所有消音器/消声器

Fabspeed 排气谐振器旁路 x 管。



自由流动的管道取代了工厂的中管和共振器，以改善排气流量、增加功率并增强排气音。
消除共振腔将让您的 Panamera V6 拥有更加原始的声音。音量会显著增加。（不建议与我们的 Maxflo 排气管结合使用，因为系统声音太大）

特征：
•适合保时捷 970 Panamera V6（非涡轮增压）车辆（2010-2016 年）
• 与工厂谐振器相比，重量显著减轻
• 由 14-16 号规格 CNC 芯轴弯曲的 T304 不锈钢管制成
• 在整个 RPM 范围内功率显著提升
• 保证无 CEL（检查引擎灯）
• 简单的 DIY（自己动手）螺栓安装，无需切割或焊接
• 所有 Fabspeed 性能产品均享受 Fabspeed 终身保修

笔记：

需要在工厂排气断点处进行微小切割以安装 Fabspeed 产品（参考 OEM 上的凹坑位置）

请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR970V6XP

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed 排气谐振器旁路 x 管。



用我们自由流动的 X-Pipe 替换您限制性强、沉重的中管共振器，以改善排气流量、增加功率并增强排气音。

声音：从您的 GTS Panamera 中释放出更具攻击性的 V8 排气声。我们的 X-Pipe 为 GTS 提供了更高音调的赛车音调。

特征：

•适合所有保时捷 970 Panamera GTS (4.8L V8) 车辆（2010-2016 年）
• 采用14-16 号规格、CNC 芯轴弯曲 • T304 不锈钢管制成。
• 在整个 RPM 范围内功率均有显著提升。
• 不满足 CEL（检查发动机灯）和排放标准
• 简单的 DIY（自己动手）螺栓安装，无需焊接
• 所有 Fabspeed 性能产品均享受 Fabspeed 终身保修

请注意：这是按订单生产的特殊订单商品。在某些情况下，请留出 4 - 5 周的时间进行交货。一旦您下订单，就无法取消此供应商的特殊订单商品。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR970GTSXP

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed 排气谐振器旁路 X-Pipe。
自由流动的 X-Pipe 取代了工厂的中管和共振器，以改善排气流量、增加功率并增强排气音。

特征：
•适合 2010 年及以后的 970 Panamera Turbo / Turbo S 车辆
• 由 14-16 号规格 CNC 芯轴弯曲 T304 不锈钢管制成。
• 在整个 RPM 范围内功率都有显著提高。
• 不符合 CEL 和排放标准。

请注意：此为特殊订单商品，需按订单生产。部分情况下，请预留4至5周的配送时间。特殊订单商品一旦下单，将无法取消。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR970TXP

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed Maxflo 性能排气系统。
Maxflo 性能排气将为您的 970 GTS 提供动力提升、重量减轻以及在整个 RPM 范围内产生更嘶哑、更深沉的排气音；包括豪华四风格尖端。

特征：
•适合所有保时捷 970 Panamera GTS（4.8L V8）车辆（2010-2016 年）
• 提高动力和油门响应
• 包含 Fabspeed 豪华四头风格尖头，您可以选择不同的饰面
• 在整个 RPM 范围内改善跑车的声音和动力
• 采用高品质 14-16ga CNC 芯轴弯曲 T304L 不锈钢制成，可实现最佳流动性和最大耐用性
• 简单的 DIY（自己动手）螺栓安装，无需焊接
• 所有 Fabspeed 性能产品均享有 Fabspeed 终身有限保修

声音：
让您的 Panamera 发出强劲的 V8 咆哮。相比原厂系统，排气声浪将更加响亮深沉。

笔记：
需要在工厂排气断点处进行微小切割以安装 Fabspeed 产品（参考 OEM 上的凹坑位置）

请注意：此为特殊订单商品，需按订单生产。部分情况下，请预留4至5周的配送时间。特殊订单商品一旦下单，将无法取消。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR970GTSMAX

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed Maxflo 性能排气系统。

在整个 RPM 范围内，通过更嘶哑、更深沉的排气音来提高功率并减轻重量；包括黑色、抛光或碳纤维豪华四式尖端

特征：
•适合所有保时捷 970 Panamera Turbo/Turbo S 车辆（2010 年以后），包括 Executive 车型
• 提高动力和油门响应
包括 Fabspeed 豪华四头式尖端，抛光铬或黑铬饰面
• 在整个 RPM 范围内改善跑车的声音和动力
• 采用高品质 14-16ga CNC 芯轴弯曲 T304L 不锈钢制成，可实现最佳流动性和最大耐用性
• 直接用螺栓固定替换限制性的工厂消声器
• 所有 Fabspeed 性能产品均享有 Fabspeed 终身有限保修

请注意：此为特殊订单商品，需按订单生产。部分情况下，请预留4至5周的配送时间。特殊订单商品一旦下单，将无法取消。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR970TMAX

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust loud silencers.
With electronic exhaust valve



Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual


RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system

Sports exhaust loud silencers.
Loud version without exhaust valve



Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

Sports exhaust silencers.
With electronic exhaust valve



Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual


RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system

Sports exhaust silencers.
Without electronic exhaust valve



Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016

This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual


RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system

Sports exhaust silencers.
Without exhaust valve



Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)

his exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip

END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip

SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible