Porsche

Leather Dash Top RHD, Black.
The Porsche Leather Dash Top is a genuine OEM replacement upper dashboard panel, designed for Right-Hand-Drive (RHD) Porsche 911 (996) models up to 2002. Finished in premium black leather, this dash top provides the perfect blend of luxury, durability, and factory-correct fitment.

NOTE: LAST 1 IN STOCK

Fits:

• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2002
• Porsche 996 C4 3.6L 09/01-2002
• Porsche 996 C4S 3.6L 09/01-2002
• Porsche 996 TURBO 2000-02
• Porsche 996 GT2 2001-02
• Porsche 996 GT3 MKI 2001-02
  
  

Diagram Ref No 26

What This Product Does:

This product provides the finished, premium surface for the top of the instrument panel / dash, replacing a hard or painted top with a leather surface for aesthetics and improved glare control.

Signs / Symptoms Of Wear Or Replacement Needed: 

• The leather is cracked, warped, split, or faded from sun exposure over time.
  
• There is peeling or delamination of the leather from the dash substrate.
  
• Discoloration or contrast versus the rest of the dash leather, making it look mismatched.
  
• Surface imperfections such as indentations, sagging, wrinkles that affect appearance.
  
  

Why Replacement Matters:

• Restores a factory-fresh, high-quality appearance to the cabin, especially in cars where leather dashboards are expected as part of the interior finish.
  
• Maintains consistency across interior surfaces — matching other leather panels, seats, door tops etc.
  
• Reduces sun glare / reflection issues — a leather dash top is often less reflective than a painted hard surface.
  
• Protects the dash structure underneath from damage, UV exposure, and material degradation.
  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655202601ETQ

The product you are viewing cross references to these numbers

Window crank handle cover in Black.
Sold each.

This window handle cover is a genuine OEM interior trim piece for classic Porsche 911 and 912 models. This cover sits at the base of the manual window crank handle, giving the door panel a clean, finished look while shielding the upholstery from scuffs and wear.

Fits:
Porsche 911 1965 - 1983

Diagram ref no 9

What This Product Does:
•  Provides a protective barrier between the window crank and the door panel
•  Prevents scratches, marks, and wear on the interior trim
•  Restores the original, factory-correct appearance of your Porsche interior

With age, original covers can crack, fade, or go missing, leaving the interior unfinished and exposing the door panel to damage. Replacing with a genuine Porsche cover ensures exact fit, premium material quality, and an authentic factory look—preserving both appearance and value of your classic Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90154248220700

The product you are viewing cross references to these numbers

Cover For Rear Door Shell, Satin Black.
The Porsche Rear Door Shell Covers are genuine OEM trim components finished in elegant satin black. Designed to fit seamlessly onto the rear door shell, these covers provide both protection and a clean, factory-finished appearance.

Fits:

• Porsche Cayenne 3.2L V6 2003-06
• Porsche Cayenne S 4.5L V8 2003-06
• Porsche Cayenne Turbo 4.5L 2003-06
• Porsche Cayenne Turbo S 4.5L 2006>>
• Porsche Cayenne 3.0L Diesel 2007-10
• Porsche Cayenne 3.6L 2007-10
• Porsche Cayenne S/GTS 4.8L 2007-10
• Porsche Cayenne Turbo / Turbo S 4.8L 2007-10

What This Product Does:

Acts as a trim / finishing cover for the rear door shell, often in a “satellite” area (where the door’s rear edge or junction meets other bodywork).

Signs / Symptoms It Needs Replacement:

• It is cracked, warped, or broken and no longer fits flush.
  
• The finish is faded, peeling, or mismatched compared to the rest of the door shell.
  
• It’s loose or misaligned, showing gaps or inconsistent fit.
  
• You see rust, corrosion, or exposure behind the cover due to its absence or damage.
  
• It’s missing entirely—or one side is missing, causing visual asymmetry between left and right.

Why Replacement Matters:

• Restores appearance: A correct cover gives the door a finished, factory look with clean lines.
  
