DesignTek

DesignTek  Front strut brace, Carbon Fibre.

Fits
Porsche 991.1 Carrera 2012 - 2016
Porsche 991.2 Carrera 2016 - 2019
Porsche 991 Turbo 2014 - 2019

DesignTek Front Strut Braces Finished in light weight but very strong carbon fibre. 

Chassis stiffening devices adapt to the OEM strut mounts and helps to reduce chassis flex for better cornering and more precise handling on the street or track. This suspension upgrade is a must for any street or track driven car. 

Increase your driving experience and become at one with the road.

Lowering springs. Porsche 992 Cabrio 25mm Front / 20mm Rear 



Lowers by: 25mm Front / 20mm Rear 

Fits:
Porsche 992 3.0 CARRERA S/3,0 CARRERA 4S - Cabrio

• Adviced position of the spring seats at rear axle (slot adjustment), slot from the bottom: 3/5, optional 2/5 for vehicles with sport design package
• With / without front axle lift system
• Only for vehicles with sport suspension or vehicles with PASM sport suspension
• Not for vehicles with standard suspension, not for vehicles with PASM standard suspension

DesignTek Porsche lowering springs offer the handling characteristics and aggressive appearance that Porsche owners have been looking for, without the harsh ride characteristics of less-advanced spring systems. DesignTek Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602009922

The product you are viewing cross references to these numbers

Lowering springs. Porsche 992 Coupe 25mm Front / 20mm Rear 



Lowers by: 25mm Front / 20mm Rear 

Fits:
Porsche 992 3.0 CARRERA S/3,0 CARRERA 4S - Coupe 

• Adviced position of the spring seats at rear axle (slot adjustment), slot from the bottom: 3/5, optional 2/5 for vehicles with sport design package
• With / without front axle lift system
• Only for vehicles with sport suspension or vehicles with PASM sport suspension
• Not for vehicles with standard suspension, not for vehicles with PASM standard suspension

DesignTek Porsche lowering springs offer the handling characteristics and aggressive appearance that Porsche owners have been looking for, without the harsh ride characteristics of less-advanced spring systems. DesignTek Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3602009921

The product you are viewing cross references to these numbers

Exhaust sport headers with 200 cell catalytic converter.

Fits
Porsche 992 GT3 4.0L / 992 GT3RS

Performance headers improve exhaust flow and sports car sound; Sport Headers Bypass Catalytic Converters.

• Sport catalytic converters increase performance (these are to be used with tuned or remapped cars only)
• Constructed from equal-length T304 stainless steel
• C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Direct replacement for the OEM headers with no cutting or welding required

Key technical information and benefits of the Exhaust Sport Headers for Porsche 992 GT3 by DesignTek:

Enhanced Performance: DesignTek's Exhaust Sport Headers are engineered to significantly improve the performance of your Porsche 992 GT3. They reduce exhaust restriction, allowing for better airflow and increased horsepower and torque.

Exhaust Note: The sport headers produce an exhilarating exhaust note, providing a more engaging driving experience. They create a distinctive sound that complements the GT3's high-performance character.

Catalytic Converter Cell reduction: By reducing the catalytic converter, these headers are designed for track-oriented driving. This helps maximize exhaust flow and performance, but it may not be street-legal in all areas. Please check local regulations before installation.

Durable Construction: Crafted from high-quality materials, DesignTek's race headers are built to withstand the demanding conditions of track use. They offer long-lasting durability and reliability.

When considering the purchase of Exhaust Race Headers with Cat Bypass for your Porsche 992 GT3, here are some factors to keep in mind:

Compatibility: Ensure that the race headers are compatible with your specific Porsche 992 GT3 model. Compatibility information can typically be found in the product specifications or by consulting with a knowledgeable retailer or Porsche specialist.

Track Use: These headers are primarily designed for track use due to the cat bypass. If you intend to use them on public roads, check local emissions and noise regulations to ensure compliance.

Professional Installation: It is highly recommended to have the race headers installed by a professional technician with experience in Porsche exhaust systems. Proper installation ensures optimal performance and avoids potential issues.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109926

The product you are viewing cross references to these numbers

Locking wheel bolt kit (+7mm/+15mm longer). Black plated 
Fits cars with smaller spacers on front (0mm-7mm) and larger spacer on rear (12mm-15mm)



Rusty old looking wheel bolts can spoil the look of your Porsche and even damage your alloy wheels.
Performance parts makers DesignTek have come out with a range of high quality locking wheel bolts to match their stainless wheel bolts range.

