxster 987 2005-08
Porsche Cayman 987C 2005-08
Cayman 2.9L 987C MKII 2009>>
Cayman S 3.4L 987C MKII 2009>>
Boxster 987 MKII 2.9L 2009-2012
Boxster S 987 MKII 3.4L 2009-2012

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BILSTEIN987B4P

The product you are viewing cross references to these numbers

Bilstein Replacement FRONT and REAR shock absorbers PACKAGE



SET OF 4 for FRONT & REAR
Bilstein Replacement for the Original Spec

Fits:
Porsche Boxster 987
Porsche Cayman 987C
ALL Cars with Standard Chassis
(*Not Cars with I475 PASM)

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BILSTEIN987B4

The product you are viewing cross references to these numbers

Bilstein Replacement FRONT and REAR shock absorbers PACKAGE, SET OF 4.



Bilstein Replacement for the Original Spec

Fits:
Porsche 997 C4 / C4S / Turbo - For vehicles with PASM, For vehicles with electronic suspension control

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BILSTEIN9974B4P

The product you are viewing cross references to these numbers

Bilstein Replacement FRONT and REAR shock absorbers PACKAGE



SET OF 4. Fits cars:
Standard Suspension - WITHOUT M030 or PASM suspension

Bilstein Replacement for the Original Spec

Fits:
Porsche 997 C4 / C4S - Cars with Standard chassis (Option code: I029)

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BILSTEIN9974B4

The product you are viewing cross references to these numbers