• Protects the bodywork behind the cover by shielding edges and joints from elements.
  
• Prevents damage: Without a proper cover, edges may get chipped, dirt may ingress, or paint damage may occur.
  
• Maintains matching symmetry: Replacing both covers ensures both sides look balanced and consistent.
  
  

Diagram Ref No 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95553391

The product you are viewing cross references to these numbers

Cabrio Top Stowage Box Cover, Primed.

The Porsche Cabrio Top Stowage Box Cover is a genuine OEM replacement lid designed for the convertible top compartment of Porsche 911 (996) models. Finished in primer, this panel is ready to be painted to match your vehicle’s exterior color for a seamless factory look.

Fits:

• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005

What This Product Does:

• This cover lids over the “stowage box” or compartment where the convertible / cabriolet roof is stored when retracted. It helps protect the folded soft top and its compartment from weather, debris, and exposure.
• Provides a flush, finished look when the roof is down, ensuring the compartment is sealed and aesthetically integrated with the rear bodywork.
• Protects internal components (like hydraulics, frame, seals, wiring) inside the roof compartment from water, dust, and mechanical damage.

Signs / Symptoms That It Needs Replacement:

• It is cracked, damaged, or warped, not closing properly or sealing flush.
  
• The paint or finish is poor, or the primed surface has been exposed to corrosion.
• It fails to properly align or latch, leaving the stowage compartment exposed.
• Moisture or dirt enters the roof compartment area, possibly damaging soft top materials or mechanisms.
• The current cover is missing, or you’re refreshing / restoring the car and want a correct OEM replacement.

Why Replacement Matters:

• Restores a clean, factory-finished look to the soft-top storage area.
  
• Protects the soft top and its folding mechanism from weather, debris, and UV exposure.
  
• Prevents intrusion of water, dust, or leaves into the roof compartment, which can damage interior components.
  
• Helps maintain correct alignment and sealing, ensuring the roof stows neatly and safely.
  
• Using the OEM primed cover ensures proper dimensions, hinge locations, latch alignment, and ease of finishing with paint to match.

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651401101GRV

The product you are viewing cross references to these numbers

Drain Hose For Coolant Reservoir.
The Porsche Drain Hose for Coolant Reservoir is a genuine OEM component that ensures your cooling system operates efficiently under all conditions. This hose connects the coolant reservoir to the overflow system, allowing excess coolant to safely flow into the expansion tank when system pressure rises.

Fits:

• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 997 Carrera 2 3.6L 2005-08
• Porsche 997 Carrera 2S 3.8L 2005-08
• Porsche 997 Carrera 4 3.6L 2005-08
• Porsche 997 Carrera 4S 3.8L 2005-08
• Porsche 997 TURBO 2007-09
• Porsche 997 GT3 2007-09
• Porsche 997 GT2 2007-09
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII GT3 2010-11
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13

What This Product Does:
This hose functions as a drain / overflow path in the cooling system. When coolant pressure or volume is high (due to heat, expansion), excess coolant flows into the reservoir or overflow tank via this hose.

Symptoms / Signs Of A Faulty / Damaged Hose:

• Coolant leaks (weeping or dripping) around the reservoir, hose connection points, or under the car.
  
• Overheating or fluctuating temperatures, if coolant isn’t flowing properly or the overflow path is blocked.
  
• Loss of coolant in the reservoir over time, without other visible leaks.
  
• A hose that is cracked, brittle, perished, or has collapsed (blocking flow).
• Bubbling or gurgling noises in the cooling system or reservoir due to trapped air or improper overflow.
• Overflow tank that doesn’t fill or returns little coolant on cooling — i.e., the system is not cycling properly through the reservoir.

Why Replacement Matters:

• Ensures the overflow system works correctly — letting excess coolant go to the reservoir instead of causing pressure issues or spillage.
  
• Prevents coolant loss or leaks, which can lead to engine damage from low coolant or overheating.
  
• Maintains system pressure balance, which is critical in modern closed-loop cooling systems for proper pump flow and temperature control.
  
