Kits

Titanium wheel bolt replacement stud set with black capless nuts.
Set of 20 studs and nuts

These studs replace the wheel bolts.

Studs are 65 mm long, with a 35 mm thread length on the wheel side.         

These replace factory wheel bolts for a much easier wheel installation and less wear on your wheel hubs. The bullet nose further makes for faster wheel changes, and a great look

Fits
Porsche 986 Boxster
Porsche 987 Boxster and Cayman
Porsche 996
Porsche 997
Porsche 991.1 & 991.2
Porsche 718 Boxster and Cayman
Porsche 992

These studs are made from Ti-6AL-4V alloy for extreme strength, and excellent rust
and corrosion resistance. Significantly lighter and stronger than steel, Ti6Al4V is ideal for
rotating parts. The studs are also vacuum coated for increased hardness and wear
resistance, and a sensational aspect
The bullet nose further makes for faster wheel changes, and a great look.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

HUBSTUDKIT65B

The product you are viewing cross references to these numbers

Rear boot lid and window dampers Porsche 957 Cayenne 

Set of 4 

## ##

Fits: 
Porsche 957 Cayenne - 2007 to 2010

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DAMPERKIT03

The product you are viewing cross references to these numbers

Rear shock absorber, for cars with PASM electronic damper control (option code: 475)
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
It is always recommended to replace shock absorbers in pairs. SET OF 2, Fits left and right side

Fits:
Replacement for cars with 'PASM' electronic damper control (option code: 475)
Porsche 981SP Boxster Spyder 2016
Porsche 982SP (718) Boxster Spyder 2019>>
Porsche 981C Cayman GT4 2016
Porsche 982C (718) Cayman 2019>>

Diagram ref no 1

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

 
Rear shocks wear out over time due to use, heat, and internal component fatigue. Worn dampers lose damping efficiency and can lead to:

• Harsh, unstable ride with excessive bouncing over bumps
• Degraded handling stability, especially under cornering or heavy braking
• Reduced tyre contact and increased tyre wear
• Less predictable rear-end behavior and reduced driving confidence

You should consider replacing rear shocks if:
•  The ride has become noticeably harsh or unsettled over bumps and uneven roads
•  You feel rear-end instability, sway, or reduced grip under braking or cornering
•  The rear suspension shows uneven behavior or the struts are old/mileage is high
•   You're performing rear suspension maintenance, upgrades, or full refresh
•   You want to restore factory-correct handling and comfort

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98133303596

The product you are viewing cross references to these numbers

These replacement FRONT shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
SET OF 2 - fits left and right  (shock absorbers should only be replaced in pairs.

Fits:
Porsche 991 GT3 / GT3 RS / Speedster

Replacement For cars with Option Codes
474 - Front axle lift function
475 - PASM electronic damper control

• These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
• They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
• For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers) 
•  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991343045A2

The product you are viewing cross references to these numbers

Rear boot lid and window dampers Porsche 955 Cayenne 

set of 4 

 

Fits: Porsche 955 Cayenne MKI 2003-06

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DAMPERKIT02

The product you are viewing cross references to these numbers

Front bumper GT3 Smile air vent conversion kit, including:  OEM vent, cutting template, and installation hardware.

Front Bumper Air-Outlet Grille Porsche 997 Models.
This air vent can be retro fitted into model 997 bumpers giving the GT3 look.

Fits:
Porsche 997 2005>>
Porsche 987 Boxster 2005>>
Porsche 987 Cayman 2005>>

The front of a GT3 has a look and feel that sets it far apart from any other automobile in its class. The sought after upper air vent screams speed and aggression, but unfortunately it’s only available on a true GT3. Installing one of these vents on a non GT3 bumper can be very problematic, one slip of the saw and your bumper cover is unusable. Rennline's GT3 vent installation kit turns a daunting task into a very simple one. No more tracing, cutting, praying, grinding, and gluing. Just attach the fixture, cut the profile, and mount the OEM vent with the supplied brackets and hardware. It’s truly that simple.

