Kits

REAR Brake Pads and Brake Disc Package Porsche 997 Carrera 2S

  


Porsche 997 Carrera 2S 3.8L (REAR)

This package includes Original Equipment Quality (OEQ) parts

Standard Replacement

For more information about OEQ Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT997C2S.R.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads & Slotted Brake Disc Package. Porsche 996 1997-04

With Brembo brake pads

Porsche 996 C2 1997-04 (REAR)
Porsche 996 C4 1997-04 (REAR)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996.R.SEBS

The product you are viewing cross references to these numbers

FRONT Brake Pads and Slotted Brake Disc Package for Porsche 996 1997-04 

With Brembo brake pads

Porsche 996 C2 1997-04 (FRONT)
Porsche 996 C4 1997-04 (FRONT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996.F.SEBS

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package for Porsche 996C4S / 996 Turbo

  


Porsche 996 C4S
Porsche 996 Turbo 2000>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996TT.R.SHW

The product you are viewing cross references to these numbers

FRONT Brake Pads and Brake Disc Package for Porsche 996C4S / 996 Turbo




Porsche 996 C4S
Porsche 996 Turbo 2000>>


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996TT.F.SHW

The product you are viewing cross references to these numbers

REAR Brake Pads and Slotted Brake Disc Package. Porsche 996 C4S / 996 Turbo
with Brembo brake pads 


Porsche 996 C4S (REAR)
Porsche 996 Turbo 2000>> (REAR)



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996TT.R.SEBS

The product you are viewing cross references to these numbers

FRONT Brake Pads and Slotted Brake Disc Package. Porsche 996 C4S / 996 Turbo
with Brembo brake pads

Porsche 996 C4S (FRONT)
Porsche 996 Turbo 2000>> (FRONT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996TT.F.SEBS

The product you are viewing cross references to these numbers

Front lower control arm (wishbone / A-frame) set.
Refresh both sides of your Porsche’s front suspension with this front control arm set - including both left 91134190100 & right 91134190200 wishbone. Designed for 911/912/914 models (1969-73), these direct-fit arms (or bushings) restore factory geometry, steering accuracy and dynamic driving feel.
SET OF 2, left and right side.

Fits:
Porsche 911 1969 - 1973
Porsche 914-6 1970 - 1976

Diagram ref no 12.

Position: Front axle, lower control arm (A-frame) that connects the upright or suspension hub to the chassis.

This wishbone is a critical structural suspension component that maintains correct front wheel alignment, controls camber and caster under load, and anchors the suspension geometry to the chassis. It absorbs lateral, torsional and vertical loads, ensuring your vehicle handles with precision.

Front control arms can suffer from fatigue, corrosion, wear at the mounting bushings, or damage from impact or road debris. When compromised, you may notice uneven tyre wear, loose steering feel, vibration or mis-alignment. A new arm restores correct geometry, return-to-centre feel, and stable road handling.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134190X00

The product you are viewing cross references to these numbers

Stabilizer bar bush set, Front, Size: 20mm.
This rubber‐bush is designed to replace the original 20 mm front anti-roll bar bushes used in the front suspension of classic Porsche 911/930 models (front axle). It fits both the inner and outer mounting points of the stabiliser bar and is suitable for left and right sides.
SET OF 4 bushes

Fits:
Porsche 911 1974 - 1986 Front axle
Porsche 911 Turbo (930) 1975 - 1986 Front axle

Diagram ref no 24.

These bushes cushion the 20 mm diameter front anti-roll (sway) bar mountings, reducing metal-on-metal contact, dampening vibration and noise, and maintaining proper bar alignment under dynamic load. With worn or hardened bushes, the bar can move excessively, causing increased body roll, clunks or changes in handling.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91134379203

The product you are viewing cross references to these numbers

FRONT Shock Absorbers inc top mounts & fittings. Porsche 996 C4/C4S/TT 1997-05

Complete Strut Assembly Kit for Porsche 996 911 (Carrera 4 / 4S / Turbo)

Restore the precise ride quality and confident handling your 996 911 was built for. Over time, struts wear gradually under normal driving conditions, making changes in handling hard to notice until performance declines. This complete strut assembly kit includes nearly everything you need to replace your worn components and bring your suspension back to life.