• Avoids damage to other parts — a leaking hose can spray coolant onto other components (belts, wiring, bodywork) causing corrosion or damage.
  
  

Diagram Ref No 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610629705

The product you are viewing cross references to these numbers

Headlamp Bracket Clamping Bow.
The Porsche Headlamp Bracket Clamping Bow is a genuine OEM support component designed to secure the headlamp unit firmly in place. Acting as a stabilizing brace, it ensures the headlight remains correctly aligned with the bodywork, maintaining both safety and appearance.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche 997 Carrera 2 3.6L 2005-08
• Porsche 997 Carrera 2S 3.8L 2005-08
• Porsche 997 Carrera 4 3.6L 2005-08
• Porsche 997 Carrera 4S 3.8L 2005-08
• Porsche 997 TURBO 2007-09
• Porsche 997 GT3 2007-09
• Porsche 997 GT2 2007-09
• Porsche 997 MKII Carrera C2 3.6L 2009-12
• Porsche 997 MKII Carrera C4 3.6L 2009-12
• Porsche 997 MKII Carrera C2S 3.8L 2009-12
• Porsche 997 MKII Carrera C4S 3.8L 2009-12
• Porsche 997 MKII GT3 2010-11
• Porsche 997 MKII Turbo 2010-13
• Porsche 997 MKII GT2 RS 2011-13

What This Product Does:
Acts as a support arm / brace / clamp that holds the headlight housing / lens in correct alignment with the body and mounting brackets.

Symptoms / Signs Of A Faulty / Missing Bracket:

• Headlights sagging, tilting, or misaligned (beam direction off)
• Vibrations or rattling from the headlamp area while driving
  
• Gaps or misfit around the headlamp bezel or housing edges
  
• Stress or bending in the bracket area, cracks, or broken mounting points
  
• Difficulty in properly aiming or aligning the headlight after removal / reinstallation

Why Replacement Matters:

• Restores correct headlamp alignment & aim, which is critical for safety and compliance.
  
• Prevents mechanical stress or damage to headlamp housing, lenses, or bracket as movement or sagging can cause strain.
  
• Eliminates vibration, rattling, or movement noise from the headlamp.
  
• Maintains aesthetic integrity — headlamps flush with body, proper gaps, clean appearance.

Diagram Ref No 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99763127301

The product you are viewing cross references to these numbers

Bellow Clamp For CV Boot, 34MM.
The Porsche Bellow Clamp for CV Boot is a genuine OEM clamp designed to secure the constant velocity (CV) joint boot in place. This heavy-duty band keeps the rubber boot tightly sealed to the driveshaft and flange, ensuring that vital CV joint grease stays inside while dirt, water, and debris stay out.
Sold Each.

Fits:

• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 928 4.5L 1978-82
• Porsche 928S2 4.7L 1984-86
• Porsche 928S4 5.0L 1987-92
• Porsche 928GTS 5.4L 1992-95
• Porsche 944 2.5L 8V 1982-87
• Porsche 944 2.7L 8V 1988-89
• Porsche 944S 2.5L 16V 1987-88
• Porsche 944S2 3.0L 16V 1989-91
• Porsche 944 Turbo 2.5L 8V 1985-88
• Porsche 944 Turbo 2.5L 8V 1989-91
• Porsche 944 Turbo S 2.5L 8V 1988>>
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94
• Porsche Boxster 986 2.5L 1997-99
• Porsche Boxster 986 2.7L 1999-02
• Porsche Boxster S 986 3.2L 1999-02
• Porsche Boxster S 986 3.2L 2003-04
• Porsche 993 (911) C2 1994-97
• Porsche 993 (911) C4 1994-97
• Porsche 993 (911) RS 1994-97
• Porsche 993 (911) C2S 1994-97
• Porsche 993 (911) C4S 1994-97
• Porsche 993 (911) TURBO 1994-96
• Porsche 993 (911) GT2 1994-97
• Porsche 993 (911) TURBO S 1994-97
• Porsche 996 C2 3.4L 1997-08/01
• Porsche 996 C4 3.4L 1997-08/01
• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05
• Porsche 996 GT2 2001-05
• Porsche 996 GT3 MKI 1999-02
• Porsche 996 GT3 MKII 2003>>
• Porsche 997 TURBO 2007-09
• Porsche 997 GT2 2007-09

