Elephant Racing

Front QuickChange™ Blade Style Sway bar

1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Front and Rear QuickChange™ Blade Style Sway Bar System

Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.

Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.

The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts

Perfect Geometry

Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.

Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.

Lightweight

Hollow bar reduces weight.

Fast and Easy Adjustment

No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.

For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

227002

The product you are viewing cross references to these numbers

Sway bar mounting backer plate kit
1 kit required per car



Fits
Porsche 911 - 1974 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

For Retro-Fitting the Through Body Anti Roll Bar

Required for Adjustable sway bars when installed on cars not originally equipped with a through body sway bar. These plates fit to the back side of the wheel well and distribute the sway bar load to prevent tearing.

Generally required for all 911/912/914/930 from 1974-1989 with A arm mounted anti roll bars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270024

The product you are viewing cross references to these numbers

Adjustable front sway bar drop links.
1 kit required per car



Fits
Porsche 991.1 and 991.2 C2
Porsche 991.1 and 991.2 C4
Porsche 991 GT3
Porsche 991 GT3 RS

NOT FOR PDDC


Adjustable Drop Links
The ideal sway bar (anti roll bar) is completely unloaded at static ride height. Stock drop links almost always preload the sway bar since the car doesn't sit perfectly level due to asymmetries such as driver weight. Our front and rear adjustable-length drop links for C4/C2 allow you to eliminate preload of the sway bar for maximum performance.

A preloaded sway bar shifts the weight carried by each of the tyres, increasing grip on weighted ones at the expense of decreasing grip on un-weighted ones. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tyre locks up first. Preload can be completely eliminated by adjusting drop link length and sway bar performance optimized.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2271003

The product you are viewing cross references to these numbers

Rear retro RSR adjustable sway bar.

Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976

Retro RSR Adjustable Sway Bar System

Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.

Drop links

Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.

Lightweight

Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings

Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.

Through-body style front bar

Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.

Retro-Look Arms

Steel arms are similar to the original RSR type and have drilled adjustment positions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1-RSRRSBA

The product you are viewing cross references to these numbers

Rear hollow sway Bar.
Kit sold individually -2 required per car

Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Save Expensive Thermostats And Oil Lines

Stripped threads are a common problem when removing oil lines from the external thermostat.
The aluminum thermostat threads become fused to the steel tube nut that secures the oil lines. If you get enough leverage to force the nut free, it takes the aluminum threads along with it – destroying the expensive thermostat and the oil line.

Elephant Racing has the solution; we manufacture a 30mm tube nut replacement kit that let's you save thermostats and oil lines.
If your oil lines won't come free from the thermostat, use a cut-off wheel to slit the side of the tube nut. You can then break the nut free using a cold chisel. This technique sacrifices the tube nut to save the expensive thermostat.

You then use our kit to replace the tube nut that was cut off. Both the oil line and the thermostat are saved.

The kit provides a 2-piece tube nut. The threaded nut fits over the end of the tube and is slipped on first. A spring lock ring is then slipped on. The spring lock ring cinches down on the tube, preventing the nut from coming off

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

0170000

The product you are viewing cross references to these numbers

Spring plate rubber bushing kit
1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976

Choice of Compound

Trailing arm bushings are available in "Sport" and "Stock" hardness.

Stock Hardness
Replicates the OEM rubber to ensure factory ride quality and performance levels.

Sport Hardness
Sport bushings have a harder rubber compound for less deflection and more precise handling.
Sport provides a nice intermediate step between our Stock rubber trailing arm bushings are our top performing WeatherSealed Monoballs.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22900

The product you are viewing cross references to these numbers

Spring plate bushing tool.
1 required per lifetime.



Fits:
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976
Porsche 944 - 1982 to 1991
Porsche 968 - 1995 to 1995

We've developed this tool to simplify removal of spring plate bushings. The bushings are bonded to the spring plate, and removal is not easy.

This convenient cutting tool shaves the bushings off, removing nearly all the rubber thereby greatly simplifying the bushing removal process.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2061002

The product you are viewing cross references to these numbers

Bolt-on adjustable bump steer kit
1 kit required per car



Fits
Porsche 911 - 1969 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976
Porsche 944 - 1985 to 1991


Adjustable, Bolt-on and Weather Sealed

Fully adjustable adding from .5 to 1.25 inches of spacing in .125 inch increments.

Bump Steer Adjustable – Fully adjustable adding .5 to 1.25 inches of spacing in .125 inch increments. Yoke type spacer grips stock steering knuckle for added strength.

Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Rubber boots seal out dirt and and water for extended life.

Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods

Spindle Height – Suitable for spindle height ranging from stock up to 19mm.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2110901

The product you are viewing cross references to these numbers

Spring plate bush kit
1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 914 - 1970 to 1976
Porsche 912 - 1976 to 1976


Precision Steering Under Pressure

Our top-performing bump steer solution is super strong and provides the sharpest, most predictable steering response. It eliminates steering knuckle twist induced toe steer and can be used on raised spindles of any height.

Double steering knuckle – Holds tie rod end between two steering knuckles to eliminate knuckle flex regardless of bump steer spacer length.

Long bump steer spacers (required with raised spindles) place bending loads that twist stock steering knuckles. Twist causes undesired toe steer.

Second steering knuckle is welded to the strut body

Bump steer adjustable – allows massive bump steer adjustment range in .125 inch increments. Double shear mounting provides solid support for even the longest bump steer spacing.

Rod End – Weather sealed precision rods ends included work with regular turbo tie rods. Included boots to seal out dirt and and water for extended life.

Our purpose-made rod ends are extra long to ensure proper threaded engagement with standard turbo tie rods

Spindle height – Kits available for 19mm, 30mm, 40mm spindle height.
Kits are easily modified for use with essentially any spindle height.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

211090

The product you are viewing cross references to these numbers

Lower wishbone ball joint rebuild kit.
Kit for both arms - 1 kit required per car



Fits
Porsche 944 - 1985/2 to 1991 - Aluminium lower arms
Porsche 968 - 1992 to 1995


Rebuild Your Worn Ball Joints

This kit allows replacement of the ball joints on Porsche 944 cars with aluminium lower control arms.

You can easily replace the aluminium control arm ball joints with units that are better than those that the car was delivered with.
No special tools required and no machine work is necessary.

Kit includes solid aluminium bronze internal bushings, forged chromolly ball pins and lower plates with grease fittings.
One kit will replace the ball joints on both control arms.

Feb 1985 to 1995 944 cars with aluminium lower arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1-RB944

The product you are viewing cross references to these numbers

Sport rubber lower wishbone caster block
Sold individually - 2 required per car



Fits
Porsche 944 - 1985/2 to 1991 - Aluminium lower arms
Porsche 968 - 1992 to 1995

Restore Ride and Performance

A true rubber replacement bushing for the factory caster block.
"Sport" hardness rubber compound improves performance by reducing deflection under load, while maintaining the ride characteristics of rubber.

Rubber is the choice if you want to restore factory ride and performance

Feb 1985 to 1995 944 cars with aluminium lower arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2290012

The product you are viewing cross references to these numbers

QuickChange spring plate kit
1 kit required per car



Fits
Porsche 356A
Porsche 356B - T5 Models


Change Torsion Bars and Adjust Ride Height

QuickChange spring plates make fast-work of torsion bar re-indexing and replacement.
Screw-type adjuster makes corner balancing and ride height adjustment a breeze. Pairs the high quality of the factory design with ease of servicing.

Setup is fast and easy
If you've ever re-indexed torsion bars to correct ride height, you can really appreciate the benefits of QuickChange.
Used in combination with our QuickChange Torsion Bars and Polybronze bearings, this spring plate allows rapid replacement or re-indexing of torsion bars.

• 5 minute torsion bar changes
• Fast and easy ride-height adjustment
• Accepts standard bushings

QuickChange Torsion Bar Changeout

QuickChange Torsion Bars can be extracted through the QuickChange Spring Plate without removing any bolts. Alignment settings are maintained. You don't even need to remove the wheel from the car. Changing torsion bars is a 5 minute per side operation!

Unlike other aftermarket spring plates, QuickChange Spring Plates bolt the plates together. This prevents the plates "halves" from sliding against each other and eliminates failures and metallic clicking noises common with competing products.
Can be used with any torsion bar and bushing that fits factory spring plates – not included – however QuickChange Torsion bars and PolyBronze Bearings are required to use torsion bar extraction features.

356 used two different systems of of spring plates, cover plate, bushings, and torsion bars

Pre-A, C and CS chassis:
Came equipped with 553mm long torsion bars. Cover plates have no center hole and a 4-nub style bushing. Spring plates have a short "tube" section that is not visible when installed because it does not pass through the cover plate. Outer bushings are larger 48mm Id and inner bushings have a smaller 45mm ID.

Polybronze may be used on these spring plates by fashioning a sleeve for the spring plate to increase its diameter to 48mm, and converting to a round bushing type coverplate.

Alternativley Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars can be used on these cars provided all 4 components (torsion bars, cover plate, spring plate, bushings) are converted together.

