前减震器部件

Front shock absorber spring support seat (lower).



Fits:
Porsche 981 Boxster 2012-16
Porsche 982 Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C Cayman 2017>>
Porsche 991.2 2012-16
Porsche 991.1 2017-19
Porsche 992.1 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 3



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9P1411189

您正在查看的产品与这些编号存在交叉引用关系

Front shock absorber top mount underlay pad. Upper



Fits:
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 981 Spyder 2016

Porsche 982 Boxster 2017-2021
Porsche 982C Cayman 2017-2021

Porsche 991.1 Carrera 2012-2016
Porsche 991.1 Turbo 2014-2016 

Porsche 991.2 Carrera 2017-2016
Porsche 991.2 Turbo 2017-2020

Porsche 992.1 Carrera 2019-2021
Porsche 992.1 Turbo 2020-2021

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

用于前轴减震器顶部安装座的六角螺母 M8。

适合:
保时捷 986 Boxster 1997>>2004
保时捷 987.1 Boxster MKI 2005>>2008
保时捷 987.1 Cayman MKI 2005>>2008
保时捷 996（所有车型）1998>>20 05

保时捷 997.1（所有车型）MKI 2005>>2008

适合参考图号 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PAF003923

您正在查看的产品与这些编号存在交叉引用关系

Offset camber plates.
Sold as a pair - 1 pair, required per car



Fits Front
Porsche 981 Boxster and Cayman
Porsche 718 Boxster and Cayman
Porsche 991 Carrera, Carrera 4
Porsche 991 Carrera S, Carrera 4S

More Camber and Caster

Our offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.

These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.

Higher Performance

Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons

– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.

– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.

Use Stock Springs or Coilovers

Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

21522

您正在查看的产品与这些编号存在交叉引用关系

Rennline Clubsport 外倾板顶部安装套件。
2 件套



适合：
保时捷 991/981/718 2WD（GT3/GT4 除外）

无论您在街道还是赛道上使用汽车，最佳外倾角设置对于街道和赛道上激烈驾驶时的性能和轮胎磨损都至关重要。这些板是为希望获得额外外倾角而无需更换 GT3 式可调控制臂的 991/981 车主设计的。通过使用偏置轴承座，外倾角调整范围可以改变，在所有 OEM 等效设置下提供额外的 1.1 度外倾角。

这些支架由 6061-T6 铝坯在内部 CNC 加工而成，强度最高，重量最轻。精密的聚四氟乙烯衬里轴承通过两部分螺纹外壳固定，消除了使用卡环的外倾角板常见的问题，例如噪音过大和过早失效。这还可以最大限度地减少负载下的外倾角变化，这意味着在最重要的时候您可以拥有更精确的对准设置。

专为使用原厂减震器和任何与 OEM 支架配合使用的售后市场设置的汽车而设计，这是在您的 991/981 汽车中获得外倾角的最简单方法。此外，通过在支柱顶部而不是控制臂处进行外倾角更改，可以最大限度地减少主销后倾角的变化，从而更容易设置并最大限度地减少必要的修改。

• 出厂设置下负外倾角增加 1.1*，从而带来更大的调整范围
• CNC 加工外壳
• 与采用工厂支架的工厂和售后减震器/弹簧套件完全兼容
• 均衡轮胎磨损并同时最大化牵引力
• 精密聚四氟乙烯内衬球形轴承
• 降低顺从性可实现更精确的处理和对准

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S54

您正在查看的产品与这些编号存在交叉引用关系

Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2



Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT

If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.

this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.

• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S55

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber additional spring. FRONT



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005-08
Porsche 987 MKII Boxster 2009>>
Porsche 987C Cayman 2005-08
Porsche 987C MKII Cayman 2009>>
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 Turbo 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634330102

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber additional spring. FRONT



Fits:

Porsche 986 Boxster 1997-04
Porsche 987.1 Boxster 2005-08
Porsche 987.2 Boxster 2009-12
Porsche 987C.1 Cayman 2005-08
Porsche 987C.2 Cayman 2009-12
Porsche 996 C2 / C4 / C4S 1998-05
Porsche 996 Turbo 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634330102

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber centring ring, 6.0mm, Rear axle



Fits:
Porsche 987.2 Boxster 2009-12
Porsche 987C.2 Cayman 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

98733350901

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber compensating plate. 
Front.



Fits:
Porsche 996 C2 1998-05
Porsche 997 C2 /C2S MKI 2005-08
Porsche 997 C2 /C2S MKII 2009-10
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>>
Porsche 987C Cayman 2005>>

Options:
- 3.0 mm
- 6.5 mm
Please select below

Diagram ref no 5

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9963435110

您正在查看的产品与这些编号存在交叉引用关系

减震器补偿板。
正面。



适合：
保时捷 996 C2 1998-05
保时捷 997 C2 /C2S MKI 2005-08
保时捷 997 C2 /C2S MKII 2009-10
保时捷 986 Boxster 1997-04
保时捷 987 Boxster 2005>>
保时捷 987C Cayman 2005>>

选项：
3.0毫米
6.5毫米
请选择以下

图表参考编号 5

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9963435110

您正在查看的产品与这些编号存在交叉引用关系

减震器锥形垫圈
正面

适合:
保时捷 986 Boxster 1997>>2004
保时捷 987 Boxster MKI & MKII 2005>>2012
保时捷 987C Cayman MKI & MKII 2005>>2012
保时捷 996 C2 / C4 / C4S / Turbo 1998年>>2005年
保时捷 997 C2 / C2S MKI & MKII 2005>>2012
保时捷 997 C4 / C4S MKI & MKII 2005>>2012

图表参考编号 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634351300

您正在查看的产品与这些编号存在交叉引用关系

减震器槽球轴承。前部

適用於:
保时捷 996 1998-05 C2 / C2S
保时捷 997 C2 / C2S MKI 2005-08
保时捷 997 C2 / C2S MKII 2009-10
保时捷 986 Boxster 1997-04
保时捷 987 Boxster 2005>>
保时捷 987C Cayman 2005>>

单击“放大”可查看大部件图。
图表参考编号 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634351505

您正在查看的产品与这些编号存在交叉引用关系

减震器沟球轴承，前部

適用於:
保时捷 996 1998-05 C2 / C2S
保时捷 997 C2 / C2S MKI 2005-08
保时捷 997 C2 / C2S MKII 2009-10
保时捷 986 Boxster 1997-04
保时捷 987 Boxster 2005>>
保时捷 987C Cayman 2005>>

图表参考编号 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99634351505

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber hexagon nut, M 14 x 1.5
FRONT



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Porsche 996 1998-05
Porsche 997 MKI 2005-08
Porsche 997 MKII 2009>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PAF103353

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber protective tube, Front.


Fits:
Porsche 997 GT3 2007-11
Porsche 991 Turbo GT2 RS 3.8L 2014>>(I475) For cars whit PASM electronic damper control)
Porsche 991 GT3 2014-17 (I475) For cars whit PASM electronic damper control)
Porsche 991 GT3 2018 >> (I475) For cars whit PASM electronic damper control)
Porsche 981 Cayman GT4

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99734356790

您正在查看的产品与这些编号存在交叉引用关系