Kits

Koni Special Active shock absorber front & rear set.

Fits:
Porsche Boxster (986), incl. Boxster S 1996-2004

KONI Special ACTIVE is the next generation of premium shock absorbers that offer superior handling without compromise. It is the latest advancement in the KONI product portfolio. Utilizing the most recent generation of KONI's patented Frequency Selective Damping technology, it controls large body motions and cornering forces but smooths expansion joints and rough roads for improved comfort.

Advantages of Special Active Shock Absorbers:

• KONI's latest generation of Frequency Selective Damping Technology
• Improves safety and road holding
• Technology proven on over 1.5 million factory equipped vehicles
• Secure and stable feeling for spirited driving
• Unrivaled aftermarket solution can be fitted to most new and older cars
• Driving refinement for cars, trucks, SUVs, etc.
• Technology that rivals expensive Original Equipment electronic systems
• Performance for driver and comfort for passengers in one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT53

The product you are viewing cross references to these numbers

Koni Special Active shock absorber front & rear set.



Fits:
Porsche 911 (993) Carrera 2 (S) Coupé, Targa, Convertible 10.1993-09.1997 excl. Bilstein OEM Sport Susp.
Porsche 911 (993) Carrera 4 (S) Coupé, Targa, Convertible 10.1993-09.1997 excl. Bilstein OEM Sport Susp.
Porsche 911 (993) Turbo 03.1995-09.1997
excl. Bilstein OEM Sport Susp.

KONI Special ACTIVE is the next generation of premium shock absorbers that offer superior handling without compromise. It is the latest advancement in the KONI product portfolio. Utilizing the most recent generation of KONI's patented Frequency Selective Damping technology, it controls large body motions and cornering forces but smooths expansion joints and rough roads for improved comfort.

Advantages of Special Active Shock Absorbers:

• KONI's latest generation of Frequency Selective Damping Technology
• Improves safety and road holding
• Technology proven on over 1.5 million factory equipped vehicles
• Secure and stable feeling for spirited driving
• Unrivaled aftermarket solution can be fitted to most new and older cars
• Driving refinement for cars, trucks, SUVs, etc.
• Technology that rivals expensive Original Equipment electronic systems
• Performance for driver and comfort for passengers in one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT52

The product you are viewing cross references to these numbers

Koni Special Active shock absorber front & rear set.



Fits:
Porsche 911 (964) C2 / C4 Coupé, Targa & Convertible 01.1991-09.1993
Porsche 911 (964) Turbo (S) 08.1990-09.1993

KONI Special ACTIVE is the next generation of premium shock absorbers that offer superior handling without compromise. It is the latest advancement in the KONI product portfolio. Utilizing the most recent generation of KONI's patented Frequency Selective Damping technology, it controls large body motions and cornering forces but smooths expansion joints and rough roads for improved comfort.

Advantages of Special Active Shock Absorbers:

• KONI's latest generation of Frequency Selective Damping Technology
• Improves safety and road holding
• Technology proven on over 1.5 million factory equipped vehicles
• Secure and stable feeling for spirited driving
• Unrivaled aftermarket solution can be fitted to most new and older cars
• Driving refinement for cars, trucks, SUVs, etc.
• Technology that rivals expensive Original Equipment electronic systems
• Performance for driver and comfort for passengers in one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT51

The product you are viewing cross references to these numbers

Koni Special Active shock absorber front & rear set.



Fits:
Porsche 911 (996) Carrera 2 (S) Coupé 09.1997-08.2005 Excl. GT2, GT3, excl. PASM
Porsche 911 (996) Carrera 2 (S) Targa, Convertible 09.1997-08.2005 Excl. GT2, GT3, excl. PASM

KONI Special ACTIVE is the next generation of premium shock absorbers that offer superior handling without compromise. It is the latest advancement in the KONI product portfolio. Utilizing the most recent generation of KONI's patented Frequency Selective Damping technology, it controls large body motions and cornering forces but smooths expansion joints and rough roads for improved comfort.

