请稍候… 
我们正在处理您的订单,请稍候
请不要按返回按钮… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design91.uk/images/schemaLogo.png https://www.design91.uk/images/schemaLogo.png +443456003478 https://www.design91.uk Facebook Instagram

按品牌过滤
显示从1到13(共13个产品)
FOXEVOIIG997W
Product Information
Product Information
SpeedART FOX EVO II
Forged monobloc wheels in „modern-retro Fuchs design"

speedart

SET OF 4 wheels in Gold for Porsche 997 C4 / C4S / Turbo (Wide body)

Sizes:
Front: 8,5 x 20 ET/offset 45 *
* 0-7 mm spacers and longer bolts required (Not included)
Rear: 11 x 20 ET/offset 60*
* 21-25 mm spacers and longer bolts required (Not included)
FOXEVOIIS997W
Product Information
Product Information
SpeedART FOX EVO II
Forged monobloc wheels in „modern-retro Fuchs design"

speedart

SET OF 4 wheels in Silver for Porsche 997 C4 / C4S / Turbo (Wide body)

Sizes:
Front: 8,5 x 20 ET/offset 45 *
* 0-7 mm spacers and longer bolts required (Not included)
Rear: 11 x 20 ET/offset 60*
* 21-25 mm spacers and longer bolts required (Not included)
SUPERTURISMO911WIDER
Product Information
Product Information
20" wheel set 8,5J ET49 and 11.5J ET52 Cast HLT Alloy. With Centre Lock Look wheel cap.
5-Stud wheel - PCD 5X130

oz

Fits:
Porsche 997.1 Carrera 4 / 4S 2005-08
Porsche 997.1 Turbo 2007-09

Porsche 997.2 Carrera 4 / 4S / GTS 2009-12
Porsche 997.2 Turbo 2010-13

Certificates: TUV, JWL, VIA, NAD

  • WIND TUNNEL OPTIMIZATION: The first aftermarket wheel to be tested in a wind tunnel.The first aftermarket wheel with pure racing-derived appendages and aerodynamic details.
  • PRO-TESTED: Pure racing-derived shapes and aerodynamic details. A wheel that embodies all of Oz’s racing experience, put to the test under the most challenging conditions.
  • AERO FLAP TECHNOLOGY: Special F1-derived aerodynamic inserts reduce air drag. Aerodynamic inserts promote an aerodynamic effect with a look reminiscent of Formula 1 wheels.
  • BRAKE COOLING TECHNOLOGY: An airflow extraction system increases air circulation and improves heat dissipation. An F1-derived airflow extraction system increases air circulation, dissipating the heat generated during braking.
  • HLT TECHNOLOGY: Weight reduction, stiffness optimization, improved handling. Manufacturing technology that makes the wheel lighter – which further elevates performance dynamics – while ensuring the kind of structural integrity required to pass the most stringent safety tests. The exclusive HLT manufacturing process delivers mechanical characteristics comparable to those of a forged wheel, in terms of both weight reduction and structural strength.
  • CENTRAL LOCK CAP: The Central Lock Look CAP mimics the single-nut closure typical of racing wheels.
SUPERTURISMO911WIDE
Product Information
Product Information
20" wheel set 8,5J ET49 and 11J ET50 Cast HLT Alloy. With Centre Lock Look wheel cap.
5-Stud wheel - PCD 5X130