Note: All of these components are designed to work with factory bumpers and vents.
Note: Pictures may not show actual product and does not include the installation kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9975753279301CKIT

The product you are viewing cross references to these numbers

Lightweight aluminium flywheel with performance clutch kit and sprung centre plate

Sprung centre plate gives a more compliant drivetrain feel over the rigid centre plate version

Contains Aasco flywheel and Sachs Performance clutch kit. 

Fits:
Porsche 996 Carrera / Carrera 4 3.4ltr - 1997 to 2001 (non turbo)
Porsche 997.1 Carrera / 4  3.6ltr - 2005 to 2008 (non Turbo)

- AASCO Flywheel with bolts
- Sachs Performance pressure plate
- Sachs Performance drive plate (sprung) 
- Sachs bearing
- Clutch bolts

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POWERCLUTCH4

The product you are viewing cross references to these numbers

Lightweight aluminium flywheel with performance clutch kit and sprung centre plate

Sprung centre plate gives a more compliant drivetrain feel over the rigid centre plate version

Contains Aasco flywheel and Sachs Performance clutch kit. 

Fits:
Porsche 996 Carrera / Carrera 4 3.6L - 2002 to 2004 (non turbo)
Porsche 997 Carrera  / 4  3.6L - 2005-09 (non Turbo)

- AASCO Flywheel with bolts
- Sachs Performance pressure plate
- Sachs Performance drive plate (sprung) 
- Sachs bearing
- Clutch bolts

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POWERCLUTCH3

The product you are viewing cross references to these numbers

Rear brake disc Ø: 356 mm and brake pads package Porsche Macan Turbo

Porsche Macan 3.6L TURBO 400BHP (REAR)
Porsche Macan 3.6L TURBO 440BHP (REAR)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT95BT.R356.OE

The product you are viewing cross references to these numbers

FRONT Brakes package Porsche 95B Macan 3.0L GTS / Turbo 400Bhp

Porsche Macan 3.0L GTS (FRONT)
Porsche Macan 3.6L TURBO 400 bhp (FRONT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT95BT.F360.OE

The product you are viewing cross references to these numbers

Bush kit suspension rebuild. 

Front and Rear axles

Fits:
Porsche 911 turbo 3.0ltr - 1975 to 1976

Suspension bush rebuild kit using standard shore rating (not uprated)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPBUSHKIT

The product you are viewing cross references to these numbers

Bush kit suspension rebuild. 

Front and Rear axles

Fits:
Porsche 911 turbo - 1989 - G50 gearbox

Suspension bush rebuild kit using standard shore rating (not uprated)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPBUSHKIT

The product you are viewing cross references to these numbers

Engine bay trim kit Cayman GT4 RS. 



Fits:
Porsche 718 Cayman - 2017 onwards

Upgrade the standard 718 Cayman engine bay trims to these black items from the 718 GT4 RS

Kit Includes

Engine bay trim - black x 1
Engine bay water cap - black x 1
Engine bay oil cap - black x 1

Click 'Zoom in' for large parts diagram.
Diagram ref no 19 and 21

RS flared side sill skirt kit. 
Includes left and right skirt



Fits:
Porsche 991 turbo / turbo S - 2014 to 2019
Porsche 991 GT3 RS - 2015 to 2017

This direct replacement for the standard sill trims adds a more aggressive look. Compared to the standard turbo skirts, it features an approximate three-inch flare.
The set includes both left and right sills.

Handbrake shoes and spring kit. Porsche 911 1970-89. Rusty hand brake shoes spring will stop the hand brake shoes from engaging or releasing, if they don't release they can over heat and cause major problems.

Fits:
Porsche 911 1970-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKITHB911.1

The product you are viewing cross references to these numbers

Tiptronic / automatic gearbox filter & gasket kit. 

Fits:
Porsche 996 3.6ltr - 2001 to 2005
Porsche 996 turbo - 2001 to 2005
Porsche 997.1 3.6ltr - 2005 to 2008
Porsche 997 3.8ltr - 2007 to 2008

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TIPFILTERKIT1

The product you are viewing cross references to these numbers