Kits

Snap a timing belt on this type of motor and the valves stop opening and closing, but those pistons keep slamming up and down. Bent valves, broken lifters, even a broken camshaft could be the outcome! Keep the relationship between your pistons and valves civil by performing proper timing and balance shaft belt maintenance.

This kit includes:
- Camshaft Belt
- Balance shaft belt
- Camshaft tensioner roller
- Timing belt tensioner roller
- Balance shaft idler roller
- Camshaft idler roller

Fits:
Porsche 924/944 2.5L
Porsche 944 TURBO 2.5 >1986
WITHOUT AUTO ADJUSTER

Early cars (83-86) that have been updated to the later style waterpump with belt guard rail will not use this kit, please order parts individualy.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BELTKIT01

The product you are viewing cross references to these numbers

Camshaft Cover Gasket Set:
6 x Top cam cover gaskets
2 x Bottom cam cover gaskets
38 x cam cover bolts

Fits:
Porsche 993 1994-98

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

GASKETKIT03

The product you are viewing cross references to these numbers

Dilavar head stud set.
This complete set of 24 Dilavar cylinder head studs replaces all major head fasteners on air-cooled Porsche flat-six engines. Ideal for full rebuilds, upgrades, or resolving broken stud issues, the set provides factory-spec strength, corrosion resistance, and thermal stability. Fits 911, 964, and 993 engines (1965–98).
SET OF 24 STUDS (Original Porsche Quality)

Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994
Porsche 993 1994 - 1998

Diagram Ref No 2.

Aged factory head studs can crack, corrode, or lose tension - especially after decades of heat cycling. Failure of a head stud can cause head leaks, combustion pressure loss, broken cylinders, or catastrophic engine damage. Installing new Dilavar studs ensures proper sealing, correct torque values, and long-term engine reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99310117054

The product you are viewing cross references to these numbers

Update your early 911 1968-83 and 930. Includes two cam timing chain housing covers, two oil lines, two tensioner and other necessary fittings.



Fits:
Porsche 911 2.7L / 3.0L
Porsche 930 3.0L / 3.3L Turbo

Important Note: For early models with engines smaller than 2.7L (such as 2.2L or 2.4L), an additional pipe (Part No. 930107348XX) will be required. Furthermore, for pre-1980 models, a spacer may be necessary between the chain tensioner arm and the tensioner itself. Two spacers are needed—one for each side. You’ll have the option to include these items when adding this kit to your basket.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93010591199

The product you are viewing cross references to these numbers

Engine oil sump plate made from high-quality alloy. Includes sump plug, seal ring and all required fitting kit.

Motorsport Oil Sump Plate Kit has been designed to dissipate heat at a faster pace for performance-oriented driving or track events. The plate incorporates deep cooling fins that channel the air and maximize surface area for more efficient oil cooling. 

Fits:
Porsche 911 1965-83

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUMPKIT911

The product you are viewing cross references to these numbers

Helping hand with the most popular parts you will always need when rebuilding the engine top end.

Fits:
Porsche 911 3.2L 1984-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

ENGINEKIT03

The product you are viewing cross references to these numbers

Helping hand with the most popular parts you will always need when rebuilding the engine top end.

Fits:
Porsche 911 3.0L 1979-80

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

ENGINEKIT02

The product you are viewing cross references to these numbers

Upgrade your Porsche 993 with our new C4S spoiler grills. These grills will need to be colour coded to the colour of the car.



Fits:
Porsche 993 1994-97

Brand:
Genuine Porsche Parts (3 part kit + clamping washers)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT09

The product you are viewing cross references to these numbers

Turbo rear lower valance should be used when fitting with bigger outlet tail pipes to Cayenne V6 and S.



Fits:
Porsche Cayenne 955 V6, S
Porsche Cayenne 955 Turbo

Product Type:
Original Porsche

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT12

The product you are viewing cross references to these numbers

Convert your Cayenne V6 or S to Turbo look with our front end bumper and lower valance set.
All parts are Original Porsche.