The Technical:
DesignTek wheel bolts are produced from SCM440 grade alloy steel which has good resistance to a wide variety of corrosive media including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is black-plated and salt spray tested 240 hours

Fits:
Porsche Boxster 986 / 987
Porsche 996 / 997
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608300003BLK

The product you are viewing cross references to these numbers

Locking wheel bolt kit (Extra long). Black plated 
Fits cars with spacers 12mm-15mm



Rusty old looking wheel bolts can spoil the look of your Porsche and even damage your alloy wheels.
Performance parts makers DesignTek have come out with a range of high quality locking wheel bolts to match their stainless wheel bolts range.

The Technical:
DesignTek wheel bolts are produced from SCM440 grade alloy steel which has good resistance to a wide variety of corrosive media including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is black-plated and salt spray tested 240 hours

Fits:
Porsche Boxster 986 / 987
Porsche 996 / 997
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608300002BLK

The product you are viewing cross references to these numbers

Locking Wheels Bolt Kit in Stainless Steel. Plated Black 
Fits cars without spacers or with spacers upto 7mm



Rusty old looking wheel bolts can spoil the look of your Porsche and even damage your alloy wheels.
Performance parts makers DesignTek have come out with a range of high quality locking wheel bolts to match their stainless wheel bolts range.

The Technical:
DesignTek wheel bolts are produced from SCM440 grade alloy steel which has good resistance to a wide variety of corrosive media including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is black-plated and salt spray tested 240 hours

Fits:
Porsche Boxster 986 / 987
Porsche 996 / 997
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608300001BLK

The product you are viewing cross references to these numbers

Exhaust 200cell catalyst pipes. Cars with petrol particulate filter



Fits:

Porsche 991.2 3.0L Carrera

Free-flowing reduces catalyst pipes replace the bulky & restrictive factory catalytic converters; designed specifically for maximum flow during racing or competition.

FEATURES:
• Maximizes power and throttle response while decreasing back pressure.
• Partially removes the catalytic converters for higher exhaust flow and performance.
• Constructed from high-quality stainless steel for optimum flow and maximum durability.
• Direct replacement bolt-on for stock cat or Sport Cats

DISCLAIMER: This product reduces the OEM catalytic converters on the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains 200 cell catalyst, which might give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Sport cat pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Slight modification around lambda sensor might be required in order to fit this.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109913

The product you are viewing cross references to these numbers

Exhaust cat bypass pipes. Cars with petrol particulate filter

Fits:

Porsche 991.2 3.0L Carrera

Free-flowing straight pipes replace the bulky & restrictive factory catalytic converters; designed specifically for maximum flow during racing or competition.

FEATURES:
• Maximizes power and throttle response while decreasing back pressure.
• Completely removes the catalytic converters for maximum exhaust flow and performance.
• Constructed from high-quality stainless steel for optimum flow and maximum durability.
• Direct replacement bolt-on for stock cat or Sport Cats

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Slight modification around lambda sensor might be required in order to fit this.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109910

The product you are viewing cross references to these numbers

DesignTek Valvetronic switchable sports exhaust system gives smooth power and torque to the wheels. Valves operated electronically.



Fits:
Porsche Boxster 982 (718)
Porsche Cayman 982 (718)

This system comes complete with Stainless steel Tail pipes in black finish.

Direct replacement for the factory mufflers. Compatible with OE catalytic converter pipe.

High-Performance Rear Exhaust with sound switch:

Switch closed: Deep Sports Sound

Switch opened: Racing Sports Sound

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606007183

The product you are viewing cross references to these numbers

DesignTek Race Exhaust Switachable turbo-back cat bypass system with Black Diamond tail pipe. Titanium.



Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.

Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.

Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009106

The product you are viewing cross references to these numbers

DesignTek Race Exhaust Switachable turbo-back cat bypass system with Black Diamond tail pipe. Stainless steel.



Fits:
Porsche 991.2 Carrera (except Turbo / GT3 / R)
For cars with Sport exhaust fitted or cars with sport exhaust bumper conversion (centre exit pipes)
Not suitable for cars built after April 2018 which have PPF fitted.

Please note: This system does not come with valve control system as you can use existing wiring from your sport exhaust. If you wish to have a wireless remote control kit you need to order one here in the basket stage.

Please note: These catalytic bypasses will make your car sound a lot louder than with stock cats. This exhaust is intended for offroad use and will be very loud . We recommend to use sport exhaust if you are concerned about decibel levels.

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009105

The product you are viewing cross references to these numbers

Exhaust sport switchable silencer in titanium.

