前控制臂

PowerFlex 下臂中心衬套。



適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

2 套，用于前臂和后臂
请注意，这些部件应由工程师安装。

图表参考：
2 号 - 前部 / 5 号 - 后部

OEM 零件编号：996341053 / 996341941 / 997341041
OEM 零件编号：997341042 / 997341041
OEM 零件编号：997331053

Powerflex。 用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来以下好处：

- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 黑色系列 PFF57-502BLK
更换赛车下臂中心聚氨酯衬套。



適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

2 套，用于前臂和后臂
请注意，这些部件应由工程师安装。

图表参考：
2 号 - 前部 / 5 号 - 后部

OEM 零件编号：996341053 / 996341941 / 997341041
OEM 零件编号：997341042 / 997341041
OEM 零件编号：997331053

Powerflex 黑色系列- 专为赛道设计 - 随时准备比赛 - 精心打造，力求做到最好。

Powerflex 黑色系列衬套采用 95 Shore A 复合材料制成，可最大程度地控制底盘几何形状。这种复合材料的抗负载能力比标准橡胶高出 80%，硬度比我们的紫色高性能材料高出 25%。

如果您的要求纯粹是为了极致的操控性和底盘性能，那么 Powerflex Black 系列是独一无二的，可为您的底盘提供最精确、最准确的定位。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-502BLK

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 下臂外衬套“脚轮可调”

前控制臂外衬套配有轻质铝制可调节套管，可在车上调节脚轮，同样采用我们独特的聚氨酯衬套。

两套适用于两只下臂。
请注意，这些部件应由工程师安装。

适合：
保时捷 987 Boxster 2006>>
保时捷 987C Cayman 2005>>
保时捷 997 2006>>

请点击“放大”来查看图表。
图表重新编号 13。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-802

您正在查看的产品与这些编号存在交叉引用关系

Powerflex 下臂后衬套“外倾角可调”

前控制臂内衬套采用耐用的不锈钢可调套筒进行外倾角调节，该套筒在我们独特的油脂保持聚氨酯衬套中运行。

两套适用于两只下臂。
请注意，这些部件应由工程师安装。

適用於:
保时捷 987 Boxster 2006>>
保时捷 987C Cayman 2005>>
保时捷 997 2006>>

请点击“放大”来查看图表。
图表重新编号 13。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-801

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Black Series Lower Arm Rear Bush "Camber Adjustable"

Front control arm inner bush gives the camber adjustment with its durable stainless steel adjustable sleeve which runs in our unique grease retaining polyurethane bush.

Set of 2 for TWO lower arms.
Please note these parts should be fitted by an engineer.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Fits:
Porsche 987 Boxster 2006>>
Porsche 987C Cayman 2005>>
Porsche 997 2006>>

Please click 'Zoom in' to view the diagram.
Diagram re No 13.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-801BLK

您正在查看的产品与这些编号存在交叉引用关系

PowerFlex 下臂后衬套

更换赛车下臂后聚氨酯衬套。

2 套，用于两个前臂和后臂
请注意，这些部件应由工程师安装。

適用於:
前臂或后臂
保时捷 986 Boxster 1994-04
保时捷 996 1998-04
2 套下臂，可安装在前臂或后臂上。请注意，这些部件应由工程师安装。

適用於:
仅限后臂：
保时捷 987 Boxster 05>>
保时捷 987C Cayman 05>>
保时捷 997 05>>
2 套下臂，仅适用于 987 / 997 型号的后臂。请注意，这些部件应由工程师安装。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-503

您正在查看的产品与这些编号存在交叉引用关系

下叉臂中央衬套拆卸和安装工具。

需要 1 个工具

#大象赛跑#

适合
保时捷 986 Boxster -前部和后部
保时捷 987 Boxster 和 Cayman -前部和后部
保时捷 996 -前部和后部
保时捷 997 -前部和后部
保时捷 981 Boxster 和 Cayman -仅前部
保时捷 991 -仅正面

简化 Monoball 产品和更换衬套的安装过程。

我们的两件式杯形和活塞工具可轻松取出和插入衬套，无需拆卸轮架或控制臂。无需使用车间压力机。这些工具的设计精确贴合衬套周长，可防止衬套意外损坏并确保正确安装。

我们有用于 LCA 中央衬套、后直立 LCA 衬套和后直立减震器支架衬套的工具。

996、997、986、987 和 981 上的前后控制臂
前下控制臂仅适用于 991

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260019

您正在查看的产品与这些编号存在交叉引用关系

Lower control arm eccentric monoballs.
1 kit required per axle



Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 996 - Front and Rear
Porsche 997 - Front and Rear
Porsche 981 - Front and Rear
Porsche 718 - Front and Rear
Porsche 991 - Front Only

Our Eccentric Control Arm Monoball Cartridges replace inner rubber bushings with spherical bearings, providing low friction and precisely holding camber settings.
The eccentric design allows increasing or decreasing camber, as needed.

