Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design91.uk/images/schemaLogo.png https://www.design91.uk/images/schemaLogo.png +443456003478 https://www.design91.uk Facebook Instagram

FibreTek

FibreTek
About FibreTek

FibreTek for Porsche

FibreTek parts for Porsche models from Design911, typically focused on lightweight exterior and body components for styling and motorsport-inspired builds.

A Quick Look at FibreTek

FibreTek information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where FibreTek is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.

  • Typical reasons to choose these parts include replacing damaged panels, saving weight, and achieving a specific motorsport look on track-focused Porsche builds.
  • Common issues with composite panels include panel fit variation, sensitivity to surface preparation, cracking at mounting points, and paint problems if preparation is not done correctly.
  • Practical tips include allowing for possible trimming or adjustment during test-fit, using the correct fixings, and avoiding over-tightening fasteners around composite mounting areas.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Exterior Styling / Spoilers — Owners change exterior styling parts to update the look, improve aerodynamics, replace damaged trim, or match a specific Porsche style where applicable. Brand and material choice matter for how well parts fit, how easily they can be painted, and how they integrate with factory mounting points and any sensors.

  • Check whether parts arrive primed or finished, and always test-fit to your Porsche before paint or modification.
  • Some styling components may need drilling, brackets, or adjustment—confirm what is required before starting work.

Rear Spoilers / Aerofoil — Rear spoilers and aerofoils are used to change the look, restore damaged original items, or add downforce where appropriate for how the Porsche is driven. Choice of design and construction affects stability at speed, mounting strength, and whether the spoiler interferes with factory mechanisms.

  • Assess existing mounts for cracks or wobble at speed, and check paint or clearcoat for fading and delamination.
  • Consider the overall aero balance of the car and whether any reinforcement or backing plates are recommended by the manufacturer.

Face Lift Kits — Face lift kits are typically chosen to modernise the appearance of a Porsche by updating bumpers, lights, and trim to a later look, or when replacing damaged parts and opting to upgrade instead of like-for-like. Brand choice influences how accurately brackets line up and how well lighting and wiring integration are supported.

  • Before purchase, check whether additional wiring, adaptors, or coding are needed for lights and DRLs on your Porsche.
  • During installation, focus on panel gaps around bumpers, wings, and bonnet lines, and check for condensation in lights after fitting.

Special Offer Parts — Special offer parts are often used when carrying out routine Porsche maintenance or refresh work and allow multiple wear items to be replaced together. They are commonly used for service parts, brake components, or suspension consumables when planning larger jobs.

  • Confirm exact fitment for your Porsche model and year before buying, as offers are only good value when the parts are correct.
  • Check the store’s return conditions for discounted items and keep packaging until you are sure the parts are suitable.

Body Parts — Porsche body parts are replaced after damage, corrosion, or as part of restoration work where correct panel alignment and gaps are important. In practice, owners often combine panels with new brackets, fixings, and seals to reduce rattles and water ingress.

  • Always test-fit panels and check gaps before paint; once painted, options for adjustment and return are limited.
  • Plan to renew clips, seals, and fixings, as tired hardware is a frequent cause of poor fit, noise, and leaks.

Explore FibreTek at Design911

View the current FibreTek range for Porsche at Design911, then filter by model and category to narrow down to the right parts.

DISPLAYING 177 to 192 (of 226 products)
FSK987RS
Product Information
Product Information
Front Bumper & Lower Front Spoiler + RS Top Intake

fibretek


Fits:
Porsche Cayman 987 from 11/2005 for variant Roadster / Coupe
Porsche Boxster 987 from 2004 for variant Roadster / Coupe

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front Bumper & Front Lower spoiler is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

For the Lamps you will need CLICK HERE

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

FSK997
Product Information
Product Information
Front Bumper for Porsche 911 (997) built in 2005-06/2008 for variant Convertible / Coupé.

fibretek

Front bumper GT3 Look

Use the existing front drive lamps from 997 Carrera.

• Front bumper is made ​​of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Air vents required separately:

Centre grille vent 9975055410101C
Left side grille vent 9975059850001C
Right side grille vent 9975059860001C
Top grille vent 9975753279001C

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSK997
9975055410101C
9975059850001C
9975059860001C
9975753279001C
9975753279301C

The product you are viewing cross references to these numbers
HF993
Product Information
Product Information
Rear spoiler fits Porsche 911 (993) 1993-1998 for variant Coupe (does not fit on convertible).

fibretek

You will also need the original grilles separate parts 99351233303G2X Top Grill
9935125010070K Bottom Grille

• The angle adjustable rear wing paintable fiberglass
• Look in the GT2

• Currently, no TÜV approval
• Mounting hardware, if necessary
• installation Instructions

• Rear spoiler is manufactured from high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
HSK993
Product Information
Product Information
Rear Bumper for Porsche 911 (993) built in 1993-1998 for variant Convertible / Coupé

fibretek

• Currently, no TÜV approval
• Mounting hardware, if necessary
• installation Instructions

