Kits

Knock sensor. Porsche 964 OE Number 96460614100

Fits:
Porsche 964 1989-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96460614100KIT

The product you are viewing cross references to these numbers

You can now turn your 911 into the classic RSR WIDEBODY Look.

The kit includes the RSR widebody look Front bumper, Rear bumper / Rear duct tail engine lid.

The panels are made in the Germany and are high quality.

Fits:
Porsche 911 1966-73
Porsche 911 1974-89

Material:
Made from Fibre Glass GRP

Product Type:
Replica

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91150510020KIT

The product you are viewing cross references to these numbers

Crank Case Jointing Bolts Kit.

Kit Includes
11 x Crank case Long screw studs
2 x Crank case Short screw studs
13 x Crank case screw Washers
13 x Crank case screw O-rings
11 x Crank case screw Nuts

Fits:
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 996 Turbo

Click 'Zoom in' for large parts diagram.
Diagram Ref No 26, 27, 28, 29, 46.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

ENGINEKIT06

The product you are viewing cross references to these numbers

Under drive crankshaft pulley (with A/C) kit. Includes pulley, drive belt and new bolt. Pulley is made from 6061-T6 aluminum, Improve horsepower and torque while reducing parasitic drag from the alternator, power steering pump and water pump.

Pulley outer diameter: 123mm (measured from ribs to ribs)

FITMENT GUIDE:
Porsche 986 Boxster:
1997-1999 2.5L H6
2000-2004 2.7L H6
2000-2004 S 3.2L H6
986 Spec Boxster Legal

Porsche 987 Boxster / Cayman
2005- 2.7L H6
2005-2006 3.2L H6
2007- 3.4L H6

Porsche 996 / 997
1999 3.4L H6 NA
2001-2004 3.6L H6 NA
2005- 3.6L H6 NA

Will not work on 3.8L (S) or Turbo models

For INSTALLATION GUIDE CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3609001601-AC

The product you are viewing cross references to these numbers

Exhaust Catalysts Fitting Kit. Porsche (911) 996 C2 /C4 / C4S

Fits:
Porsche 996 Carrera 3.4L
Porsche 996 Carrera 3.6L

Kit Includes:
2 x 99611122002 EXHAUST to CAT CLAMP
2 x 99611111350 EXHAUST MANIFOLD to CAT GASKET
2 x 99906402601 SCREW PLUG
2 x N0138322 SEAL RING
6 x 90007428702 BOLT HEX-HD M8X35
6 x 99908405202 EXH NUT for HEAT EXCHANGER M8
2 x 90008308000 BOLT HEX-HD
2 x 90012305020 SEALING RING

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FITTINGKIT16

The product you are viewing cross references to these numbers

Exhaust Mufflers & Centre Pipe system with Valves.

DesignTek® exhausts are built for the sound and performance to enhance your Porsche 991S. This kit includes rear centre box with valves, side muffler boxes and chrime plated finish tail pipes

High-Performance Rear Exhaust with sound switch:
● Push the sound-button between:
Switch closed: Deep Sports Sound
Switch opened: Perfect Racing Sports Sound

Fits:
Fits:
Porsche 991 Carrera
Porsche 991 Carrera S
NOTE: * Compatible with the factory catalytic converter

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36060099S2

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

Race Exhaust Muffler system with Bypass X-Pipe with Opening & Closing Valves.

DesignTek® exhausts are built for the sound and performance to enhance your Porsche 991S. This kit includes rear x-pipe with valves, side bypass pipes and carbon fibre finish tail pipes

High-Performance Rear Exhaust with sound switch:
● Push the sound-button between:
Switch closed: Deep Sports Sound
Switch opened: Perfect Racing Sports Sound

Fits:
Porsche 991 Carrera
Porsche 991 Carrera S
NOTE: * Compatible with the factory catalytic converter

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

36060099S1

The product you are viewing cross references to these numbers

Indicator Lamps and Lens Front Kit with CHROME Rim Lens Porsche 911



Kit Includes METAL Light Housings
1 x Front indicator lamp Unit Right
1 x Front indicator lamp Unit Left
1 x Front indicator lamp Lens Right
1 x Front indicator lamp Lens Left
1 x Front indicator lamp Seal Right
1 x Front indicator lamp Seal Left

Fits:
Porsche 911 1969-73 LWB Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

LIGHTKIT57

The product you are viewing cross references to these numbers

Indicator Lamps and Lens Front Kit with BLACK Rim Lens Porsche 911

Kit Includes METAL Light Housings
1 x Front indicator lamp Unit Right
1 x Front indicator lamp Unit Left
1 x Front indicator lamp Lens Right
1 x Front indicator lamp Lens Left
1 x Front indicator lamp Seal Right
1 x Front indicator lamp Seal Left

Fits:
Porsche 911 1969-73 LWB Cars

Design and made in METAL casing complete with wiring. Please this version does not have a hole for a side light bulb in the first compartment this will need to be modified if you require a side light (OE Ref: PCG63193520 / PCG63193620)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