oz

Fits:
Porsche 997.1 Carrera 4 / 4S 2005-08
Porsche 997.1 Turbo 2007-09

Porsche 997.2 Carrera 4 / 4S / GTS 2009-12
Porsche 997.2 Turbo 2010-13

Porsche 991.1 Carrera 4 / 4S 2012-16
Porsche 991.1 Turbo 2014-16

Certificates: TUV, JWL, VIA, NAD

  • WIND TUNNEL OPTIMIZATION: The first aftermarket wheel to be tested in a wind tunnel.The first aftermarket wheel with pure racing-derived appendages and aerodynamic details.
  • PRO-TESTED: Pure racing-derived shapes and aerodynamic details. A wheel that embodies all of Oz’s racing experience, put to the test under the most challenging conditions.
  • AERO FLAP TECHNOLOGY: Special F1-derived aerodynamic inserts reduce air drag. Aerodynamic inserts promote an aerodynamic effect with a look reminiscent of Formula 1 wheels.
  • BRAKE COOLING TECHNOLOGY: An airflow extraction system increases air circulation and improves heat dissipation. An F1-derived airflow extraction system increases air circulation, dissipating the heat generated during braking.
  • HLT TECHNOLOGY: Weight reduction, stiffness optimization, improved handling. Manufacturing technology that makes the wheel lighter – which further elevates performance dynamics – while ensuring the kind of structural integrity required to pass the most stringent safety tests. The exclusive HLT manufacturing process delivers mechanical characteristics comparable to those of a forged wheel, in terms of both weight reduction and structural strength.
  • CENTRAL LOCK CAP: The Central Lock Look CAP mimics the single-nut closure typical of racing wheels.
9MFCW
Product Information
Product Information
Ninemeister F Classic 合金轮毂套装。
价格为一套4个轮子的价格

适用:
保时捷911
保时捷964
保时捷993
保时捷996
保时捷 997.1 / 997.2
保时捷 991.1 / 991.2
保时捷 992.1
保时捷 986 Boxster
保时捷 987 Boxster / Cayman
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman
保时捷 955 / 957 / 958 / 9YA Cayenne
保时捷 970.1 / 970.2 Panamera
保时捷 971.1 / 971.2 Panamera
保时捷 95B.1 / 95B.2 / 95B.3 Macan

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些车轮,以保持其强度、刚性和轻量化设计。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


9MLIGHT
Product Information
Product Information
Ninemeister 轻合金轮毂套装。
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些轮毂,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


9MMAGSLIGHT
Product Information
Product Information
Ninemeister出品的镁合金超轻轮组。
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

采用镁合金锻造工艺,重量比原装轮毂减轻高达 40%。

尺寸从 18 英寸到 21 英寸,采用 6061 锻造铝合金制成,具有高强度和高刚度。
我们采用业内领先的10,000吨压力来成型车轮,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


9MRLIGHT
Product Information
Product Information
Ninemeister R 轻合金轮毂套装。
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些车轮,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


9MSDIAL18
Product Information
Product Information
Ninemeister Speed Dial 两件式合金轮毂套装
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些车轮,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。




9MSLIGHT
Product Information
Product Information
Ninemeister 超轻合金轮毂套装。
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些车轮,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


9MSSTREET
Product Information
Product Information
Ninemeister出品的Superstreet合金轮毂套装。
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些车轮,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


9MSTWIST
Product Information
Product Information
Ninemeister Supertwist合金轮毂套装。
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些轮毂,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


9MTDC
Product Information
Product Information
Ninemeister Turbo DC合金轮毂套装。
价格为一套4个轮子的价格

适用:
保时捷964
保时捷993
保时捷996
保时捷997
保时捷 991
保时捷 992
保时捷 986 Boxster
保时捷 981 Boxster / Cayman
保时捷 718 Boxster / Cayman

请注意 - 轮毂均为定制产品,交货周期最长可达 12 周。

材质:锻造6061杉木,高强度刚度
我们采用业内领先的10,000吨压力来成型这些车轮,以保持其强度、刚性和轻量化设计。

可提供标准颜色或您的定制颜色(选择PTS选项)。

订购轮毂时,请在结账阶段的备注栏中注明所需的轮毂偏距(如果知道)和车辆详细信息。
如果不知道偏移量,请留下车辆详细信息(VIN),我们可以提供建议。


显示从1到13(共13个产品)
您可能也喜欢
流行车型