• Rear bumper is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
Special Offer
FSK993
Product Information
Product Information
Front Bumper for Porsche 911 (993) built in 1993-1998 for variant Convertible / Coupé

fibretek

Front bumper accessory for turbo-look cars

• TÜV approved
• Mounting hardware, if necessary
• installation Instructions

• Front bumper is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note indicators are not included. It needs 997 MKII front indicators - available separately

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
FSK997C
Product Information
Product Information
Front Bumper for Porsche 911 (997) built in 2005-06/2008 for variant Convertible / Coupé.

fibretek

Front bumper accessory turbo-look

• Currently, no TÜV approval,
- Front Indicators 997 Turbo - Front Drive Lamps 997 Turbo - Air intakes Grilles 997 Turbo and Spoiler lip 997 Turbo are not included. These can be ordered with us.

• Front bumper is made ​​of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
FSK997B
Product Information
Product Information
Front Bumper for Porsche 911 (997) built in 2005-06/2008 for variant Convertible / Coupé

fibretek

Front bumper accessory in GT/2-Look

Extra fitting parts needed are:
1 x centre top air duct Top 9975753278001C
1 x centre top air duct Lower 99757532580
1 x lower lip spoiler, 9975055578001C
1 x inner air duct vents for the bumper Left 9975055638101C
1 x inner air duct vents for the bumper Right 9975055648101C
1 x inner air duct vents for the bumper Centre 9975055418101C
1 x Tow eye cap 99750570380G2X

(Please also order 2 x 997 turbo front indicators if you fitting this to a standard 997 model)

• Front bumper is made ​​of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
Special Offer
FA997B
Product Information
Product Information
Front spoiler lip for Porsche 911 (997) 07/2008-2011 (from facelift) for variant Coupe

fibretek

Not suitable to:
Turbo / TurboS / GT2 / GT3 / GT3 RS


• Currently, no TÜV approval,
• Mounting hardware, if necessary
• installation Instructions

• Front spoiler lip is made from high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
FA997
Product Information
Product Information
Front spoiler lip for Porsche 911 (997) 2004-07/2008 (before facelift) for variant Coupe.

fibretek

Not suitable to:
Turbo / TurboS / GT2 / GT3 / GT3 RS


• Currently, no TÜV approval,
• Mounting hardware, if necessary
• installation Instructions

• Front spoiler lip is made from high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
FA987B
Product Information
Product Information
Front spoiler lip for Porsche Boxster 987 from year 2005 to 2009 variant for Roadster

fibretek

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front spoiler lip is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
FSK987
Product Information
Product Information
Front Bumper & Lower Front Spoiler


fibretek

Fits:
Porsche Cayman 987 from 11/2005 for variant Roadster / Coupe
Porsche Boxster 987 from 2004 for variant Roadster / Coupe

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front Bumper & Front Lower spoiler is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

You will need: Fog Lamps (no. 98763108205, 98763108105)

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

FA987C
Product Information
Product Information
Front spoiler lip for Porsche 987 Cayman 2005-2009 for variant Coupe

fibretek

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front spoiler lip is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
HSK911B
Product Information
Product Information
Rear bumper fit for 1997-2006 Porsche 911 (996) 1997-2006 for variant coupe / convertible (not GT2 / Turbo / 4S)

fibretek

• Rear bumper in the turbo-look

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Rear bumper is made ​​of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note you will need extra pipes extensions for tail pipes (C4S type) to fit Turbo Look bumper. You may also want to upgrade your tail pipes to bigger C4S type to fill the bigger cut out in bumper. Please add Turbo Tail pipe kit Part No. EXHAUSTKIT22

Does not come with toe eye cover

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
FSK986C
Product Information
Product Information
Front Bumper only for:
Porsche 911 3.4L (996) to 08/2001 model year for variant coupe / convertible
Porsche Boxster 986 1996-02 for variant Roadster

fibretek

Air intake grille and spoiler lip are not included.

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• Installation Instructions
• Front bumper is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: Due to the revised styling from the original front bumper, the new location of the tow-eye cover marginally inhibits insertion of tow-eye at the front, recommend using the rear bumper tow-eye location instead.

This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
Special Offer
FSK911
Product Information
Product Information
Front Bumper for Porsche 911 Type 996 2003-2006 for variant coupe / convertible

fibretek

Does not include front lip buy part number 9965059869301C

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front bumper is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
Special Offer
FSK910
Product Information
Product Information
Front Bumper for Porsche 911 Type 996 2003-2006 from GT3 Facelift for variant coupe / convertible

fibretek

• Vehicle TÜV approval, thus entry free
• Mounting hardware, if necessary
• installation Instructions

• Front bumper is made of high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.
DISPLAYING 177 to 192 (of 226 products)