What This Product Does:

The clamp fastens the rubber or neoprene CV boot onto the shaft and/or housing flange, sealing it in place so the boot remains tight and doesn’t slip.
It helps keep grease inside the CV joint (lubricating the joint) and prevents dirt, water, debris from penetrating the boot and damaging the joint.
Ensures the boot stays under the correct tension so it doesn’t collapse or leak under motion or load.

Symptoms / Signs Of Failure:

• Grease leaking out of the CV boot, leading to a messy axle or splattered grease near the joint.
  
• CV boot collapse or deformation — when not secured, the boot may shift or fold.
  
• Ingress of dirt, water or debris into the CV joint, leading to accelerated wear, pitting, or noise.
  
• Clicking, popping, or humming noises under load or while turning, caused by a failing CV joint.
  
• Loose or slipping boot edges, or visible gaps between the boot and flange.

Why Replacement Matters:

• Protects the CV joint’s longevity — by keeping grease in and contaminants out, the joint lasts far longer.
  
• Prevents costly drivetrain repairs — a damaged CV joint is expensive; a failed boot clamp is cheap.
  
• Maintains proper boot tension and seal so the boot doesn’t move, stretch, or fail prematurely.
  
• Ensures consistent, quiet performance — a well-sealed boot helps avoid noise from a damaged joint.
  
  

Diagram Ref No 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833225701

The product you are viewing cross references to these numbers

Alternator Belt Pulley Shim.
The Porsche Alternator Belt Pulley Shim is a genuine OEM spacer washer used in the alternator belt pulley assembly. Designed to fine-tune pulley alignment, this 0.5 mm shim ensures the alternator belt runs true, preventing misalignment, premature wear, and belt noise.
Sold Each.

Fits:

• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93

What This Product Does:

• The shim adjusts the axial spacing (depth) of the alternator pulley relative to the housing or bearing so that the alternator belt alignment is correct.
• It ensures the pulley is neither too far in nor too far out, thereby avoiding misalignment with the belt path, which could cause wear, noise, or belt slip.
• Proper spacing is critical for belt tension, pulley alignment, and smooth operation of the alternator / drive belt.
  
  

Signs / Symptoms A New Shim May Be Needed:

• There is belt misalignment — the belt rides off center or rubs on pulley edges or guides.
  
• Unusual belt noise such as squealing or chirping, especially under load or at startup, which might indicate pulley or belt misalignment.
  
• Excessive belt or pulley wear — uneven wear on belt ribs or pulley surfaces.
  
• When installing a replacement alternator / pulley you find the original shim is missing, damaged, or of unknown thickness.
• You notice vibration or play in the alternator pulley assembly, possibly due to improper spacing.

Why Replacement Matters:

• Belt Misalignment – Without correct spacing, the alternator belt may track incorrectly, slip, or ride off the pulley edges.
  
• Premature Wear – Misaligned belts put stress on both the belt and pulley, causing them to wear out faster.
  
• Noise and Vibration – A missing or damaged shim often results in squealing, chirping, or vibration under load.
  
• Charging Issues – A poorly aligned belt can slip, reducing alternator efficiency and risking undercharging of the battery.
  
• Avoidable Damage – Replacing a small shim prevents more expensive damage to the alternator, pulleys, and belt system.
  
  

Diagram Ref No 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410626800

The product you are viewing cross references to these numbers

Throttle Return Spring.
The Porsche Throttle Return Spring is a genuine OEM component designed to ensure reliable throttle response and safe operation. Installed in the throttle linkage assembly, this spring provides the tension needed to return the throttle plate to the closed position whenever the accelerator is released.