Each kit includes:

• Front struts
• Strut mounts and bearings
• Bump stops
• Required hardware

With new struts installed, you’ll experience sharper handling, smoother ride quality, reduced braking distances, and more even tire wear.

Note: There are two available spring seat isolator sizes — 3.0mm (99634352500) and 6.5mm (99634352501) — sold separately. Please measure your existing isolator to ensure the correct size for your vehicle.

Additional information:

Coil springs are not included and can be purchased separately if needed.

Original washers and spacers can typically be reused, provided they show no signs of physical damage upon inspection.

Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
Cars with and without sport suspension.

Restore your C4 four wheel drive ride comfort and handling with a complete Suspension Strut Assembly Kit. This kit includes replacement struts (shock absorbers) and essential mounting components designed to bring your suspension system back to factory performance.

Struts are critical to controlling your vehicle’s stability by absorbing bumps and managing the rebounding motion of the springs. When they wear out, ride quality and handling can decline gradually over time.

Common Signs of Worn or Failing Struts

• Bouncy ride: The vehicle continues to bounce after hitting a bump.
• Nose dive when braking: The front end dips noticeably under braking.
• Excessive body roll: The car leans or feels unstable when cornering.
• Uneven tire wear: Tires show irregular wear patterns such as cupping or scalloping.
• Fluid leaks: Visible oil or fluid seeping from the strut body.

Replacing your struts restores proper suspension damping, improves ride comfort, enhances stability, and helps extend tyres life.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634304339

The product you are viewing cross references to these numbers

Bilstein B4 FRONT Shock Absorbers inc top mounts & fittings. Porsche 996 C4/C4S/TT 1997-05

Complete Strut Assembly Kit for Porsche 996 911 (Carrera 4 / 4S / Turbo)

Restore the precise ride quality and confident handling your 996 911 was built for. Over time, struts wear gradually under normal driving conditions, making changes in handling hard to notice until performance declines. This complete strut assembly kit includes nearly everything you need to replace your worn components and bring your suspension back to life.

Each kit includes:

• Front struts
• Strut mounts and bearings
• Bump stops
• Required hardware

With new struts installed, you’ll experience sharper handling, smoother ride quality, reduced braking distances, and more even tire wear.

Note: There are two available spring seat isolator sizes — 3.0mm (99634352500) and 6.5mm (99634352501) — sold separately. Please measure your existing isolator to ensure the correct size for your vehicle.

Additional information:

Coil springs are not included and can be purchased separately if needed.

Original washers and spacers can typically be reused, provided they show no signs of physical damage upon inspection.

Fits:
Porsche 996 3.4L Carrera 4
Porsche 996 3.6L Carrera 4
Porsche 996 3.6L Carrera 4S
Porsche 996 3.6L Turbo
Porsche 996 3.6L Turbo S
Cars with and without sport suspension.

B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22-113344KIT

The product you are viewing cross references to these numbers

Front fog lamp set,
This fog lamp set is engineered to replicate the original Porsche front bumper fog lights in every detail. Each unit matches the factory housing, lens design, mounting points, and light output, ensuring perfect alignment, reliable performance, and a seamless OEM appearance on your Porsche.
SET OF 2, for left and right side.

Fits:
Porsche 955 Cayenne 2005 - 2006 (cars with Aerokit package)
Porsche 958 Cayenne 2011 - 2017
Porsche 95B.1 Macan 2014 - 2018

The fog lamp assembly provides additional forward lighting under low-visibility conditions, projecting a wide, low beam pattern to illuminate the road ahead in fog, rain or snow. It complements the main headlamps by reducing glare and improving driver visibility in adverse weather.

Over time, fog lamps can deteriorate due to exposure to road debris, moisture, and heat. Lenses may turn cloudy, seals can fail, and reflectors lose brightness - all of which reduce visibility and compromise safety.

Replace your fog lamp when:
• The lens is cracked, yellowed, or foggy.
• Moisture or condensation forms inside the housing.
• The beam pattern appears dim or uneven.
• The lamp assembly is damaged from an impact or corrosion.
• You’re restoring your Porsche and want a clean, factory-fresh look.