Advantages of Special Active Shock Absorbers:

• KONI's latest generation of Frequency Selective Damping Technology
• Improves safety and road holding
• Technology proven on over 1.5 million factory equipped vehicles
• Secure and stable feeling for spirited driving
• Unrivaled aftermarket solution can be fitted to most new and older cars
• Driving refinement for cars, trucks, SUVs, etc.
• Technology that rivals expensive Original Equipment electronic systems
• Performance for driver and comfort for passengers in one

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT50

The product you are viewing cross references to these numbers

Replacement Wheel Bolt 20 pcs Standard Size



Fits:
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman
Porsche 991.1 &991.2
Porsche 981 Boxster

Porsche 992
Porsche Macan

Porsche Panamera

Length 61 mm
Outer thread M14 x 1,5 mm
Thread Length 20 mm
Quality/ Grade 10.9
Spanner Size 19
Bolt Head-/Nut Design Male Hex
Wheel Fastening Ball seat A/G
Surface Geomitrised
Screw length below head 29 mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99736120302KIT

The product you are viewing cross references to these numbers

Nuts & bolts for control arm 'Coffin Arm' & wishbones
FRONT



FRONT
Porsche 997
Porsche 987 Boxster >>2007
Porsche 987C Cayman >>2007

Please click 'Zoom in' to view the diagram
Items 4, 5, 7, 9, 10, 11, 12, 22, 25.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BOLTKIT9971

The product you are viewing cross references to these numbers

Heater box clamp with bolt, nut and lock ring. One complete clamp. 2 required per car.



Fits:
Porsche 356 / A 1950-59
Porsche 356 B / C 1960-65

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64421125100KIT

The product you are viewing cross references to these numbers

Full exhaust system made out of stainless steel including:
- Heat exchangers
- 100 Cell catalyst
- Race pipe - centre muffler bypass
- G-pipe - final muffler bypass
- 102mm angle cut tail pipe

This system will be very loud. Loudest combination possible. Track car sound. Comes with reduced catalyst, centre muffler bypass (race pipe) and final muffler bypass (G-pipe).


Fits:
Porsche 964 1989-94 (not Turbo)
*excluding Carrera 2 Tiptronic cars M64.02 engines

Fitting kit not included in price and available separately.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT63

The product you are viewing cross references to these numbers

Full exhaust system made out of stainless steel including:
- Heat exchangers
- 100 Cell catalyst
- Centre muffler (standard)
- G-pipe final muffler bypass
- 102mm angle cut tail pipe

This system will be a bit louder than standard system as it comes with reduced catalyst and final muffler bypass (G-pipe).

Fits:
Porsche 964 1989-94 (not Turbo)
*excluding Carrera 2 Tiptronic cars M64.02 engines

Fitting kit not included in price and available separately.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT62

The product you are viewing cross references to these numbers

Full exhaust system made out of stainless steel including:
- Heat exchangers
- 100 Cell catalyst
- Centre muffler (standard)
- Final muffler (standard)
- 102mm angle cut tail pipe

This system will be slightly louder than standard system as it comes with reduced catalyst. Rest of the system is as close to original as possible.

Fits:
Porsche 964 1989-94 (not Turbo)
*excluding Carrera 2 Tiptronic cars M64.02 engines

Fitting kit not included in price and available separately.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT61

The product you are viewing cross references to these numbers

Impulse / Speed Reference Sensor Adaptor Kit.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98

For more information see  technical document.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

ADAPTORKIT01

The product you are viewing cross references to these numbers

Rear silencer with heat exchangers and tail pipe kit.



Fits:
Porsche 356 A 1.6L 1955-59

This kit doesn't come with gaskets, bolts, nuts etc. All available separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT15

The product you are viewing cross references to these numbers

Rear silencer mild steel with heat exchangers and tail pipe kit.



Fits:
Porsche 356 B model T.5 Europe 1.6-2.0L

This kit doesn't come with gaskets, bolts, nuts etc. All available separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EXHAUSTKIT13

The product you are viewing cross references to these numbers

Targa Top Rear Folding Arms.
SET OF 2. LEFT and RIGHT.



Targa top rear folding arm (strut) for Porsche 911 models 1970-1985. This is a beautiful OEM specification reproduction in a high strength alloy. Available for left-rear and right-rear

Targa top frame arms often break at the hinge points due to metal fatigue and use of a brittle alloy in the original. This targa top frame arm is made from a superior Mg-Al alloy with a tensile strength more than 300% higher than the original.

Designed and developed using the latest state of the art 3D technology. Shape of the frame arms perfectly replicates the original. All openings are CNC milled to exact tolerances.

Replaces following OEM part numbers:
left rear – 901.565.211.45
right rear – 901.565.212.45

We guarantee factory authentic appearance, fit and function.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90156521KIT

The product you are viewing cross references to these numbers

21" Michelin tyres package 2 x 265/40/21 2 x 295/35/21

This brand new tyres package can be added to our 21"

Early steering angle sensors change to 3 parts



Fits:
For cars with M476 (Poorsche Stability Management (PSM)
Porsche 986 Boxster
Porsche 996

Click 'Zoom in' for large parts diagram.
Diagram ref no 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99660610902KIT

The product you are viewing cross references to these numbers