Fits:

• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC

What This Product Does:

• The Throttle Return Spring provides the force that pulls the throttle (or control linkage) back to its idle / closed position when the accelerator is released.
• In a fuel injection or mixture control setup, such a spring keeps tension on the throttle and ensures the throttle plate or mixture valve returns reliably, preventing it from staying open or partially open.
• It helps maintain consistent throttle behavior, ensures smooth transitions off-throttle, and prevents unwanted throttle creep.

Symptoms Of A Worn / Broken Return Spring:

• The throttle may not return fully: the engine feels like it wants to hold higher RPM or won’t settle at idle.
• Delayed or sluggish engine deceleration when releasing the accelerator.
• Inconsistent or unstable idle, perhaps with the throttle slightly open.
• A “creep” effect — the engine seems to maintain higher revs when it should drop.
• Visible damage to the spring (stretched, corroded, weakened) or the spring detached from its linkage.

Why Replacement Matters:

• Ensures safe, predictable throttle behavior — a faulty return spring can lead to unsafe throttle response or lag in returning to idle.
  
• Prevents throttle slop or hang — keeping the linkage under correct tension improves drivability and control.
  
• Protects against accelerator-related faults — if the throttle doesn’t retract cleanly, it may stress other linkage parts or cause erratic engine behavior.
  
• It’s a relatively inexpensive part that can avoid more severe problems with the throttle / injection linkage over time.

Diagram Ref No 38

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91111016502

The product you are viewing cross references to these numbers

Lever For Hand Throttle Cable Washer.
The Porsche Lever for Hand Throttle Cable Washer  is a genuine OEM plastic bearing washer used in the lever assemblies of classic Porsche models. This washer provides smooth, low-friction movement between the lever and its mounting surface, ensuring precise operation of the hand throttle, heater, or control cable systems.
Sold Each.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)

What This Product Does:

• It functions as a bearing / spacer / washer for a pivot or lever — helping the lever rotate smoothly over a shaft without friction or wear.
• Helps maintain correct lever geometry, spacing, and alignment so the lever (throttle/actuator lever) doesn’t bind or rub.
• Reduces wear between metal parts by inserting a plastic buffer / washer.

Symptoms / Signs Of Wear Or Failure:

• The actuating lever (or associated control lever) feels stiff, rough, or binds.
  
• Noise at the pivot point (squeak, creak) when the lever moves.
  
• Excessive play or looseness at the lever mount — the lever might wobble.
  
• The washer is cracked, deformed, missing, or the lever shows wear marks.
• The parts that the lever interacts with show wear from metal-on-metal contact.

Why Replacement Matters:

• Restores smooth lever operation, which is important for throttle control, heater / control linkages, or whatever system is using that lever.
  
• Prevents premature wear on levers, shafts, and mounts by keeping a proper bearing interface.
  
• Maintains correct geometry and alignment of the lever system, helping ensure the cable or actuator responds correctly.
• Helps eliminate noise and play in the mechanism.

Diagram Ref No 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142473700

The product you are viewing cross references to these numbers

Wiper Arm Linkage Rubber Bush, Front.
The Porsche Wiper Arm Linkage Rubber Bush is a genuine OEM component designed to cushion and stabilize the wiper arm shaft within the front wiper linkage assembly. This rubber bushing eliminates excess play, reduces vibration, and ensures smooth, consistent wiper operation.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 924 2.0L 1976-79
• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 928 4.5L 1978-82
• Porsche 928S 4.7L 1981-83
• Porsche 928S2 4.7L 1984-86
• Porsche 914 (1970-1976)

What This Product Does:

• The rubber bush cushions the wiper shaft / linkage pivot / mount, reducing play, vibration, and ensuring the wiper arm linkage operates smoothly.
• It helps maintain correct alignment between the wiper arm and pivot, so that the wiper blade contacts the windshield uniformly without skipping or lifting.
• It prevents metal-to-metal contact in the wiper linkage, which protects shafts, mounts, and the linkage parts from wear and vibration noise.

Symptoms Of A Worn / Damaged Rubber Bush:

• Wiper arm play or looseness — the arm may wiggle slightly or not feel tight at the pivot.
  