Installing a high-quality fog lamp restores clear illumination, correct beam focus, and the original visual appeal of your Porsche’s front end.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95563116300

The product you are viewing cross references to these numbers

Rear Shock absorber ring.  SET OF 2
These precision moulded rings sit between the rear shock absorber and its mounting point, ensuring a snug, vibration free fit. Over time, the original rubber rings can compress, harden or split, leading to unwanted movement or clunking noises from the suspension. Manufactured to OEM dimensions using high grade elastomer, this pair provides a simple, cost effective solution to maintain proper suspension alignment and comfort.

Fits:
Porsche 993 C2 / C4 / C2 / C4 1994-98
Porsche 993 Turbo

Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733350400

The product you are viewing cross references to these numbers

Shock Absorber Rear. Porsche 996 C2/C4   SET OF 2 



Fits: Standard Chassis - (WITHOUT M030 Sports Suspension.)

Fits Left & Right side

• Porsche 996 3.4L Carrera
• Porsche 996 3.6L Carrera
• Porsche 996 3.6L Carrera S
• Porsche 996 3.4L Carrera 4,
• Porsche 996 3.6 Carrera 4,
• Porsche 996 3.6 Turbo,
• Porsche 996 3.6 Turbo S

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99633305185

The product you are viewing cross references to these numbers

Supporting rear suspension top mounts, SET OF 2
Refresh rear end precision and ride comfort with this OE Match pair of rear suspension top mounts for Porsche 996. These mounts use premium rubber and a high-quality bearing interface to control strut movement, cut noise/harshness, and maintain correct geometry under load. Ideal when replacing rear dampers or chasing knocks, creaks, tramlining or uneven tyre wear. Supplied as a matched left/right pair for consistent handling.

Fits:
Porsche 996 C2 / C4 / C4S 1998 - 2005
Porsche 996 Turbo / GT2 2001 - 2005
Porsche 996 GT3 MKI

Diagram ref no 2

Manufactured using high-quality forged aluminium and fitted with durable rubber bushes and ball joints, they ensure excellent suspension response, ride comfort, and long-term reliability. Ideal for eliminating unwanted steering vibration, uneven tyre wear, or suspension noise.

• Position on Vehicle: Rear suspension – both upper shock absorber/strut mount positions.
• Cross-Reference / Alternative Numbers: 2 × 996 333 059 03 (each mounted left & right)
• Applications: Ideal for full rear suspension overhaul where both mounts are being replaced for uniform performance.

Replacing both sides together avoids mismatched performance, where one side’s mount is new and the other is still worn — leading to inconsistent handling, uneven ride feel and asymmetric noise. A full set ensures true rear-suspension balance, restored comfort and dependable stability.

When to replace both:
• One side already shows wear – replace both to maintain symmetry.
• Rear shock/strut replacement performed on both sides – pair with mounts for full service.
• High-mileage vehicle where both mounts are likely nearing end-of-life.
• You want consistent ride and handling across both rear corners.
• To avoid replacing the second side shortly after the first, saving downtime and labour.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99633305903

The product you are viewing cross references to these numbers

REAR shock absorber top mounts fitting kit.

Restore the precise ride quality and confident handling your Porsche 996 911 Carrera was built to deliver. Over time, shocks gradually wear down, making changes in handling and comfort hard to notice until performance begins to fade. This complete  shock absorber top mounts fitting kit  nearly everything you need to replace your worn components—shock mounts, bump stops, dust boots, and all necessary hardware. 

Fits:
Porsche 996 3.4L Carrera
Porsche 996 3.6L Carrera
Porsche 996 3.6L Carrera S
Porsche 996 3.4L Carrera 4,
Porsche 996 3.6 Carrera 4,
Porsche 996 3.6 Turbo,
Porsche 996 3.6 Turbo S

With fresh shocks installed, you can expect:

Sharper, more responsive handling Improved ride comfort and stability Reduced braking distances More even tire wear

Note: Coil springs are not included and can be purchased separately if needed. The original washers and spacers can typically be reused unless they show signs of damage upon inspection.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99633305903

The product you are viewing cross references to these numbers