摇臂及衬套

Wishbone Front UPPER. SET OF 2.
This OE Match Front upper control arm set includes both left and right arms and all required OEM hardware for correct installation. This kit directly replaces the factory upper wishbones used on Porsche Panamera (970.2, 2014–2016) models.

Fits:
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 13, 14, 15, 16.

Set Includes:
2 ×  OE Match Front Upper Control Arms (97034105123 Left & Right)
with Genuine Porsche Hardware:
2 × PAF102902 (Mounting Bolts),
2 × PAF102861 (Self-Locking Nuts)

Each arm is precision-machined from forged aluminium alloy for strength and reduced unsprung weight. They feature pre-installed rubber-metal bushings and sealed ball joints, tuned to match Porsche’s original damping and articulation characteristics.

Paired with Genuine Porsche PAF102902 bolts and PAF102861 self-locking nuts, this kit ensures secure fastening, accurate torque retention, and long-term suspension stability — exactly as Porsche intended.

Front upper control arms are critical for maintaining suspension alignment and cornering stability. Over time, bushings deteriorate and ball joints loosen, leading to uneven tire wear, steering play, or knocking noises.

Replace this full set when:
• Front-end noises appear over bumps or turns
• Vehicle drifts or alignment repeatedly goes out of spec
• Suspension bushings are cracked or separating
• Performing a geometry correction or full suspension refresh

Installing the OE Match 97034105123 Set with Genuine Porsche bolts and nuts ensures your Panamera’s suspension operates with factory-level precision, comfort, and safety.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97034105123

您正在查看的产品与这些编号存在交叉引用关系

完整前下控制臂套件， 2 套
该前下控制臂全套包括左、右下叉臂（97034105324 + 97034105424）以及专业安装所需的所有相关衬套、球头和工厂式安装硬件。
该套件专为保时捷 Panamera（970.2 系列）设计，可恢复车辆的原厂悬架几何形状，保持精确的外倾角、主销后倾角和前束角，从而实现卓越的操控性和驾乘舒适性。每个控制臂均按照保时捷原厂规格制造。预装橡胶金属衬套和密封球头，确保运行平稳、噪音低且使用寿命长。

适合:
保时捷 970.2 Panamera 2014 - 2016

图表参考编号 1 - 10、19、21。

随附的原厂制造硬件（包括螺栓、垫圈和自锁螺母）可确保在负载下实现完美的扭矩保持力和结构可靠性。这套完整套件可直接安装，用于完整的前悬架修复。

•位置：前轴 - 左下和右下
•功能：将底盘连接到轮架，保持外倾角、主销后倾角和前束角
•优点：符合 OE 规格的几何形状、完整的安装硬件、安静的驾驶体验、长期的可靠性
•安装：直接安装；成对更换；扭矩符合保时捷规格；安装后需要进行车轮定位

前下控制臂承受连续的负载和铰接，随着时间的推移，衬套会变硬，球窝接头会产生间隙，导致咔嗒声、振动和对准不良。

在以下情况下请更换此全套套件：
•车辆在颠簸路面上出现前端撞击或振动
•轮胎磨损不均匀或转向感觉松动或不稳定
•衬套或球窝接头出现明显磨损或开裂
•执行前端重建或几何校正

这款 OE Match 完整臂组提供了全面、平衡修复保时捷前悬架所需的一切 - 提供新车时灵敏的操控性和乘坐舒适性。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

97034105X24

您正在查看的产品与这些编号存在交叉引用关系