• Chattering, skipping, or noise when the wiper moves — due to uneven pressure or vibration in the linkage.
  
• Non-uniform wiping / streaks — parts of the windshield might not be cleared properly because the blade isn’t held firmly and consistently.
  
• Unusual vibration or rattle from the wiper mechanism, especially on rough roads or at higher speeds.
  
• Visible cracks or deterioration in the rubber bush when inspecting it — it might be hardened, split, or deformed.
  
  

Why Replacement Matters:

• Restores precise, quiet wiper operation — ensuring the wiper blade maintains good contact across the windshield, even under stress.
  
• Prevents premature wear on linkage, shafts, and mounts by reducing unwanted movement and vibration.
  
• Helps maintain the safety and visibility — poor wiping performance in rain or snow can reduce driver sight.
  
• Keeps the wiper assembly more durable — a degraded bushing can lead to more significant repair down the line.

Diagram Ref No 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162892400

The product you are viewing cross references to these numbers

Washer For Camber Adjuster 12.4 x 25 x 4MM.
The Porsche Washer for Camber Adjuster is a genuine OEM component designed to ensure precise suspension alignment. Used as part of the camber adjustment assembly, this washer acts as a spacer and load distributor, helping maintain secure and accurate positioning of the suspension arms.
Sold Each.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1969-1969 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 928 4.5L 1978-82
• Porsche 928S2 4.7L 1984-86
• Porsche 928S4 5.0L 1987-92
• Porsche 928GTS 5.4L 1992-95

What This Product Does:

• As a washer used in a camber adjuster, its job is to act as a spacer or shim between the adjuster mechanism and adjacent components (arm, bracket, nut, etc.).
  
• Helps maintain the correct alignment spacing / preload so that camber adjustment geometry is precise and held firmly.
  
• Prevents metal-to-metal friction, distributes load, and ensures fasteners seat properly.

Signs / Symptoms Of Fault Or Need For Replacement:

• Camber adjustment doesn't stay stable — alignment drifts or slips.
• Unwanted play in suspension / control arm area near the adjuster.
• When removing or reinstalling camber adjuster, the original washer is worn, bent, or shows damage.
• Hard to achieve the correct alignment or shim stack due to missing or damaged spacer.

Why Replacement Matters:

• Ensures accurate alignment — camber settings rely on precise spacing, and a worn or missing washer can ruin alignment.
  
• Preserves hardware life — correct spacing reduces uneven stress or wear on adjuster bolts, bushings, or arms.
• Maintains safety and handling — camber out of spec can lead to poor tyre contact, excessive wear, or less stable cornering.
  
  

Diagram Ref No 29

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG33314302

The product you are viewing cross references to these numbers

Retaining Clip For Brake Hose.
The Porsche Brake Hose Retaining Clip is a genuine OEM fastener designed to securely lock the flexible brake hose into its mounting bracket. This small but vital part ensures the brake hose remains firmly in place, preventing movement, rubbing, or kinking that could compromise braking performance.
Sold Each.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 968 3.0L 1992-94
• Porsche 968 Sport 3.0L 1994-95
• Porsche 968 CS 3.0L 1993-95
• Porsche 968 Turbo S 3.0L 1993-94
• Porsche 356B 1959-63
• Porsche 356C 1963-65
• Porsche 914 (1970-1976)

What This Product Does:
Keeps the brake hose (flexible line) securely attached to fixed brake line or mounting point, preventing movement, rubbing, or contact with other components.

Symptoms / Signs Of Wear Or Failure:

• The brake hose seems loose or moves when nudged (something should hold it firmly in place).
• Rubbing marks or wear on the hose where it may have been contacting surrounding metal parts.
  
• Noise or vibration from the brake hose area, especially under braking or road feedback.
  
• The clip is cracked, broken, or missing upon inspection.
  
• Hose sagging or misrouted in the wheel well or near suspension components.

Why Replacement Matters:

• Safety: A hose that moves or rubs can wear through its outer sheath, eventually risking a leak or hose failure.
  
