H&R

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.



Lowers car by: FRONT 30mm
Single spring supplied.
Please order a quantity of 2 for the front axle.

Fits:
Porsche 968 1992-95

Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

29875VA

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.



For cars with air suspension (ETS)

Fits:
Lowers car by: 30mm
Porsche 9YA Cayenne 2018>>
Only for cars with air-suspension (ETS)

Lowers car by: 40mm
Porsche 971 Panamera 2017>>
Only for cars with air-suspension (ETS)

NOTE: Please state chassis-number by ordering.

Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28952-2

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.



Lowers car by: FRONT 35mm / REAR30 mm

Fits:
Porsche 9YA Cayenne / Cayenne S 2017>>
For cars incl. PASM, without air suspension


Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28690-1

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.



Lowers car by: 20mm

Fits:
Porsche 987 Boxster Spyder 2009>>


Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28905-1

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.
Please note:
Vehicles fitted with load dependent brake control require separate approval despite of ABE (In countries where approval or the like is required). In any case set brake control to required level after lowering!



Lowers car by: 30mm

Fits:
Porsche 993 C2 / C2S 10/1993-1998
Porsche 993 C4 / C4S 10/1993-1998


Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

60953-1

The product you are viewing cross references to these numbers

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.

Fits:
Porsche 997 GT3 / GT3 RS 03/2006>>>

Lowers car by: FT 10-30mm / RR 10-30mm

HA: incl. damping force adjustment,
RA: aluminum shocks with support bearings

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

32997-1

The product you are viewing cross references to these numbers

H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.



Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable) requires bushes 99134379208
- Rear - 24mm (adjustable in 2 places)

Fits:
Porsche 981 Boxster / Boxster S 05/2012>>
Porsche 981 Cayman / Cayman S 05/2012>>

Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33879-1

The product you are viewing cross references to these numbers

H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.



Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable)
- Rear - 26mm (adjustable in 2 places)

Fits:
Porsche 991 Carrera 2 / Carrera 2S 2012>
Typ 991, 2WD, incl. Convertible

Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33880-1

The product you are viewing cross references to these numbers

H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.



Front & Rear Anti Roll Bar:
- Front - 26mm (adjustable in 3 places)
- Rear - 24mm (adjustable in 4 places)

Please note: if bushes are not included with the kit this means you have to reuse your existing ones.

Fits:
Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2005>> Manual & Tiptonic

Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2008>>Facelift Mod.
ONLY PDK gearbox,

Porsche 997 Turbo 11/2005>>
ONLY PDK gearbox
without TÜV approval


Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33239-5

The product you are viewing cross references to these numbers

H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.



Front & Rear Anti Roll Bar:
- Front - 24mm (not adjustable)
- Rear - 24mm (adjustable in 4 places)

Please note: if bushes are not included with the kit this means you have to reuse your existing ones.

Fits:
Porsche 997 Carrera 2 / Carrera 2S 08/2004>>
Porsche 997 Carrera 2 / Carrera 2S Gen 2 but ONLY for PDK gearbox

Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33239-4

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.



For cars with air suspension (ETS)

Lowers car by: 35mm

Fits:
Porsche Macan Typ 95B 2014>>
Only for cars with air-suspension (ETS)

NOTE: Please state chassis-number by ordering.

Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28804-1

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.



Lowers car by: 40mm

Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only without PASM, only for cars with steel suspension

Porsche Macan / Macan S / Macan Turbo 2019>>
only without PASM


Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28788-2

The product you are viewing cross references to these numbers