A and B chassis:
Came quipped with 627mm long torsion bars. Cover plates have a hole in the center. Spring plates have a visible "tube" section that passes through the cover plate. Both inner and out bushings are larger ID about 48mm.

Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars are all designed for direct fit with this combination.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2080908

The product you are viewing cross references to these numbers

Spring plate bearing kit with cover plates.
1 kit, req'd per car

Fits
Porsche 356 1948 - 1965

with Long tube spring plates or QuickChange spring plates

Spring plate bearing kit

Want to experience precision driving, faster lap times, improved road feel and feedback?

Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation. Regular polyurethane/plastic suspension bushings are obsolete!

PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.

✔ No Squeaks
✔ Smooth ride quality
✔ Easy installation
✔ Integral Grease fittings and grooves

Why PolyBronze Bearings Are Superior To Plastic Bushings

Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is “grippy” with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tire adhesion.

PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.

The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality.

356 used two different systems of of spring plates, cover plate, bushings, and torsion bars

Pre-A, C and CS chassis:

Came equipped with 553mm long torsion bars. Cover plates have no centre hole and a 4-nub style bushing. Spring plates have a short “tube” section that is not visible when installed because it does not pass through the cover plate. Outer bushings are larger 48mm Id and inner bushings have a smaller 45mm ID.

Polybronze may be used on these spring plates by fashioning a sleeve for the spring plate to increase its diameter to 48mm.

Alternatively Elephant Racing Polybronze, QuickChange spring plates, and Torsion bars can be used on these cars provided all 4 components (torsion bars, cover plate, spring plate, bushings) are converted together.

A and B chassis:

Came equipped with 627mm long torsion bars. Cover plates have a hole in the centre. Spring plates have a visible “tube” section that passes through the cover plate. Both inner and out bushings are larger ID about 48mm.

Elephant Racing Polybronze bearings are designed for direct fit with this combination.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2061601

The product you are viewing cross references to these numbers

Spring plate PolyBronze bearings



Fits
Porsche 924 - 1976 to 1988
Porsche 944 - 1982 to 1991
Porsche 968 - 1992 to 1995

High Performance Bushing Replacement - No Squeaks
Protected by US Patent 7,325,796

Want to experience precision driving, faster lap times, improved road feel and feedback?

Our patented PolyBronze suspension bearings set a new standard for performance, ride quality and ease-of-installation.
Regular polyurethane/plastic suspension bushings are obsolete!

PolyBronze is a precision bronze bearing encased in a polyurethane jacket. The combination delivers a smooth-ride with the extreme performance of a metal bearing.

• No Squeaks
• Smooth ride quality
• Easy installation
• Integral Grease fittings and grooves
• Extremely low friction

PolyBronze bearings are superior to plastic bushing alternatives, here's why:

Suspension mounts are coarse sheet metal pressings. They tend to be out-of-round and have irregularities that deform ordinary polyurethane bushings, pinching and binding the friction surface. Polyurethane is "grippy" with an inherently high coefficient of friction and combined with pinching polyurethane bushings create a lot of friction. The result is a harsh ride and reduced tyre adhesion.

PolyBronze have a rigid bronze bearing core that does not deform. The polyurethane jacket absorbs mount irregularities while the bronze inner bearing remains true, providing a free-moving machined-fit that rides on a precision race. Provided grease fittings make re-lubrication a breeze and a figure 8 groove keeps grease in place.

The combination delivers zero squeaks and friction-free suspension movement. Well suited to street or track, ride quality. PolyBronze bearings replace compressible factory rubber bushings.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2231800

The product you are viewing cross references to these numbers

Adjustable rear drop link kit.
1 kit required per car

Fits
Porsche 911 - 1978 to 1989
Porsche 911 turbo - 1978 to 1989

Upgrade your factory rear swaybar (anti roll bar) with our adjustable drop links.
These attach to the camber adjustment holes on the spring plates.

Teflon-lined precision rod ends for added durability and increased articulation.

Fully weather-sealed to extend bearing life



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2271002

The product you are viewing cross references to these numbers

Adjustable front drop link kit.

Fits
Porsche 911 - 1966 to 1973
Porsche 912 - 1966 to 1969

1 kit required per car

Upgrade your factory front through body type swaybar (anti roll bar) with our adjustable drop links.

Left / Right threaded ends make for easy length adjustment to eliminate pre-load.
Oversized teflon-lined precision rod ends for added durability and increased articulation.

Fully weather-sealed to extend bearing life



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2271001

The product you are viewing cross references to these numbers