• Durability: Proper routing and secure attachment extend hose life by reducing chafing, bending stress, or vibration fatigue.
  
• System integrity: Loose brake lines can move under braking, affecting pressure stability or interfering with other components.
  
• Prevent damage: A sliding or loose hose may damage paint, wiring, or suspension parts.
  
  

Diagram Ref No 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

803611715

The product you are viewing cross references to these numbers

Front Wiper Arm (Drivers Side) RHD.
The Porsche Front Wiper Arm is a genuine OEM replacement part for the driver’s side on right-hand-drive models. Designed to deliver smooth, even pressure across the windshield, this wiper arm ensures maximum contact between the blade and glass for clear visibility in all weather conditions.
For Right Hand Drive Cars ONLY!

NOTE: LAST 1 IN STOCK

Fits:

• Porsche 924 2.0L 1980-85
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-85

What This Product Does:
The wiper arm is the mechanical lever that connects the wiper motor via linkage to the wiper blade and transmits motion, pressing the blade onto the windshield to wipe.

Symptoms Of A Faulty Or Worn Wiper Arm:

• The wiper blade lifts off the windscreen in parts of its sweep — it’s not pressing properly.
• Chattering / skipping noise as the blade moves across the glass, indicating inconsistent pressure or misalignment.
  
• Poor wiping performance (streaks, missed spots) even with a new blade — could be the arm angle is off.
  
• Corrosion, bending, or damage to the arm, weakening its ability to hold the blade firmly.
  
• Loose, wobbly, or play in the wiper arm mounting or pivot — it doesn’t stay fixed.
  
  

Why Replacement Matters:

• Maintains clear visibility in rain or snow — a flawed wiper arm severely impacts safety.
  
• Prevents damage to the blade and windshield — a misaligned or bent arm can wear out the blade prematurely or scratch the glass.
  
• Ensures even pressure and full sweep — a correct arm placement ensures the blade contacts the glass properly everywhere.
  
• Keeps the wiping system reliable — an OEM arm is made to correct strength, geometry, and fit for optimal performance.
  
• Avoids more costly damage — a failed wiper system can lead to scratched or damaged windscreen from a blade mis-tracking.

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

478955027A

The product you are viewing cross references to these numbers

Door Window Vibration Wedge / Thrust Wedge.
The Porsche Door window vibration wedge / thrust wedge is a genuine OEM component designed to secure and stabilize the door window glass inside the frame. Also known as a window thrust wedge or window vibration wedge, this part helps maintain proper glass alignment, prevents rattles, and reduces wind noise when driving.

Fits:

• Porsche 928 4.5L 1978-82
• Porsche 928S 4.7L 1981-83
• Porsche 928S2 4.7L 1984-86
• Porsche 928S4 5.0L 1987-92
• Porsche 928GT 5.0L 1989-91
• Porsche 928GTS 5.4L 1992-95

What This Product Does:

The thrust wedge works inside the door window and door shell / door surround area to help ensure the window glass is properly aligned within its track and that the window doesn’t vibrate, rattle, or shift within the door frame.

Symptoms / Signs It Needs Replacing:

• Window rattle or vibration, especially while driving at speed, as the glass isn’t held firmly.
  
• Excessive play in the window — meaning the glass moves or wiggles more than it should.
  
• Misalignment of window, where it doesn’t close flush or track smoothly.
  
• Noise from wind or whistling, particularly around the window/door shell interface.
  
• The wedge is visibly cracked, deformed, or absent when panels are removed.

Why Replacement Matters:

• Restores precise window alignment and stops unwanted vibration or movement of the glass.
  
• Reduces or eliminates noise, wind whistling or rattles due to a loose or misaligned window.
  
• Protects seals and weatherstrips by keeping glass pressed properly into seals — helps prevent leaks.
• Improves longevity of window channels, glass edges, and seals by maintaining correct tolerances and reducing wear.

Diagram Ref No 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92853734

The product you are viewing cross references to these numbers