H&R

Set of Four VTF Adjustable Lowering Springs.
Not for cars with PDDC (Porsche Dynamic Chassis Control)



Fits
Porsche 991 Carrera 2
Porsche 991 Carrera 2S
Coupe, Cabriolet and Targa models

Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)

Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm

These are the perfect answer for cars equipped with electronic shock absorbers.

Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23009-1

The product you are viewing cross references to these numbers

Set of Four VTF Adjustable Lowering Springs for Boxster and Cayman
For cars with and without PASM



Fits
Porsche 981 Boxster / Cayman
Porsche 981 Boxster S / Cayman S
Porsche 982 (718) Boxster / Cayman
Porsche 982 (718) Boxster S / Cayman S

Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)

Approx. Front Lowering - 10mm to 25mm
Approx. Rear Lowering - 20mm

These are the perfect answer for cars equipped with electronic shock absorbers.

Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

Only the front springs are adjustable on this kit

• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23006-1

The product you are viewing cross references to these numbers

Set of Four VTF Adjustable Lowering Springs for cars with PASM



Fits
Porsche Macan (95B, 95BN) 04/2014>> with PASM
WITHOUT Air Suspension

Height Adjustable Springs
for original shock absorbers with electronic damping (PASM)

Macan, S, turbo
Approx. Front Lowering - 40mm to 60mm
Approx. Rear Lowering - 30mm to 50mm

Macan, GTS
Approx. Front Lowering - 30mm to 50mm
Approx. Rear Lowering - 15mm to 35mm

H&R height adjustable spring systems combine standard shock absorbers with variable lowering. The electronic adjustment of adaptive shock absorbers
remains unrestricted and allows a choice between a comfortable or sporty suspension setup.

• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23001-2

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportively by yourself.
Including cars with Front Axle Lift system

Lowers car by: 20mm

Fits:
Porsche 992 turbo - 2020 to 2024
Porsche 992 turbo S - 2020 to 2024
for vehicles with PASM suspension
for vehicles with sports suspension

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.

H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28628-1

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.



Lowers car by: FRONT 30mm / REAR 30mm

Fits:
Porsche 971 Panamera Sport Turismo 4 / 4S, 4WD 2017>>
only with PASM sports suspension,


The Porsche Panamera Sport Turismo is the top class in terms of station wagons. And despite its inherently rock-solid sportiness you can go one step further when it comes to dynamics. Our sport spring kit, which lowers the centre of gravity by 30 millimetres on both axles.
excl. air suspension

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28648-1

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.

Lowers car by: 1.5-2.0 inches on average



Fits:
Porsche 992 (911) Carrera 2S Cabrio / Coupe 2020>>
Porsche 992 (911) Carrera 4S Cabrio / Coupe 2020>>
Porsche 992 (911) Targa 4S 2020>>

* Incl. PASM
* Incl. Front End Lift
Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.

H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28652-1

The product you are viewing cross references to these numbers

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.



Fits:
Porsche 981 Boxster / Boxster S , 2WD, 2012>> not for cars with PASM
Porsche 981 Cayman / Cayman S , 2WD, 2012>> not for cars with PASM

Lowers car by: FT 30-50mm / RR 30-50mm

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28743-1

The product you are viewing cross references to these numbers

H&R RSS Clubsport Adjustable Monotube Suspension kit.

Fits:
Porsche 986 Boxster / Boxster S, 2WD, 10/1996>> with approval Clubsport

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.

Lowers car by: FT 30-60mm / RR 30-50mm

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSS-37-511-1

The product you are viewing cross references to these numbers

H&R RSS Clubsport Adjustable Suspension kit.

Fits:
Porsche 944 / 924 / 968
incl. Cabrio,
with approval,
only for FA-inner lower strut mounting bracket opening = 20 mm inside!
only for cars with aluminum rear axle Clubsport

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.

Lowers car by: FT 30-60mm / RR 30-50mm

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSS-37-827-2

The product you are viewing cross references to these numbers

H&R RSS Clubsport Adjustable Suspension kit.

Fits:
Porsche 944 incl. S / 924S / 968
incl. Cabrio,
with approval,
only for strut base FA-inner lower strut mounting bracket opening = 18 mm inside! (see picture)
only for cars with aluminum rear trailing arm Clubsport

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.

Lowers car by: FT 230-60mm / RR 30-50mm

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSS-37-827-1

The product you are viewing cross references to these numbers

H&R RSS Clubsport Adjustable Suspension kit.

Fits:
Porsche 911 (996) Turbo, 4WD, with approval Clubsport

Lowers car by: FT 20-50mm / RR 20-40mm

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSS-37-462-2

The product you are viewing cross references to these numbers

H&R RSS Clubsport Adjustable Suspension kit.

Fits:
Porsche 911 (996) C4, 4WD, Carrera 4/4S with approval Clubsport

TUV Certificate

Lowers car by: FT 20-50mm / RR 20-40mm

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSS-37-462-1

The product you are viewing cross references to these numbers

H&R RSS Clubsport Adjustable Monotube Suspension kit. 

Fits:
Porsche 911 (996) C2, 2WD, Carrera 2 incl. Cabrio/Targa, with approval Clubsport


TUV Certificate

Lowers car by: FT 30-60mm / RR 30-50mm

H&R height adjustable coil overs are designed for every driver who wants to realise their sporty ambitions with superior technical suspension solutions.

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSS-37-510-1

The product you are viewing cross references to these numbers

H&R Adjustable RSS Clubsport Monotube Coil Over Suspension kit

Fits:
Porsche 911 (993), 2WD, Carrera 2/2S, Carrera 4/4S, Cabrio/Targa, 911 Turbo,  without TÜV® certificate
Clubsport version

H&R height adjustable coil overs are designed for every driver who wants to realize their sporty ambitions with superior technical suspension solutions.

Lowers car by: FT 30-60mm / RR 30-50mm

Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSS-37-954-1

The product you are viewing cross references to these numbers

H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.



Front & Rear Anti Roll Bar:
- Front - 26mm (not adjustable)
- Rear - 22mm (adjustable in 2 places)

Fits:
Porsche 987 Boxster Spyder 2009>>

Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33180-2

The product you are viewing cross references to these numbers