Fits:
Porsche 992.1 Carrera 3.0L
Porsche 992.1 Turbo 3.8L

• The Exhaust Sport switchable Silencer is a performance upgrade designed specifically for Porsche 992 Carrera and Turbo models.
• Made out of Titanium
• This silencer replaces the stock exhaust system with a adjustable throttle. The motors are not included and would have to be transferred over from old exhaust 
• The switchable system allows drivers to switch between different modes*, offering a quiet and more subdued exhaust note for daily driving, and a louder, more aggressive sound for spirited driving or track days.
  *if your car hasn't got the sport button on the console, the exhaust will still operate from closed to open by default depending on the rev range of the car.
• The upgraded silencer enhances the overall exhaust flow, reducing backpressure and increasing horsepower and torque output.
• It can provide a deeper, more exhilarating exhaust note, offering a more sporty and engaging driving experience.
• Consider local regulations and laws regarding emissions and noise levels before purchasing and installing this upgrade.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109929

The product you are viewing cross references to these numbers

Sports switchable X-Pipe exhaust.

Fits:
Porsche 992.1 Carrera 3.0L
Porsche 992.1 Turbo 3.8L

This exhaust is an aftermarket exhaust that may require minor modification, loosening up manifolds, work on heatshields etc in order to accommodate it.  

• This Sports switchable X-Pipe exhaust is a performance upgrade designed specifically for Porsche 992 Carrera and Turbo models.
• Made out of 304 grade stainless steel
• This replaces the stock exhaust muffler with an adjustable X-Pipe. The motors are not included and would have to be transferred from the original exhaust 
• The switchable system allows drivers to switch between 2 different modes, offering 50mm X-pipe improved scavenging and low-speed power, and a 70mm non-converging straight-through, more aggressive sound for spirited driving.
• The upgraded exhaust enhances the overall exhaust flow, reducing backpressure and increasing horsepower and torque output.
• Providing deeper, louder and more exhilarating exhaust notes, offering a more sporty and engaging driving experience.
• Consider local regulations, noise levels and laws regarding emissions before purchasing and installing this upgrade.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109927

The product you are viewing cross references to these numbers

 

TUV APPROVED

Fits:
Porsche 987.1 Boxster / Boxster S - 2005 to 2008
Porsche 987.1 Cayman / Cayman S - 2005 to 2008

Ideal for enthusiasts seeking a more conservative sound enhancement, this muffler is particularly suited for those running cat bypass or sport cats who want to avoid excessive noise levels. At low RPMs and during cruising, it delivers a refined, deep tone that remains discreet. Designed to comply with Germany's stringent urban decibel regulations, this is a German Edition muffler built for subtle performance.

DesignTek offers a wide selection of mufflers to suit diverse preferences, ranging from mild, street-friendly options to exotic-sounding sport mufflers and high-intensity race mufflers. The DesignTEk Edition 987.1 street muffler stands apart from conventional aftermarket designs.

Crafted from German V2A - X5CrNi18-10 - 1.4301 (T-304 L) lightweight stainless steel, it incorporates advanced features like double perforated sound absorption tubes in a trapezoidal pattern with variable perforation diameters. This design effectively isolates and dampens unwanted drone frequencies. Additional stamped ribbing on the outer shell further reduces unwanted resonance, achieving superior acoustic performance.
Unlike traditional baffle plates, this design minimizes back pressure, particularly at higher gas velocities, resulting in improved throttle response and enhanced performance across the rev range. When combined with software tuning, upgraded intakes, or additional exhaust modifications, the benefits are even more pronounced.

This muffler offers a subtle factory motorsport sound, making it an excellent choice for those who desire a conservative sport tone. Its reduced decibel output ensures it remains suitable for vehicles equipped with sport cat or cat bypass headers, maintaining an enjoyable sound without becoming overly loud.

Each system undergoes rigorous testing for exhaust gas flow, thermal durability, resistance to cracking, and long-term reliability, ensuring exceptional quality and performance.

Features:

• Increases by 9 HP and 11 TQ
• Weighs 43 lbs. (19.5 Kg)
• German V2A - X5CrNi18-10 - 1.4301 (T-304 L) stainless steel for improved durability
• Includes dual round 3.5” (90mm) tips
• Direct bolt on replacement
• Increased decibels with an exclusive, exotic motorsport sound
• Software programming is not necessary

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

87050

The product you are viewing cross references to these numbers

Exhaust manifold with 200 cell catalytic converter. Porsche 997.2

Fits:
Porsche 997.2 Carrera 2009-12

Made out of 304 grade stainless steel. You may need lambda extensions if your car has engine check light on after installation.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109978

The product you are viewing cross references to these numbers