Increasing Camber

Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the 996/997 rear suspension, about .36 degree of negative camber on the Boxster rear suspension, and .39 degrees on the 996/997/Boxster front suspension.
Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.

Decreasing Camber

Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive & front camber about .39 degrees positive for 996/997 while Boxsters will get about .39 degrees positive front and .36 degrees positive rear.



Made from hardened steel, plated and weather-sealed, these bearings are made to last. Fits the front or rear stock and GT3 type control arms.

Sized to fit factory original control arms. Not compatible with some aftermarket replacement control arms that use a larger non-stock size bushing.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2260006

您正在查看的产品与这些编号存在交叉引用关系

BBi Autosport front/rear lower control arm kit for Porsche 996/997/991/987/981 except GT4
Fits cars with and without PASM



Features :

•   Improved two piece 996 GT3 lower control arm design
•   Stronger than cast motorsport Cup arms
•   Allows proper camber adjustment
•   Uses GT3 shims to adjust camber & lower control arm length (sold separately)
•   High-strength steel alloy spherical bearings, completely serviceable unlike the motorsports arms
•   Sealed monoball inner bearing
•   Allows easy access to inner arm hardware
•   Includes adjustable thrust arm bushings to adjust caster and wheelbase
•   A must have for all track and race enthusiast
•   Each kit includes pair of 2 arms
•   Fits both front and rear axles
•   Compatible with all 996/997/991/987/981 models except GT4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BBILOWRCNTRL9697

您正在查看的产品与这些编号存在交叉引用关系

Spacer kit for Eibach adjustable control arms 572610K.
This kit will allow the arms to be fitted onto cars with hydraulic bush.



PRICE IS FOR A SET OF 2.

Front or Rear Fitment:
Porsche 996
Porsche 986

Front Fitment only:
Porsche 997 GT2/GT3

Rear Fitment only:
Porsche 997 Carrera
Porsche 997 Turbo
Porsche 987
Porsche 981

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5.72612K

您正在查看的产品与这些编号存在交叉引用关系

RSS Lower Control Arm Kit for Porsche Models .
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

357

您正在查看的产品与这些编号存在交叉引用关系

RSS Lower Control Arm Kit for Porsche Models.
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

358

您正在查看的产品与这些编号存在交叉引用关系

这个单球衬套安装在下摆臂“棺材”臂的后部。



适用：
保时捷 986 Boxster
保时捷 987 Boxster
保时捷 987C Cayman
保时捷 996 1998-04
保时捷997
保时捷991
保时捷 981 Boxster
保时捷 981 Cayman

密封式单球轴承 - 前后 - 如今大多数保时捷车主，尤其是那些经常下赛道的车主，都会为爱车配备比原厂更宽、抓地力更强的轮胎，从而在过弯和制动时承受更高的横向加速度。在这种高强度驾驶情况下，橡胶悬挂衬套会因承受的巨大载荷而发生压缩和弯曲，破坏车辆精细调校的四轮定位，进而降低制动和过弯性能。单球轴承则是一种无副作用的改进方案；它消除了悬挂系统中四个重要的间隙来源，同时又不会增加车辆的行驶舒适性。您的保时捷将拥有更精准、更可预测的操控性和更清晰的路感反馈。Rennline 单球轴承采用 FK Motorsports 轴承，经镀镉处理并密封，可防止因潮湿或灰尘污染而导致的过早磨损，确保其在赛道或公路上的使用寿命更长。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S18SETOF2

您正在查看的产品与这些编号存在交叉引用关系

适用于 Eibach 572610K 的替换球头

#艾巴赫#

适合：
保时捷 987/981/997 (前臂)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

572613K

您正在查看的产品与这些编号存在交叉引用关系

ADJUSTABLE THRUST ARM BUSHING KIT (For vehicles equipped with Hydraulic Thrust Arm Bushings Only).
SET OF 4. FRONT AXLE ONLY



The RSS Adjustable Thrust Arm Bushing Kit will improve handling and response in 987. 997, 981, GT4, 991 GT3 variants, suspension systems and allows for additional caster adjustments. Eliminates unwanted caster changes in both front and rear suspension under acceleration and deceleration.

AVAILABLE FOR ALL PORSCHE® 987,981, GT4, 997, 991 and 991 GT3, and 991 TURBO
NOT FOR 997 GT3/GT2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

360

您正在查看的产品与这些编号存在交叉引用关系

RSS 前 LCA litronic 支架。



RSS 部件号 362 将可选的 Litronic 或自适应头灯系统与 Tarmac 系列下控制臂或 OE 2pc 臂集成在一起：

保时捷 986 前后，
保时捷 987 前部（987 后部见 #364），
保时捷 997 前后，
保时捷 981 前轴（981 后轴见 # 387），
保时捷 991 前部（除 GT3/RS 外）

RSS Tarmac 系列后下控制臂的适配器支架。- 每辆车轴 1 个（位于前后驾驶员侧轴上，连接到 OE 传感器臂）

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

362

您正在查看的产品与这些编号存在交叉引用关系