LIGHTKIT56

The product you are viewing cross references to these numbers

Restoration Seals Kit.
Porsche 964 Coupe Standard Body 1989-94

Package includes:
1 x 964 FRONT BUMPER RUBBER SMILE
1 x 964 REAR BUMPER TO BODY SEAL -LEFT
1 x 964 REAR BUMPER TO BODY SEAL -RIGHT
1 x 964 SIDE SILL SEAL LONG L
1 x 964 SIDE SILL SEAL LONG R
1 x 964 SHARK FIN SEAL SHORT L
1 x 964 SHARK FIN SEAL SHORT R
2 x SCUTTLE PANEL RUBBER 911 6.5mm
1 x BONNET SEAL 964 1990-94 *OEM
1 x DOOR W/SCRAPER COUPE OUTER - L 911 70-94 *OEM
1 x DOOR W/SCRAPER COUPE OUTER - R 911 70-94
2 x 911 FRONT 1/4 GLASS BOTTOM SEAL L or R (outer)
1 x 911 DOOR GLASS SCRAPER INNER (clip on) L 65-94
1 x 911 DOOR GLASS SCRAPER INNER (clip on) R 65-94
2 x DOOR W/SCRAPER INNER L/R 911 70-94 (SLOTTED)
1 x INNER DOOR FELT SEAL - L COUPE 911/964 1986>>
1 x INNER DOOR FELT SEAL - R COUPE 911/964 1986>>
2 x DOOR SEAL COUPE L or R 911/964 66-94 "OEM BRAND"
2 x DOOR HANDLE SEAL LARGE 911 65-94
2 x DOOR HANDLE SEAL SMALL 911 65-94
2 x DOOR FELT CHANNEL 911 65-93 L or R
1 x SCREEN SEAL FRONT 964 1987-94 "OEM BRAND"
1 x REAR SCREEN SEAL COUPE 964 "OEM BRAND"
1 x 911 FRONT 1/4 LIGHT SEAL - L 1976-94
1 x 911 FRONT 1/4 LIGHT SEAL - R 1976-94
1 x 964 REAR 1/4 GLASS SEAL L 89>
1 x 964 REAR 1/4 GLASS SEAL R 89>
2 x WINDOW LIFT RAIL SEAL 911 1970-89 ALL / 964 ALL / 993 COUPE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SEALKIT9642

The product you are viewing cross references to these numbers

REAR Brake Pads and Brake Disc Package. Porsche 996 GT3 2003>>




Porsche 996 GT3 (REAR)


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

BRAKEKIT996GT3.R.BRE

The product you are viewing cross references to these numbers

Fiber Glass 996 GT2 front bumper package with:

Parts included:
1 x BUMPER FRONT 996 GT2 02>> "GRP"
1 x 996 GT2 FRONT GRILL MIDDLE
1 x 996 GT2 FRONT GRILL - L
1 x 996 GT2 FRONT GRILL - R
1 x BUMPER FRONT 996 GT2 02>> LOWER SPOILER "OE"
1 x BUMPER FRONT 996 GT2 INNER BUMPER AIRDUCT (CENTRE)
1 x 996 GT2 INNER BUMPER AIRDUCT (centre) 02>>
1 x 996 GT2 FRONT LIGHT COVER- L
1 x 996 GT2 FRONT LIGHT COVER R
1 x TOW EYE COVER 964/993/986 on front bumper

Fits:
Porsche Standard 996 2002>> or 996 Turbo

For more information about fitting conversions Click Here

Material:
Firbe Glass

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SPOILERKIT02E

The product you are viewing cross references to these numbers

Camshaft cover gasket set for Porsche 944S2



OEM cam cover gasket set to fit all models of 944S (2.5L 16V) & 944S2 (3.0L 16V).
Kit includes gaskets and seals for the following
1 x Cam cover (OE ref 92810444709)
4 x Spark plug wells (OE ref 92810444308)
13x Cover bolt seals (OE ref 92810411502)

If the cam cover or the top of the engine on your 944S or 944S2 is wet with oil, this is the seal kit that you need to replace.

Fits:
Porsche 944 S2 3.0L 1989-91

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

GASKETKIT05

The product you are viewing cross references to these numbers

Rear Toe, Camber, and Kinematic Control Arms.


Kit Includes :
(4) Upper Control Arms, (2) Toe Control Arms

Fits:
Porsche 993

If you're serious about how your 993, 996, 997, Cayman, or Boxster handles, you should upgrade the rear suspension with adjustable control arm links. There are two major drawbacks to the factory links:
1) You can't lower your car and maintain proper suspension geometry. The factory links create too much toe-in, which cannot be adjusted out, creating handling problems and excessive tire wear.
2) The factory links have rubber bushings, which make handling imprecise, especially in performance driving when suspension loads are highest.

Rennline adjustable control arm links solve both these problems. Manufactured from 6061 aluminum and feature a turnbuckle design that allows each arm to be lengthened or shortened as needed to restore proper suspension geometry on a lowered Porsche. The FK Teflon-lined rod end bearings ensure precision handling and lock in your car's alignment settings, ensuring predictable cornering under all conditions. Rennline arms come with all required bolts and machined bushings to get the job done. Rubber Boots not included but available separately.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S7273741012415

The product you are viewing cross references to these numbers

Monoball Sealed 2 X front suspension top mounts & 2 X rear trailing arm mounts



SET OF 4

Fits:
Porsche 911/912/930 All 1966-89 Front and Rear

Looking for the ultimate in strut mounts? Rennline Front and Rear Monoball Kit combines both our front strut top monoball and rear trailing arm monoball bushings into a single package to give you a simple solution to massivly improve the handling of your 911. This kit combines our part numbers MB11 and MB12 which includes front strut tops and rear trailing arm monoball mounts. CNC machined and assembeled in house right here in the USA all monoballs feature the highest quality teflon lined motorsports spherical bearings, and precision machined housings. Proven on the street and the track, these will ensure optimal suspension geometry through the suspension's entire range of motion. Includes 2x front and 2x rear trailing arm monoball mounts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

MB11KIT

The product you are viewing cross references to these numbers

KW Rear Top Mount Kit for suspension kit 35271022
Porsche 964 C4 >>11/1990

You can mount the suspension kit 35271022 to the early 964 model upto >>11/1990 but you will need to change the rear top mounts and spring seat.

This kit contains the parts

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT22

The product you are viewing cross references to these numbers