运动消音器/消声器

中央消音器删除组件。适用于保时捷运动排气系统（带阀门）和标准 OE 系统。

管道直径： 2.26英寸（57.50毫米）

适合:
保时捷 911 (997.2) 3.6L & 3.8L (C2 / C4 / S / GTS) 2009>>2012

零件组装：
MSPO247：中央消音器删除组件

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SSXPO130

您正在查看的产品与这些编号存在交叉引用关系

替换后部运动排气管套件 OE 款式。喷砂不锈钢。



适合：
保时捷 997 II 3.6L C2 / C4 2009-
保时捷 997 II 3.8L C2S / C4S 2009-

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99722097331S

您正在查看的产品与这些编号存在交叉引用关系

Fabspeed Maxflo 性能侧排气系统。

997.2 Carrera Maxflo 高性能侧排气系统取代了原厂侧消声器，提升了排气流量和整体动力，同时带来低沉浑厚的跑车声浪。该系统可与原厂排气管搭配使用，也可升级至豪华四管式排气管。

对于非 PSE 车型，Fabspeed 建议将这些侧消声器与中央消声器旁通 X 管配合使用。单独使用这些侧消声器与原厂非 PSE 中央消声器配合使用，其音质优势并不显著。

声音：
使用我们的 Maxflo 侧排气管，在整个 RPM 范围内获得略微更嘶哑、更深沉的排气音。

特征：
• 适合所有保时捷 997.2 Carrera 车辆（2009-2012 年）
（2012 年是分车型年，2012 款 911 Carrera 可能是 997.2 或 991，请在购买前确认您的车是 997.2 还是 991）
•与工厂组件相比，节省 8 磅
•在整个 RPM 范围内改善跑车的声音和动力
•采用高品质 14-16ga CNC 芯轴弯曲 T304L 不锈钢制成，可实现最佳流动性和最大耐用性
•直接用螺栓固定更换工厂侧消声器
•与 Fabspeed 的 Deluxe Quad Style Tips 兼容；也与 OEM Tips 兼容
•所有 Fabspeed 性能产品均享有 Fabspeed 终身保修

注意：该系统可与 OEM 插座尖端一起使用（配备 PSE 的汽车除外），或可升级为包含豪华四式尖端  （PSE 需要四个尖端）。

请注意：此为特殊订单商品，需按订单生产。部分情况下，请预留4至5周的配送时间。特殊订单商品一旦下单，将无法取消。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

FSPOR9972MAX

您正在查看的产品与这些编号存在交叉引用关系

DesignTek X-Pipe (primary muffler bypass) deletes the stock primary muffler and saves 6.4 lbs. from the rear of the vehicle. With a fast air flow the X-pipe increases BHP and Toque.



Made from high quality T304 14-16 gauge stainless steel, C.N.C. mandrel bent. The X-Pipe (primary muffler bypass) gives a great exotic car sound and power by about 5 decibels.

Fits:
Porsche 997 MKII

Click 'Zoom in' for large parts diagram.
3606009719 replace No 10.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009719

您正在查看的产品与这些编号存在交叉引用关系

后部运动排气装置，“超级声音”，不锈钢。



適用於:
保时捷 997.2 3.6L - 3.8L 卡雷拉 06/2008 - 12/2012

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1620613810

您正在查看的产品与这些编号存在交叉引用关系

后部运动排气管套件，不锈钢，抛光



適用於:
保时捷 997.2 3.6L - 3.8L 卡雷拉 06/2008 - 12/2012

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1620613710

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust silencer cross pipe Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces rear centre exhaust silencer



Fits:
Porsche 997 Gen 2 Carrera and Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning

PIPE FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system.

Sports exhaust silencer cross pipe Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces rear centre exhaust silencer and side silencer. This exhaust does not come with new tail pipes. Original tips will be compatible.




Fits
2 and 4wd cars
Porsche 997 Gen 2 Carrera
Porsche 997 Gen 2 Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system

Sports exhaust silencers Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces side silencers. This exhaust does not come with new tail pipes. Original tips will be compatible.



Fits Porsche 997 Gen 2 Carrera and Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system