Kit includes:
- Turbo front bumper
- Turbo lower front valance
- Four bumper grills
- Fixing caps
- Headlamp washer jets covers

Please Note:
All Cayenne Turbo front bumpers have the provision parking sensors and headlamp washer jets, we will provide a blanking plate for the washer jet holes, if you car is fitted with parking sensors you will need to move them over to the Turbo bumper

For more information about fitting conversions Click Here

Fits:
Porsche Cayenne 955 V6 / S
Porsche Cayenne Turbo / Turbo S

Material:
Polyuathane PU

Product Type:
Original Porsche

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT16

The product you are viewing cross references to these numbers

Original Porsche 997 GT2 rear bumper kit.
This GT2 Rear bumper kit fits all standard 997 Turbo

Part included:
1 x rear bumper,
2 x rear bumper air duct,
2 x 997 GT2 tail pipes.

Please specify if your vehicle has parking sensors or not when ordering. Some modifications will need to made to the exhaust tail pipes.

Fits:
Porsche 997 Turbo

Material:
Polyuathane PU

Product Type:
Original Porsche

Design Facelift Package to 997 MKII.
Original Porsche 997 2009 Front bumper conversion, also includes grills and lights. For cars with centre radiators.

Kit includes:
- Front Bumper
- Front Bumper Lower Spoiler
- Centre frame
- Left & Right frames
- Left & Right LED Indicator/ Side lamps
- Front Number Plate Holder
- Headlamp Washer Jets

Fits:
When facelift the front end to the new LED lamps you do not need a lamp control unit just need a good auto electrician  to wire up the lamps.

For more information about fitting conversions Click Here

Product Type:
Original Porsche

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT06

The product you are viewing cross references to these numbers

Original Porsche 997 GT2 front bumper kit. This GT2 front bumper kit fits all standard 997 & 997 S models.

Parts included:
1 x front bumper,
1 x centre top air duct,
1 x lower lip spoiler,
3 x inner air duct vents for the bumper,

Please specify if your vehicle has headlamp washer jets or not when ordering. Some modifications will need to made to the indicator and drive lamps wiring.

Fits:
Porsche C2/4 997 *
Porsche C2/4 997S *
*Standard 997 Models will require 997 front indicators we offer DRL's Smoked 99763109089 or Clear 99763109088

Fits:
Porsche 997 Turbo

Material:
Polyuathane PU

Product Type:
Original Porsche

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BODYKIT07

The product you are viewing cross references to these numbers

Original Porsche 997 Turbo MK1 Front bumper and lower front spoiler, also includes grilles and lights

Kit includes:
- Front Bumper
- Front lower spoiler
- Centre frame
- left & right frames,
- left & right DRL Indicator / side lamps,
- left & right Fog lamps

Fits: Porsche Standard 997 or 997S with modification to lights wiring

*Requires specialist painting & fitting.
For more information about fitting Click Here

Material:
Polyuathane PU

Product Type:
Original Porsche

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT04

The product you are viewing cross references to these numbers

Original Porsche 996 Turbo / C4S front bumper for facelift 996.

Direct fitment to 996TT/ 996 C4S / 996 2002 onwards.

Package Includes
1 x Front bumper
1 x Lower lip spoiler
3 x Front bumper Grills

Fits:
Porsche 996 08/2001>>*
Porsche 996 C4S
Porsche 996 Turbo

Material:
Polyuathane PU

Product Type:
Original Porsche

Note:
For 996 1998-2001 or Boxster 986 the front wings and headlamps will need to be updated to the 08/2001 model type.
*You may also need radiator air ducts from a 996TT and some cars will require a centre radiator blanking plate if the car does not have a factory centre radiator.


For more information about fitting conversions Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT03

The product you are viewing cross references to these numbers

Original Porsche 996 GT2 Front bumper package with:

Parts included:
1 x BUMPER FRONT 996 GT2 02>> "OE"
1 x 996 GT2 FRONT GRILL MIDDLE
1 x 996 GT2 FRONT GRILL - L
1 x 996 GT2 FRONT GRILL - R
1 x BUMPER FRONT 996 GT2 02>> LOWER SPOILER "OE"
1 x BUMPER FRONT 996 GT2 INNER BUMPER AIRDUCT (CENTRE)
1 x 996 GT2 INNER BUMPER AIRDUCT (centre) 02>>
1 x 996 GT2 FRONT LIGHT COVER- L
1 x 996 GT2 FRONT LIGHT COVER R
1 x TOW EYE COVER 964/993/986 on front bumper

Fits:
Porsche Standard 996 2002>> or 996 Turbo

For more information about fitting conversions Click Here

Material:
Polyuathane PU

Product Type:
Original Porsche

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT02

The product you are viewing cross references to these numbers